| HS Code | 991812 |
| Chemical Name | Acrylonitrile-Styrene-Acrylate |
| Grade | F94484 |
| Density | 1.07 g/cm³ |
| Melt Flow Rate | 16 g/10 min (230°C/3.8kg) |
| Tensile Strength | 48 MPa |
| Elongation At Break | 20% |
| Flexural Modulus | 2100 MPa |
| Izod Notched Impact Strength | 85 J/m |
| Heat Deflection Temperature | 92°C (0.45 MPa) |
| Vicat Softening Point | 100°C |
| Water Absorption | 0.2% (24h, 23°C) |
| Color | Natural/Customizable |
As an accredited Acrylonitrile-Styrene-Acrylate (ASA) F94484 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | ASA F94484 is packaged in 25 kg multi-layered, moisture-resistant bags, labeled with product name, lot number, and safety information. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL) for Acrylonitrile-Styrene-Acrylate (ASA) F94484: 16–18 metric tons, packed in 25kg bags, securely palletized. |
| Shipping | Acrylonitrile-Styrene-Acrylate (ASA) F94484 is shipped in sealed, moisture-proof packaging to protect against contamination and degradation. Standard shipping is by palletized drums or bags, with labeling according to chemical and safety regulations. Store and transport in a cool, dry place, away from direct sunlight and incompatible substances. |
| Storage | Acrylonitrile-Styrene-Acrylate (ASA) F94484 should be stored in a cool, dry, and well-ventilated area, away from direct sunlight, ignition sources, and incompatible materials such as strong oxidizers. Keep containers tightly closed and clearly labeled. Avoid excessive heat and moisture to maintain material integrity. Use appropriate personal protective equipment during handling to minimize exposure risks. |
| Shelf Life | Acrylonitrile-Styrene-Acrylate (ASA) F94484 has a recommended shelf life of 24 months when stored in original, unopened packaging. |
As a dedicated manufacturer of specialty polymers, we supply ASA F94484 for high-performance exterior and technical plastic applications where weatherability, color retention, and impact resistance are critical. Our production supports a range of industries that demand precise formulation, controlled processing, and end-use reliability from their raw materials. Below are the most common, real-world application sectors for F94484 implemented by industrial clients worldwide.
Automotive manufacturers rely on ASA F94484 for exterior parts exposed to prolonged UV, thermal cycling, and environmental stress. With its resistance to fading, chalking, and brittleness, ASA integrates directly into processes for body parts requiring dimensional accuracy and consistent finish. The material supports high-gloss as well as textured surface finishes, making it suitable for new and aftermarket vehicle parts where compliance with OEM quality specifications is required.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
The electrical and power equipment industry specifies ASA F94484 for outdoor junction boxes, meter enclosures, and housings for smart grid infrastructure where exposure to direct sunlight, humidity, and temperature fluctuation can compromise insulating properties and mechanical integrity. The polymer enables production cycles that ensure tight tolerances and long-term UV stability in safety-critical components.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Building material manufacturers introduce ASA F94484 as a primary layer for co-extruded exterior profiles where weather stability and colorfastness are essential. Its ability to withstand long-term UV exposure and acid rain enables facade elements to maintain appearance and strength without the need for repainting or surface treatments. ASA supports high-throughput line speeds, minimizing production downtime compared to traditional materials.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Manufacturers of high-durability recreational equipment use ASA F94484 to address fading and cracking of shells and covers exposed to sun, salt, and impact. Its use ensures product consistency across color lines while enabling complex part geometries for advanced sporting equipment. Clients in this segment value low-gloss options and specialty finishes for brand differentiation and safety regulation adherence.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
ASA F94484 is specified by manufacturers of greenhouse fittings, irrigation control housings, and agricultural sensor enclosures to combat rapid material aging caused by UV, fertilizer chemicals, and fluctuating field temperatures. These housings must meet strict durability and functional reliability targets, especially when deployed in automated outdoor systems that cannot tolerate maintenance shutdowns.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive Acrylonitrile-Styrene-Acrylate (ASA) F94484 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8618018036652
Email: sales6@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
ASA F94484 sits at an important juncture between demand for mechanical reliability and the realities of mass production. This high-performance thermoplastic draws on our years of hands-on experience in tailoring plastics for outdoor demands. Working with this grade has shown us that designers care about more than short-term cost cutting or ease of molding. They ask for consistent color, weatherability, and a surface that stays appealing after years of sun, rain, and wide seasonal swings. At our facility, delivering ASA F94484 is about more than making pellets and shipping goods. The process is about predicting where products end up—in construction, outdoor equipment, automotive trim— then balancing chemistry and processing so every kilogram holds up to the promise we make.
ASA F94484 is a study in balance—styrene’s impact resistance, acrylonitrile’s chemical toughness, plus the acrylic’s outstanding weatherability. Through rigorous compounding and years watching batches cycle through extrusion and injection lines, certain trends always emerge. The melt flow characteristics, which engineers often express in numbers, translate at the machine as less jamming, smoother mold fills, and fewer rework headaches. Whether a batch heads toward sun-exposed housing panels or automotive mirror shells, the spec isn’t just a number—it’s the difference between surface crazing after a harsh winter and a panel that looks showroom-new.
The combination in F94484 builds on the most valuable properties of classic ASA, with an extra push of surface gloss and UV protection. This grade keeps its impact strength even after lengthy sun exposure, and that means end products last longer, keep their color, and handle rough handling. The Vicat softening point shows why outdoor benches molded from F94484 don’t warp on steamy midsummer days, and why end users don’t complain about fading or powdering after a season outdoors. For applications that rely on snap fits or tight assembly tolerances, ASA F94484’s dimensional stability proves itself batch after batch.
People ask what sets F94484 apart when it’s actually in use. Day-to-day, we see it go top-side in automotive trim, mirror caps, and wiper housings, replacing duller ABS or brittle older plastics. Customers in architectural cladding choose F94484 for its resistance to chalking and fading, which cheaper plastics can’t match. In outdoor signage, where colors and gloss draw eyes even after years on a main street, the advanced UV package in F94484 keeps branding sharp. Electrical enclosure makers who want reliable dielectric properties and temperature stability find that this grade brings fewer warranty claims from the field.
We’ve seen manufacturers with tight turnaround budgets pick ASA grades based on up-front price, only to swap out those grades for F94484 within a year because the real cost comes from returns and replacements. The processing consistency means toolmakers don’t have to keep re-cutting molds to adjust for shrink or poor surface finish. Consistently low defect rates, less downtime, and fewer rejected parts tell the story better than any long-winded discussion of technical data.
Plastics like ABS, PVC, and even regular ASA enter our plant for compounding runs every week. Many projects begin with a customer trying these materials only to run into problems—yellowing, warping, tacky surfaces, or surface cracks after a harsh season in the sun. ASA F94484 tackles these gaps head-on. Its improved acrylic rubber phase disperses UV load more evenly, keeping pigment fade minimal across deep colors and bright whites. ABS, while affordable and easy to process, brings a big trade-off in weather exposure. ABS yellows, embrittles, and in our experience, doesn’t make it past a single winter outdoors before changes show up.
ASA F94484, on the other hand, holds pigment integrity and gloss for years. Even in high-altitude conditions, where UV radiation proves punishing, F94484’s parts come back in warranty inspections looking much better than rival materials. This performance doesn’t depend on adding expensive coatings after molding—it’s built into the compound from the start.
Compared to PVC, ASA F94484 skips issues with chalking, shrinkage, and heat distortion. It does not off-gas the same way as chlorinated plastics and meets higher cleanroom standards for electronics housing. PVC can’t offer the same tactile smoothness or maintain color under both frost and heat, which F94484 customers report as a key area. With polycarbonate blends, manufacturers often run into high material costs, processing difficulties, and post-processing demands that slow down production. F94484 manages a balance of rigidity and resilience so processors can get sharp mold details without risking brittleness.
Every resin grade makes certain promises, but only regular production exposes the true picture. With F94484, our experience shows better flow and cavity filling on multi-cavity injection molds, resulting in lower scrap and more consistent part weights. Many customers report reduced mold sticking and a decrease in “blush” marks around gates, which matters for visible end-use parts. We’ve witnessed that F94484 tolerates regrind without major loss of surface or color quality, allowing processors with sustainability concerns to reduce virgin polymer input.
On extrusion lines, where speed and surface finish drive profits, this material shows fewer die-line marks and typically needs little post-extrusion buffing. It stands up to aggressive shaping and cutting, holding edge integrity on profiles like window trim or fencing. ASA F94484’s process window enables quick color changes and fast cleaning between runs, lending flexibility for facilities with mixed product lists.
A lot gets said about the environmental impact of plastics. Looking at our own footprint, it’s clear that what matters is extending product life, minimizing need for mid-life coating or recoloring, and making room for reprocessing waste. F94484, thanks to its surface and UV characteristics, cuts down on recoating and replacement cycles. Over time, that saves raw material. It also substantially reduces labor, logistics, and landfill pressure from product solutions that fail too soon. Our line trials show that F94484 regrind can constitute up to a quarter of certain molded products with nearly indistinguishable visual or mechanical differences. Those advantages matter as more of our customers demand full traceability on material usage and recycling potential.
The quality teams reviewing warranty claims and consumer complaints see the value of this ASA every year. Parts coming back from harsh outdoor exposure almost always show less yellowing or chalking than products made from conventional plastics. For a lot of customers, the longer period before visible degradation translates directly to a stronger brand image and less fieldwork. Architects and builders ask for product certifications based on past performance, and we are seeing more specifications that call out F94484 by name. Custom color matching, often a pain point with high-gloss plastics, works more reliably in our experience with this grade. The pigmentation disperses evenly, so matching new production batches to existing installation becomes faster.
Consumer product manufacturers in gardening, sports, and outdoor furniture who run both private-label and branded lines often share that failure rates tied to environmental degradation drop by more than half when moving to ASA F94484. Similarly, automotive clients value the grade’s scratch resistance and color hold on mirror shells and pillar covers—areas constantly exposed to sun, road salts, and physical abrasion. These aren’t numbers coming from marketing, they are part recalls we don’t see, customer complaints that don’t materialize, and references we get from firms who tried cost-cutting with lesser grades.
No material solves every processing or end-use challenge. F94484 runs best on equipment with tight temperature controls, as overheating can diminish surface quality. In facilities without shot weight monitoring and careful drying practices, surface spots or flow lines may appear. Early users sometimes report tuning their molding parameters for weeks to get the full benefit, especially when switching from lower-quality ASA or ABS sources. The learning curve pays off, and our own operators routinely train customers on how to squeeze the best detail and gloss from this resin.
One recurring request remains the ability to produce ultra-matte finishes without secondary coatings. The current strengths of F94484 lie in gloss and color hold; applications demanding deep matte surfaces require adjustments in mold texturing. High-shear processing environments, such as profile extrusion at increased speeds, may introduce some surface swirling if cooling practices slip. We have found that maintaining optimal water bath temperatures and providing adequate air flow over extruded profiles prevents most visible surface artifacts, ensuring finished goods retain their crisp appearance.
Since putting F94484 into volume production, every test run and field report shapes our approach to formulation. Architects, builders, and automotive buyers continue to push for longer color life, improved chemical resistance for cleaning protocols, and reduced gloss in some applications. Each feedback cycle brings us closer to balancing UV stability and cost, as we work directly with pigment suppliers and additive manufacturers to further anchor color during long sun exposure.
Some industries, such as electrical equipment housing, ask for greater anti-static or flame-retardant characteristics without loss in weatherability. Studies and in-plant experiments focus on tuning additive packages so that the next generation of F94484 will expand into even more demanding technical spaces. Our technical team runs batch comparisons under real-world exposures—sidewalk salt, persistent bird droppings, and hot humid air—so that when someone asks how F94484 stacks up, we have more than lab charts to show.
Product stewardship doesn’t end as soon as material leaves our plant. Customers in Europe and North America often bring up compliance with standards for exterior automotive and building materials. F94484 meets RoHS, ELV, and REACH requirements, tracing every compound batch with a defined chain of custody. In practical terms, these certifications mean manufacturers can ship finished goods internationally without running into unanticipated regulatory issues. Transparency in additives and colorants allows for smoother regulatory submissions and fewer surprises during third-party audits.
With new laws on microplastics and emissions coming into play, reducing surface degradation matters more than ever. F94484, designed with low-chalking and less microcracking, means far less particulate release into air or water streams. As material suppliers, watching these trends means we anticipate not just the next batch but the next decade of environmental expectations. Informing our customers of lifecycle impacts, recyclability, and certification keeps their products safe from recalls and aligns our work with incoming legal frameworks.
Every kilogram of ASA F94484 represents years of process optimization, chemical balance, and direct feedback from dozens of sectors—automotive, outdoor living, construction, and signage among them. Our investment in color matching, UV resistance, and surface protection came from repeated cycles of field failures, warranty returns, and demanding design challenges. Teams in quality control and production engineering push daily to tweak resin characteristics within a narrow spec, so every bag maintains the blend integrity our buyers have come to recognize.
As manufacturers, we measure success not in how many tons we ship, but in finding out months and years later that clients kept their brand promise to their own customers. Seeing architects call for F94484 as a named requirement on major developments, or automotive suppliers write us directly after years of zero field failures, proves the value of putting experience and genuine material science above cost shortcuts. From our plant floor right up to your project site, ASA F94484 stands not as a commodity, but as the result of long-haul partnership, feedback, and technical improvement.
With the global push toward sustainable production, product lifecycles, and materials that do not fade in the sun, ASA F94484 keeps giving designers and manufacturers tools to make outdoor products and automotive components that truly last. As we keep producing and supporting this grade, our focus stays rooted in honest dialogue—working through production issues, sharing best practices, and taking every customer success story back into our process. Behind every shipment, there’s a story of real factory workers, engineers, and partnerships helping bring the promise of high-end ASA to life, batch after batch, season after season.