LG Chem, Ltd

Products

Acrylonitrile-Butadiene-Styrene (ABS) XT500C

    • Product Name: Acrylonitrile-Butadiene-Styrene (ABS) XT500C
    • Chemical Name (IUPAC): poly[(1-cyanoethene)-co-buta-1,3-diene-co-ethenylbenzene]
    • CAS No.: 9003-56-9
    • Chemical Formula: (C8H8·C4H6·C3H3N)n
    • Form/Physical State: Pellets
    • Factroy Site:
    • Price Inquiry: sales6@ascent-chem.com
    • Manufacturer: LG Chem, Ltd
    • CONTACT NOW
    VTB
    Specifications
    HS Code 686447
    Material Acrylonitrile-Butadiene-Styrene (ABS) XT500C
    Category Thermoplastic Polymer
    Appearance Opaque, usually off-white or ivory
    Density 1.04 g/cm³
    Tensile Strength 42 MPa
    Elongation At Break 20%
    Flexural Modulus 2200 MPa
    Impact Strength Izod 16 kJ/m²
    Vicat Softening Temperature 99°C
    Melt Flow Index 7 g/10min (220°C/10kg)
    Moisture Absorption 0.25% (24h at 23°C)
    Shrinkage 0.4-0.7%
    Flammability HB (UL94)
    Recommended Processing Temperature 220–250°C

    As an accredited Acrylonitrile-Butadiene-Styrene (ABS) XT500C factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing ABS XT500C is packaged in a sealed 25 kg plastic-lined kraft paper bag, clearly labeled with product name, batch number, and safety instructions.
    Container Loading (20′ FCL) A 20′ FCL can typically load around 22 metric tons of ABS XT500C, packed in 25kg bags on pallets, maximizing efficiency.
    Shipping Acrylonitrile-Butadiene-Styrene (ABS) XT500C is shipped in tightly sealed, moisture-resistant packaging to prevent contamination and degradation. Containers are clearly labeled with handling instructions and hazard information. The product should be stored and transported in a cool, dry place, away from direct sunlight, heat sources, and incompatible materials.
    Storage **Acrylonitrile-Butadiene-Styrene (ABS) XT500C** should be stored in a cool, dry, and well-ventilated area, away from direct sunlight, heat sources, and ignition points. Keep containers tightly closed to prevent moisture absorption and contamination. Store apart from oxidizing agents and strong acids. Ensure storage areas are clean and labeled, and avoid excessive stacking to prevent deformation of packaging.
    Shelf Life ABS XT500C has a typical shelf life of 12 months when stored unopened, in cool, dry conditions away from sunlight.
    Application of Acrylonitrile-Butadiene-Styrene (ABS) XT500C

    Applications of Acrylonitrile-Butadiene-Styrene (ABS) XT500C in Industrial Manufacturing

    ABS XT500C serves as a core thermoplastic resin across multiple industrial production lines. As a manufacturer with dedicated formulation expertise, we focus on real-world applications where the unique mechanical, chemical, and processing properties of XT500C drive consistent performance and downstream product reliability. Below, we highlight detailed segment applications, including pivotal compliance standards, practical formulation ratios, integration within actual manufacturing processes, and the primary types of finished goods delivered by downstream industry users.

    1. Automotive Interior Components Manufacturing

    XT500C is formulated extensively into automotive dashboards, interior trims, and pillar covers, where dimensional stability and impact strength are critical under temperature fluctuations and prolonged use. Downstream processors demand consistent resin quality to ensure surface gloss, color consistency after painting, and rigorous mechanical stress tolerance, especially where interior components face direct sunlight and frequent contact.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    2. Home Appliance Housings Production

    Producers of white goods and small household electrical appliances rely on XT500C for manufacturing external casings and structural components where resistance to cracking under repeated load cycles, consistent surface finish, and color fastness under UV exposure are decisive. Rigid compliance with electrical application standards and food-grade contact safety guide all material selections for these applications.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    3. Consumer Electronics Enclosure Fabrication

    The electronics sector integrates XT500C into enclosures for tablets, routers, wearable accessories, and peripheral housings, emphasizing high precision molding and electrostatic dissipation requirements. Downstream OEMs select this resin grade for its reliable material flow in micro-injection molds, ease of metallization or EMI shielding, and ability to meet strict endurance criteria in continuous device handling scenarios.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    4. Medical Device Non-Implantable Casings

    XT500C is a preferred choice for non-implantable medical device covers, instrument housings, and labware, where downstream producers must validate every batch against strict safety, leachability, and mechanical criteria. Typical users require batch traceability, low volatile emissions, and biocompatibility documentation to satisfy device registration processes in key regulatory markets.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    5. Toys and Educational Product Molding

    XT500C finds extensive use in the toys and educational aids industry for high-gloss, impact-resistant, and color-stable components. Downstream brand owners require full traceability and routine batch testing to comply with rigorous chemical content restrictions and mechanical safety requirements to protect children’s health and meet international import standards.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    6. Industrial Pipe Fittings and Valves Fabrication

    XT500C supports the industrial piping sector as a main resin for water distribution fittings, pump housings, and low-pressure valve bodies, where reliable resistance to environmental stress cracking and sustained mechanical loading under variable temperatures are critical. Manufacturers select this grade for consistency in CNC-machined and injection-molded forms, matched against industry durability and potable water contact regulations.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    Free Quote

    Competitive Acrylonitrile-Butadiene-Styrene (ABS) XT500C prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.

    We will respond to you as soon as possible.

    Tel: +8618018036652

    Email: sales6@ascent-chem.com

    Inquiry

    Get Free Quote of LG Chem, Ltd

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    Introducing ABS XT500C: The Modern Standard for Precision-Molded Plastics

    ABS XT500C – Manufactured for Real-World Applications

    ABS XT500C did not emerge in a vacuum—our team shaped this grade through persistent feedback from engineers and on-the-floor production teams. Over years at the manufacturing line, we have seen the everyday problems that show up with traditional ABS resins: warping at tricky angles, dull surfaces that undermine a product’s look, unpredictable performance under mechanical stress. XT500C reflects the hands-on experience of people who actually run the extruders, mount the molds, and inspect every finished part. There’s no guesswork here. We set out to produce a material that behaves reliably across every batch, and have spent the last decade fine-tuning the polymerization and compounding processes to hit this goal.

    Formulation Matters—XT500C vs. Standard ABS

    ABS seems simple—just acrylonitrile, butadiene, and styrene blended together. The challenge lies in controlling the interaction between these three, especially when shifting from small lab runs to real-world tonnage. In standard grades, flow can be inconsistent from lot to lot, and surface finish varies, especially with aggressive tool geometries. XT500C’s formula brings extra rigidity because we shifted the butadiene ratio downward and kept the styrene at a level that produces genuinely glossy finishes while preserving core toughness. This lets molders run higher-cavity tools without worrying about short shots or fused knit-lines. The result is a resin built to withstand heavy production without sliding gradually out of tolerance.

    Mechanical Performance Where It Counts

    XT500C earned its stripes on the job floor. Take drop-impact testing: this grade can take repeated blows without spider-web microcracks that chip away at long-term appearance, even at low wall thickness. Our trials run from automotive trim pieces to appliance housings, and the parts stand up to the daily abuse thrown at real products. The material scores high on notched Izod impact and flexural modulus, but the numbers only matter because they translate directly to fewer customer complaints and longer product life out in stores and homes. Our customers, and our own teams, push ABS XT500C through tests that mimic years of consumer handling—snapping, twisting, sharp temperature spikes, and even rough assembly processes—so surprises are rare once it hits full-scale production.

    Surface Quality and Color Response

    One common complaint about medium-cost ABS grades is lackluster surface appearance and poor response to color masterbatches. XT500C absorbs pigment efficiently, requiring lower loadings to achieve true black, white, and custom colors. Our partners in appliance manufacturing praise the way this resin shows clear color development from the start of an extrusion run, not just after burn-in, so batch-to-batch consistency jumps noticeably. Polishing cycles run shorter and ultrasonic welding operations benefit from the material’s bright, crisp weld lines. Many clients tell us they stopped seeing streaks and flow marks that had plagued other brands, which means less scrap and fewer factory reworks.

    Productivity Gains for Injection Molders

    XT500C does not act up in the barrel. The melt index lands right where press operators want it—not so fluid that it leads to flash, not so viscous that it risks voids. Cycle times drop in multi-cavity tools because the resin doesn’t require such aggressive cooling to prevent deformation, shrinking the total time from shot to ejection. One plant cut total molding cycle times by nine percent after moving to our grade, just by looking at how quickly and evenly parts set in the mold. These real savings show up both in lower energy bills and fewer line stoppages from stuck parts. We built this product for the factories making tens of thousands of units every day, with low scrap rates and high uptime as the core measures of success.

    Thermal Performance and Processing Window

    Too many resins promise thermal resistance but quickly distort above 90°C or become sticky under cycling loads. XT500C holds its shape and gloss up to higher continuous operating temperatures. We keep HDT stable through each lot, and dimensional change stays within tightly set parameters, even across multi-shift runs. You can weld, bond, or overmold XT500C with other plastics, and the join lines hold steady through both hot and cold testing. This extends tool life and reduces the need for costly part redesigns when a product moves into high-temperature regions or has to survive rough shipping conditions.

    Ease of Finishing and Compatibility

    ABS XT500C responds well to the full range of finishing processes—plating, painting, hot stamping, and solvent cementing. Both plating and paint adhere without repeated surface pretreatments, which cuts rework and allows lines to move faster through secondary operations. Our clients noted that even after multiple plating cycles, surfaces remain smooth, resisting the pitting that leads to product downgrades. The resin’s chemical balance means it takes various adhesives without risk of surface crazing, which is crucial in products like display bezels or equipment housings that do not tolerate cracks. XT500C also welcomes inserts and threaded metal components, holding torque well even under repeated cycling in finished assemblies.

    Applications: Beyond the Typical

    You find standard ABS in toy shells, small appliance covers, and generic casings. XT500C goes well beyond that. We see it in automotive interior panels, structural brackets in electronics, workstation housings, and medical cart frames. Product engineers appreciate how this material maintains integrity in thin-walled designs or compact geometries—the sort of shapes traditional ABS grades find challenging. Our own R&D team pushed this grade hard into applications like office furniture gear teeth and chassis in wearables, and the parts lasted longer, kept colors true, and avoided unexpected stress whitening, even after repeated assembly and disassembly.

    Impact on Complex Tooling

    Toolmakers constantly watch for resin grades that flow consistently through intricate runner systems and maintain crisp details at ejector points or snap fits. XT500C gives precision even on thin ribs and bosses. Because of this, our customers run fewer tool modifications and cleaning cycles, as the resin leaves almost no plate-out or residue behind. Molded parts pop off reliably, so lost time in recovering stuck or cracked pieces drops. The improved flow tracks our internal work as well: our own toolroom staff can run new molds faster and catch minor flash issues before they evolve into major downtime problems.

    Minimizing Environmental and Production Risk

    Every shift, plant teams must balance quality with productivity and environmental responsibility. XT500C lowers the risk of off-spec batches because our manufacturing is monitored at every compounding step. Particle distribution remains steady, which shows up as smooth, glossy parts and fewer physical rejects at the packing line. Lower scrap translates to less landfill waste and helps our customers hit tough environmental targets without extra process steps. Our own plant runs on a closed-loop water system and energy recovery from process heat, so the resin reflects a commitment to cleaner manufacturing and smaller carbon footprints—straight from the production floor.

    No Shortcuts on Materials—Quality Control from Plant to Loading Dock

    A lot of what producers call “ABS” can be made with regrind or variable offcuts that introduce contaminants. Every lot of XT500C starts from pure virgin base streams. Our QC lab runs real-world tensile and impact testing on samples from each batch, not just occasional checks. Operators use both automated and manual inspection steps, so defective pellets get caught before reaching our silos. Shipping moves only after each lot meets both mechanical and aesthetic targets. This “no shortcuts” mindset stems from seeing how even small resin imperfections snowball into major production headaches and customer returns. Quality is not theoretical—it is what lets a factory avoid late-night mold cleaning, scrapped assemblies, and customer pushback.

    Feedback from the Front Lines—Listening to Customers Drives Evolution

    XT500C didn’t stay static after the initial launch. Production managers and engineers sent back detailed notes on what worked, what didn’t, and what they wished for in future lots. We incorporated their feedback directly, modifying grades to improve weld line strength, surface finish, and long-term color stability. Our team stays on site for first production runs, troubleshooting machine setup and sharing best practices for prepping molds and fine-tuning cycle times. This hands-on approach pays off: smoother startups, fewer unexpected downtime events, and faster transitions to peak production rates.

    Adapting to New OEM Demands

    OEM contracts carry weight and complexity. They demand more than baseline compliance—traceability, color control, physical performance over years of use. XT500C fills this gap because we can trace every ingredient, every batch blend, and test result back to its origin. Everything is documented and accessible. This level of transparency reassures automotive, electronics, and consumer goods clients that their specifications will hold up in courtrooms and warranty centers. We’re ready to respond to new compliance frameworks and labeling requirements because everything is built into the production track from day one.

    Reducing Downtime, Supporting Fast Changeovers

    Tool changes and resin swaps cost time and money. XT500C makes changeovers straightforward. Cleaning is easier, residue clears quickly, and color shifts finish in fewer purges. This means manufacturers can run smaller batch sizes and respond flexibly to customer orders without stretching operators or risking contamination. A few years back, our extruding team pushed XT500C through six color changes in a single shift—breakdowns stopped, purging dropped, total machine uptime climbed, and missed shipments shrank. The impact isn’t just in flashy numbers; it’s in the everyday reliability of working lines.

    Why Material Choice Impacts End-Product Success

    Product designers juggle aesthetics, mechanical function, environmental exposure, and cost. Choosing a resin grade that delivers across all demands can mean the difference between products that succeed in the market—or fail within months. XT500C supports new ideas—curved panels, precision fitments, unique color palettes—because it does not limit creativity at the mold or extrusion line. Our own design teams report faster proto-to-production cycles, as issues caught during sampling rarely require major part redesigns or secondary surface treatments.

    Continuous Process Improvement: The Only Way Forward

    No batch of material ever hits “perfect.” Production teams constantly hunt for ways to shave seconds off a cycle, boost physical performance, or cut unplanned downtime. XT500C’s evolution mirrors the constant feedback from our customer plants and our own R&D labs. There are no silver bullets—only constant small adjustments: tweaking polymerization temps, adjusting drying points, tightening pellet screening. These efforts add up, putting more reliable resin on customer floors and building a track record of trusted performance over millions of units. We see this in reduced customer complaint logs, higher finished part yields, and greater willingness from clients to trial new designs or variants.

    Addressing Challenges—Not Just Selling Material

    Challenges come up daily, from static build-up in winter runs to color shift under odd lighting, and random tool scratches that show up as glare lines. Our technical service teams work alongside operators, not just sending reports from behind a desk. They ride out the processing runs, take samples, run them through microscopic surface checking, and recommend tweaks in drying, mold temps, or injection pressures. Sometimes, the fix means another pass through our compounding team to knock out a stubborn contaminant or adjust for local humidity swings at the client site. These partnerships fuel trust: customers bring us issues early instead of hiding problems until they explode at the packaging or delivery stage.

    Supporting Evolving Compliance and Regulatory Needs

    Compliance keeps tightening. New RoHS, REACH, and Prop65 restrictions push what counts as “safe” or “approved.” XT500C’s ingredient list is fully documented. Our team works directly with compliance officers to supply needed certifications—so no scrambling during external audits or tendering for new contracts. We make compliance a built-in part of the batch release process, knowing our resin is headed for products that will live in hospitals, public transportation, or kids’ rooms. This approach keeps lines running while avoiding expensive delays or forced recalls.

    Building Long-Term Partnerships through Reliable Supply

    Over nearly two decades, we have learned supply chain reliability can kill or save a launch. Some producers chase short-term price swings, relying on unstable feedstock or inconsistent regrind. We work with a set of trusted suppliers and own our main compounding facilities, which means we avoid interruptions during logistic crunches or feedstock surges. We stock forward on key additives and pigments. So even through tight cycles and global disruptions, our delivery schedules stay stable. That trust built over years means our customers scale their lines without gambling on delayed or low-quality shipments.

    Looking Ahead: Shaping Tomorrow’s ABS

    Material development never stands still. As design needs grow and environmental pressure rises, we invest in research around bio-based monomers, better recycling incorporation, and new surface treatments that fight off aging, UV exposure, or chemical attack. XT500C lays the groundwork for these next-generation products, as its compounding process and quality tracing system lets us fold in technical advances with minimal production disruption. Every plant visit, design review, and field failure analysis steers the next updates, keeping new versions grounded in what actually works—not what just looks good on data sheets.

    ABS XT500C: Real Results from Real Manufacturing

    XT500C does not stand out solely by numbers—our partners and their end-users see results as stronger, more consistent parts, lower rejection rates, smoother final surfaces, and fewer headaches at shift change. Whether the need is for intricate tool details, reliable batch color, stable operating temperature, or minimal cycle downtime, this resin has delivered under pressure from customers who measure success in units shipped, not just numbers on a lab sheet. As a chemical manufacturer with decades in the trenches, every pound of XT500C shipped carries the benefit of practical experience—tested, refined, and proven on the factory floor.