LG Chem, Ltd

Products

Acrylonitrile-Styrene-Acrylate (ASA) NP05

    • Product Name: Acrylonitrile-Styrene-Acrylate (ASA) NP05
    • Chemical Name (IUPAC): Acrylonitrile-phenylethene-alkyl acrylate copolymer
    • CAS No.: 9011-18-1
    • Chemical Formula: (C8H8•C4H5N•C5H8O2)n
    • Form/Physical State: Pellets
    • Factroy Site:
    • Price Inquiry: sales6@ascent-chem.com
    • Manufacturer: LG Chem, Ltd
    • CONTACT NOW
    VTB
    Specifications
    HS Code 644699
    Product Name Acrylonitrile-Styrene-Acrylate (ASA) NP05
    Density 1.07 g/cm³
    Melt Flow Index 9 g/10min (220°C/10kg)
    Tensile Strength 48 MPa
    Elongation At Break 16%
    Flexural Modulus 2100 MPa
    Heat Deflection Temperature 94°C (0.45MPa)
    Vicat Softening Point 105°C
    Water Absorption 0.23% (24h, 23°C)
    Weatherability Excellent (UV and outdoor resistance)

    As an accredited Acrylonitrile-Styrene-Acrylate (ASA) NP05 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing The ASA NP05 is packaged in 25 kg moisture-resistant, sealed kraft paper bags with inner plastic lining for optimal protection during transport.
    Container Loading (20′ FCL) Container Loading (20′ FCL) for Acrylonitrile-Styrene-Acrylate (ASA) NP05: Typically 16–18 metric tons packed in 25kg bags on pallets.
    Shipping Acrylonitrile-Styrene-Acrylate (ASA) NP05 is shipped in sealed, moisture-resistant bags or containers, typically in 25 kg packages. It should be transported in clean, dry conditions, protected from direct sunlight, moisture, and physical damage. Ensure compliance with local regulations for handling and storage. Avoid exposure to extreme temperatures during transit.
    Storage Acrylonitrile-Styrene-Acrylate (ASA) NP05 should be stored in a cool, dry, and well-ventilated area, away from direct sunlight and sources of heat or ignition. Keep the material in tightly sealed, original containers to prevent moisture absorption and contamination. Ensure storage temperatures remain between 5–35°C. Follow all relevant safety guidelines and local regulations for handling and storage.
    Shelf Life Acrylonitrile-Styrene-Acrylate (ASA) NP05 typically has a shelf life of 12 months when stored in cool, dry conditions.
    Application of Acrylonitrile-Styrene-Acrylate (ASA) NP05

    Applications of Acrylonitrile-Styrene-Acrylate (ASA) NP05 in Industrial Manufacturing

    Acrylonitrile-Styrene-Acrylate (ASA) NP05 delivers high outdoor weatherability, color retention, and dimensional stability for polymer-based products exposed to challenging environments. As the actual manufacturer, we supply ASA NP05 to downstream processors who demand strict adherence to industry standards and precise integration into multi-step production lines for high-value components and assemblies.

    1. Automotive Exterior Components

    Automotive OEMs and Tier 1 suppliers select ASA NP05 for exterior parts that must withstand prolonged UV exposure, temperature fluctuation, and chemical agents such as road salts. This resin integrates into compound formulations for parts like mirror housings, pillar trims, grilles, and roof rails, where surface appearance and outdoor durability are critical to meet stringent OEM validation protocols.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    2. Outdoor Electrical Enclosures

    Manufacturers of weather-resistant electrical housings use ASA NP05 in compounds for meter boxes, distribution cabinets, and connection covers, ensuring long-term performance under sunlight, temperature extremes, and humidity. The resin’s retention of mechanical strength supports critical enclosure ratings, and its color stability means no secondary painting or coating is required to meet field service life expectations.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    3. Garden and Outdoor Furniture Components

    Producers of premium garden furniture and equipment apply ASA NP05 to achieve surfaces that resist discoloration and embrittlement over years of sun and moisture exposure. Its compatibility with wood-plastic composites and reinforced plastics broadens design flexibility for chair shells, table tops, and fencing elements that maintain aesthetics and function without periodic maintenance.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    4. Construction Roofing and Cladding Sheets

    Sheet manufacturers incorporate ASA NP05 as a cap layer for co-extruded roofing and wall panels, delivering color and gloss retention and dimensional stability on exposed surfaces. This ensures compliance with long-term weathering warranties and prevents degradation seen in older unprotected thermoplastics, especially in architectural, agricultural, and industrial buildings subjected to UV, rain, and contaminants.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    5. Sporting Goods and Recreational Equipment Shells

    Manufacturers of outdoor sporting equipment use ASA NP05 for molded shells and covers requiring impact endurance and retained appearance despite sun, rain, and frequent handling. Its chemical structure limits fading and maintains surface gloss, making it suitable for gear such as helmets, kayak hulls, and scooter panels that undergo seasonal outdoor use.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    6. Agricultural Equipment Housings

    Producers of exposed tractor trim, machinery panels, and irrigation device covers specify ASA NP05 to prevent rapid color shift and embrittlement under high-UV, temperature, and pesticide/fertilizer environments. The resin supports precision molding for tight-tolerance housings and enclosures that function throughout multiple growing seasons in open fields.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    Free Quote

    Competitive Acrylonitrile-Styrene-Acrylate (ASA) NP05 prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.

    We will respond to you as soon as possible.

    Tel: +8618018036652

    Email: sales6@ascent-chem.com

    Inquiry

    Get Free Quote of LG Chem, Ltd

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    A Closer Look at Acrylonitrile-Styrene-Acrylate (ASA) NP05 From the Manufacturer’s Perspective

    Why Manufacturers Continue to Advance ASA NP05

    For years on the factory line, you find out which plastics can take a beating from sunlight, temperature swings, rain, and the daily grind—and which ones quietly fade or become brittle. ASA NP05 developed out of the need to deliver something better than ABS for outdoor parts that have no room for compromise. Our job in this field is about more than just blending three base monomers. We refine how elastomer and graft levels come together, and we watch what happens on a molecular scale under stress. The core difference between ASA and other similar plastics lies in resisting weathering and yellowing—something every outdoor part purchaser wants, but that not every material reliably provides.

    Those of us pulling compounds in-house see where formulations succeed and where they stumble. Too many outdoor plastics signal early trouble: colors wash out, surface gloss fades, or parts warp as seasons change. We learned that UV stabilizers alone won’t always cut it if the base resin breaks down under years of sun, smog, and rain. That’s where ASA NP05 steps in as a toughened, weatherable resin you can mold into complex shapes for real-world use.

    Customers approach us because they’ve had failures in door trims, automotive mirror housings, garden tool handles, or outdoor cabinet shells. Most cite color fading and surface chalking as the main gripes. Working at the source, we bring every batch of ASA NP05 through accelerated weathering and color-retention tests before it hits your line. It doesn’t stop at testing: we take real market feedback—returned parts, finish complaints, impact test results—and fold that into the next lot’s compounding.

    Understanding ASA NP05’s Key Differences

    ASA blends three monomer building blocks in a precise ratio, but what sets NP05 apart is how the acrylate rubber grafting amplifies long-term mechanical and optical performance. We don’t just accept tabulated strengths at laboratory scales; we see how NP05 resists surface erosion long after other resins chalk or crack. Years ago, we pushed our pilot runs outdoors alongside ABS and PMMA coupons. After a year, the difference leaped out to the naked eye. ASA NP05 shrugged off fading, retained its gloss, and kept color integrity—not only on white panels but even on deep reds and blues that are notorious for shifting.

    It’s not just about color and gloss. Impact retention matters too, especially where fittings or enclosures take years of thermal cycling. ASA NP05 keeps ductility far better than standard ABS in repeat freeze/thaw or heat/humidity cycles. Unlike some earlier ASA types that struggled with easy flow in multi-cavity or thin-wall molds, NP05 came out of continuous work with end-users in electrical, automotive, and outdoor furniture manufacturing. The aim: dial-in flow performance so you get crisp edges and reliable filling, even in tricky geometries.

    Model, Specifications, and Real-World Behavior

    Manufacturers obsess over repeatable results. It helps nobody if a resin acts differently every time a lot number changes. So NP05’s melt flow rate is held within a narrow band for high productivity on injection molding lines. Most NP05 products land in the mid-range of melt flows, ensuring good detail capture without risking fiber orientation issues in reinforced grades.

    We keep moisture absorption and retained impact strength at the top of our minds during compounding and qualification. NP05 consistently shows Vicat softening points upwards of 100°C, staking out thermal limits above many commodity plastics. This gives more freedom in automotive or equipment covers, which sometimes see direct sun or engine-adjacent use. Molded ASA NP05 holds tight tolerances even after long outdoor exposure or intermittent heating, avoiding warps and deformations that invite complaints and rework.

    On the line, operators appreciate ASA NP05 for its balance: it doesn’t gum up runners with excessive stringing, and demolding is straightforward with proper setup. By sticking to strict particle size grading and resin purity, batch-to-batch color shifts become rare. For processors, it’s about minimizing downtime, whether you run big-lot mods or smaller custom orders.

    Some resins like ABS can be tough to paint or plate for specialty uses, but ASA NP05 opens finishing options. We have customers running vacuum metallization and clear coatings for high-gloss, luxury automotive trim. Surface finishes come out uniform, and primer/paint adhesion stays predictable—another plus for anyone building brand identity into molded color or finish.

    Practical Uses Driving ASA NP05 Development

    Our technical teams trial multiple grades on site when customers send us demanding specs. Outdoor electrical enclosures, solar panel mounts, commercial furniture, and recreational vehicle body panels show where other plastics just cannot handle constant exposure. We didn’t design NP05 for the lab; it was built to stand up in the kinds of real-world environments that turn lesser polymers into brittle, faded relics after a few seasons.

    Furniture engineers favor NP05 because screw bosses, snap-fits, and hinges hold their shape even after thousands of open-close cycles. Garden tool makers draw on NP05’s weatherability to keep handles looking sharp and feeling solid through years of UV, mud, and washdowns. We see boatbuilders buying NP05 for hardware housings that deal with salt spray and collisions, where both gloss and toughness matter.

    Inside automotive factories, trim designers value NP05 for minimizing squeak and rattle. Its low coefficient of friction and dimensional stability mean dash bezels and pillar covers won’t crack or lose their grip, even with sun-heated expansion and cold-morning shrinkage. NP05 supports both unpainted texture molds—and for those aiming at luxury lines, painted or vacuum-metallized finishes that hold premium appeal.

    Comparisons with ABS, PMMA, and Other Materials

    Years of service in outdoor part production hammer home that ABS, though inexpensive, hits a hard ceiling with UV and water exposure. Our tests—held in local outdoor racks as well as in longer accelerated cycles—show color loss and surface roughening set in early. PMMA resists weather but cracks on impact and rejects the sort of tough, detailed design features automotive and hardware makers demand. ASA NP05, built off consistent acrylate grafting, threads the needle between toughness and weather resistance.

    Our engineers spend substantial time helping customers swap out ABS for ASA NP05. Color matching and process tweaks need attention—swapping isn’t a plug-and-play move. Extensive internal and third-party test data reinforce what field experience tells us: NP05 handles outdoor punishment that would chalk and craze standard ABS. At the same time, NP05 avoids the impact brittleness that limits PMMA, and it runs cleaner in molds than many polycarbonate blends, thanks to lower required processing temps and sharply reduced outgassing.

    With climate patterns shifting and global regions pushing new durability standards, cost per life-cycle, not just price per kilo, leads material selection. If a cabinet, trim, or enclosure needs to keep its good looks and toughness after five to ten years without repairs, the up-front bump in material price pays back with fewer service calls and less customer dissatisfaction.

    Toward a Reliable Supply and Transparent Process

    Running polymerization and compounding on site demands a careful eye for workflow: lot consistency, feedstock purity, and process controls affect the final product’s reliability. Manufacturing ASA NP05 in-house gives us a tighter handle on quality than relying on bulk external blends or reseller-market material. We calibrate our extruders and reactors to handle subtle shifts in feedstock properties, sampling every run for melt flow, color, density, and contaminants. All this comes from the real-world realization: an outdoor panel or automotive housing can only be as good as the weakest part of the batch it was molded from.

    Maintaining relationships with pigment suppliers, anti-UV additive partners, and quality control technicians keeps the supply line lean while meeting strict requirements for both performance and repeatability. The technical staff documents every compounding adjustment and correlates weathering exposure data to real output changes. By reviewing customer warranty returns and product audit data, our team can quickly flag problems—fine-tune a formulation, adjust a pigment load, or re-calibrate an extruder. That responsiveness plays out in fewer part failures and tighter color match from batch to batch, not just on the spec sheet but in fielded parts.

    Questions sometimes arise about batch origins, whether lots picked up from a distributor carry the properties promised on paper. Our assurance rests on in-plant quality tracking, not paper certificates alone. From raw feedstock acceptance to pellet shipment, we run each lot through melt flow, tensile strength, Charpy and Izod impact, and xenon-arc weather testing. Line workers train to spot issues early, whether it’s a color drift, surface pitting, or a change in granule dispersion.

    Manufacturing Challenges and Solutions

    No resin is immune to processing challenges: the difference comes down to how the manufacturer addresses them. NP05 can show variation in flow or surface finish if drying steps aren’t right or if excessive regrind is blended in. We found early on that in-line moisture analysis and tight regrind controls sharply cut down on splay or poor gloss. On customer lines, we visit during critical molds runs to help troubleshoot issues and recommend settings—not leaving teams to guess at cause.

    Competing products sometimes claim “weatherability” without clarifying batch-to-batch color or impact consistency. We don’t just rely on additive load—our focus stays on controlling the entire compound, from impact modifier quality to pigment dispersion and polymer matrix structure. NP05’s predictable behavior in injection equipment, from large multi-cavity automotive tools to compact molders running short cycles, underpins our customers' trust in their finished goods. These aren’t abstract promises. They are direct responses to problems reported from the line and fixed in the formulation.

    Feedback loops with tooling engineers and compounders matter more than brochures or tables. Sometimes, even a slight drift in pigment or resin lot can show up months later as a color mismatch. Keeping track of those small signals—adjusting the process quickly, not after the fact—locks in the reliability that outdoor goods and demanding auto trims demand.

    Trends Shaping ASA NP05’s Future in Manufacturing

    Application trends don’t stand still. Demand for outdoor displays, enclosure shells, vehicle trim, and residential/industrial fixtures that keep their looks under stress pushes us to find new pigments, tougheners, and processing tweaks. Strict environmental and safety standards in markets from North America to Asia-Pacific set higher bars for weathering, flame, and chemical resistance. As manufacturers, we welcome those targets: every new challenge pushes NP05’s design and testing forward.

    Consumers and OEMs expect materials to last longer with less maintenance. ASA NP05’s design grows out of constant dialogue with downstream users. As just one sharp example, a few years back, regional weathering cycles changed—summers got hotter, UV levels climbed, and storm intensity picked up. Customers reported more cracking and gloss loss in formerly “acceptable” enclosures. Our team changed stabilizer packages, refined compounding temperatures, and modified pigment chemistry. After lab and in-use runs, results came back in higher color retention and fewer warranty claims—proof that a living dialogue with the supply chain replaces guesswork with documented improvement.

    Transparency increasingly matters not just for specs, but for sustainability. We keep a line open with recyclers and investigate new routes for take-back and reprocessing scrap. ASA NP05 shows reliable behavior not only in virgin form, but also with controlled percentages of reprocessed content—something that answers regulatory and brand-owner pressure for greener supply chains.

    Supporting Technical and Design Teams on the Floor

    Tooling and plant engineers want more than a bag of resin. They want trustworthy data, coaching on process setups, and straight answers when something does not act as expected in the mold. Our site technicians and technical sales engineers visit customer operations, not just to sell, but to troubleshoot cycle times, drying routines, and post-molding finish steps.

    One shop needed help resolving fine texturing on large garden equipment shells. ASA NP05 showed micro-surface variations under certain mold temperatures and humidity swings. Our compounders worked through drying and tool temperature tweaks to smooth out results—cutting down on rejects and post-mold buffing. Stories like this play out every week, as engineers relay tool performance, post-mold handling, or downstream assembly quirks. We treat those calls as feedback, fueling the next NP05 batch improvement.

    Designers leveraging ASA NP05 highlight its flexibility: color choices run wide without falling into unpredictable color drift. Molded-in color stands up through field use, so secondary painting and finishes become options, not band-aids for resin flaws. NP05 grants a measure of creative license without running into the rapid aging or cracking that limits many commodity plastics to indoor-only use.

    Lessons Learned and Continual Improvement

    Working directly with raw resins, pigment dispersions, and extrusion lines for years, our production teams record and act on minor line hiccups. If dust or poorly mixed pigment causes surface “fisheyes” or speckling, the answer lies in upstream process, not just quality rework. Each failure on the line—be it a splayed handle, an off-color batch, or brittle snap-fit—feeds back into compounding tweaks and tighter process controls.

    Our test yards and in-field samples offer more than numbers; they bring the long-term performance of NP05 into view across seasons. Watching how outdoor fixtures hold up on sun-blasted walls or in high-humidity settings gives us the feedback loop to anticipate—and stay ahead of—market demands. As regulatory, design, and consumer pressures evolve, so does ASA NP05.

    Years of manufacture teach one lesson above all: success comes not from marketing claims, but from what shows up in the field, year after year. Each batch, every improvement, reflects more than lab data; it echoes the hands-on experience of compounders, toolmakers, and finishers all working toward tougher, better-looking, lower-maintenance goods for customers worldwide.