| HS Code | 785777 |
| Product Name | Acrylonitrile-Butadiene-Styrene (ABS) XR409H |
| Appearance | Opaque pellets |
| Density | 1.04 g/cm³ |
| Melt Flow Index | 2.5 g/10 min (220°C/10kg) |
| Tensile Strength | 42 MPa |
| Elongation At Break | 30% |
| Flexural Modulus | 2100 MPa |
| Impact Strength Notched Izod | 18 kJ/m² |
| Heat Deflection Temperature | 97°C (at 1.8 MPa) |
| Vicat Softening Point | 104°C |
| Moisture Absorption | 0.3% (24h, 23°C) |
| Color | Natural/White |
As an accredited Acrylonitrile-Butadiene-Styrene (ABS) XR409H factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | ABS XR409H is packaged in 25 kg moisture-resistant, sealed plastic bags, labeled with product name, lot number, and manufacturer details. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL): Acrylonitrile-Butadiene-Styrene (ABS) XR409H can load approximately 16-18 metric tons (MT) per 20-foot container. |
| Shipping | ABS XR409H is shipped in moisture-proof, sealed bags typically weighing 25 kg each. The product should be stored in a cool, dry place, away from direct sunlight and heat sources. During transportation, ensure the packaging remains intact to prevent contamination and maintain product quality. Handle according to safety guidelines. |
| Storage | Acrylonitrile-Butadiene-Styrene (ABS) XR409H should be stored in a cool, dry, and well-ventilated area, away from direct sunlight, heat sources, and ignition sources. Keep the material in tightly closed, labeled containers to prevent contamination and moisture absorption. Avoid exposure to strong acids, bases, and oxidizing agents. Ensure compliance with local regulations and safety guidelines during storage and handling. |
| Shelf Life | ABS XR409H typically has an indefinite shelf life if stored in cool, dry conditions, away from direct sunlight and moisture. |
As the original manufacturer of ABS XR409H, we deliver this material to a wide range of precision-driven industries. Below, we lay out specific application tracks in key manufacturing sectors, detailing the unique regulatory, formulation, processing, and end-product contexts that guide customer adoption of this grade in industrial environments.
Tier 1 and Tier 2 automotive component manufacturers specify ABS XR409H for use in structural and aesthetic parts requiring outstanding impact resistance and superior surface finish. This material enters production for dashboard substrates, center consoles, door trims, and mirror housings, where consistent dimensional stability under variable temperature and humidity is essential for OEM compliance audits and in-vehicle environmental exposure.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Leading producers of white goods and small domestic appliances select ABS XR409H for high-gloss, impact-resistant covers and load-bearing internal supports. This grade meets stringent color, texture, and dimensional requirements in visible parts of refrigerators, washing machines, air conditioners, and countertop appliances, where consumer electronics interfaces and appliance safety intersect.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
OEM and EMS factories for personal electronics utilize ABS XR409H for smartphone battery covers, printer housings, and monitor casings, where aesthetics and in-mold color technology require exact control over flow and shrinkage characteristics. The material functions reliably for thin-walled parts facing drop, flexural, and disassembly stresses during the electronics product lifecycle.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Certified pipe and fitting manufacturers adopt this ABS grade for the production of domestic and industrial drain, waste, and vent (DWV) components, leveraging high flow and mechanical strength standards to ensure leak-free operation under repeated thermal cycling and chemical exposure. Regulatory assurance requirements in this sector challenge material purity, traceability, and batch consistency.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Travel goods manufacturers integrate this ABS grade in luggage shell manufacturing due to its impact resistance, formability, and color stability under UV exposure. The material is thermoformed or injection molded for lightweight, durable shell components where bending, deformation, and frequent load handling occur during the product’s lifecycle from baggage factories to end-user markets.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive Acrylonitrile-Butadiene-Styrene (ABS) XR409H prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8618018036652
Email: sales6@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Working at the manufacturing level, you truly understand the way every detail shapes a product’s future in the market. Acrylonitrile-Butadiene-Styrene — or ABS to most of us — has been a backbone of many industries for decades, but each grade carves out a role of its own. XR409H is our specialized offering, developed over years of plant-floor improvements, process tweaks, raw material selections, and customer feedback sessions. Its aim: to overcome real frustrations people face in processing, appearance, and toughness.
ABS is all about a balance — impact strength, gloss, rigidity, and processability. Our XR409H doesn’t just talk balance, it proves it during compounding and molding. Technicians in molding shops notice fewer hassles with sink marks or weld lines. The resin flows swiftly into tight molds, filling every cavity with consistent density. Parts come out smooth, keeping a glossy look that stands up on a retail shelf or in an engine bay. This didn’t happen by chance — our research department poured time into getting the grain structure right and tuning the polymerization to prevent molecular-level cracking, which often plagues lesser ABS resins.
Years back, molds for consumer electronics demanded resins that wouldn’t let down under tightening cycle times. We dealt with batches warping, leaving operators in a bind. XR409H developed out of our efforts to cut those headaches out. By adjusting the butadiene rubber content and tweaking stabilizers against yellowing, we minimized warping and surface defects, delivering more reliable part dimensions and colors straight out of the mold.
People talk about impact resistance, but it isn’t just a lab value — it’s a real-world test. XR409H handles day-to-day knocks, drops, and handling, whether it’s automotive interiors, durable appliance housings, or sturdy luggage shells. The trick came down to stabilization during polymerization and close monitoring of butadiene dispersion. Instead of brittle corners and cracking under pressure, molded parts from XR409H can take abuse longer without losing finish quality.
We’ve heard from clients convinced all ABS feels the same. After enough troubleshooting calls about flow lines, stress marks, or UV-induced yellowing, you know that’s not true. A trial run comparing XR409H side-by-side with broader-market ABS commonly ends with operators asking why their parts release easier or accept tight tolerances that once seemed out of reach. In the manufacturing world, a small gain in flow or a tiny reduction in moisture absorption saves weeks of rework and line downtime over a year.
Processing techs look for resins that aren’t temperamental. XR409H takes a range of injection parameters, showing a wide melt flow window and strong thermal stability during longer cycles. In our own plants, running XR409H at various nozzle and mold temps displayed less tendency for burn marks or splay, which means fewer rejects and costly shutdowns. Its pellet consistency, refined during extrusion, results in more predictable feeding and dosing, a crucial point in high-speed automated lines. Operators get more control, reducing start-up waste and running more full shifts without interruptions.
Customers in appliance and electronics demand surfaces that aren’t just functional, but look crisp and vibrant every time. Uniform color is a must. Our colorists faced this challenge head-on, scrutinizing every step from pigment mixing to final pelletization. What’s different with XR409H? Fewer color streaks, no clouding, and a clean, glossy surface — not because that’s the marketing pitch, but because we chase tight spectral measurement in every batch. Chalky, uneven, or off-tone surfaces don’t make it through our quality gates, so they won’t show up in your line’s parts.
XR409H slides easily into processes beyond injection — extrusion and thermoforming included. In sheet extrusion, it gives a dependable gauge control and strong balance between stiffness and flexibility, so sheets don’t ripple or deform unpredictably under their own weight. In thermoforming, operators see sharp definition, tight corners, and consistent snap-back, with less breakage in deep draws. One customer, building protective packaging clamshells, swapped from a generic ABS after frequent cracking on folding lines; with XR409H, waste dropped, and form/fit issues faded away.
ABS can get a reputation for being just decorative plastic. Yet in automotive interiors and structural applications, the wrong resin leads to fast failures. XR409H holds up in climates swinging from freezing cold to humid summers. Our engineering crew ran long-term cycling and drop tests on sample panels — panels snapped in half with entry-level ABS, but kept shape with XR409H. This toughness didn’t come easy. It comes from persistent tweaks in monomer ratios and in-line quality monitoring, disciplines our plant teams live by.
Requirements around VOC emissions, halogen-free status, and food contact only grow stricter. XR409H handles most of these demands straight off the pellet, thanks to careful monomer selection and ultra-low residue catalysts. We’ve supplied to brands with tight requirements on offgassing for interior parts and found XR409H comfortably meets established international standards. Plant safety engineers have said the predictable behavior at known temps supports workplace safety initiatives too.
Sometimes a single-resin solution works, but more often, OEM customers want additive packages — UV resistance, antistatic, or flame retardant properties. XR409H blends smoothly with masterbatches, showing stable performance after compounding. Our partners add glass fibers for extra rigidity or blend in colorants without fighting pigment separation or processing gels. Over the years, trials with this grade have shown enhanced compatibility, so physical properties don’t collapse during challenging compound formulations.
ABS can become brittle with high gloss, or lose high impact strength as you increase flow. XR409H bridges that gap. It lets part designers push surface aesthetics while holding on to resilience, saving the need for multiple materials in one product or additional coatings. Shops switching from older grades comment on improved cycle time without added surface defects. Paint adhesion tests on XR409H-coated bezels or buttons gave higher success rates, slashing re-spray costs and boosting overall finish quality.
Design engineers, toolmakers, and purchasers often bring us fresh challenges. Recent projects in tool-less assembly and invisible welds led to subtle changes in the processing stabilizers used in XR409H. Technicians found improved ultrasonic weld consistency. We saw stronger snap fits and better vibration welds, especially with sharp-edged parts on modern appliance designs. Not every resin handles the stresses these assembly methods create, but ongoing collaboration with downstream users keeps us pushing the boundaries.
Today, no manufacturer can ignore environmental impact. XR409H development has shifted to gradually include post-consumer recycled feedstocks, not just because of regulations, but due to increasing customer procurement standards. Current batches feature recycled content without suffering in color shine or mechanical toughness, and continuous trials run in parallel to enhance circularity further. Investments in closed-loop production and pellet reclamation lines support this, not simply as box-ticking, but as genuine cost and emission reducers.
It’s easy to lump all ABS types together, but ongoing shop-floor experience cuts through that illusion. Generic high-impact ABS typically falls short for jobs calling for brilliant finish or tight mechanical specs. XR409H shows higher impact resilience alongside improved surface appearance, which means fewer rejects from visual or mechanical spot checks. By contrast, many flame-retardant or ultra-high-flow ABS grades sacrifice appearance or resilience — XR409H doesn’t force that compromise, giving shops more options in less product diversity.
Cost isn’t just about the resin price, it involves process time, downline scrap, and after-market returns. XR409H, purposely formulated for reliable feeding and stable flow, translates into fewer delays on high-automation lines and slashes downtime from nozzle blockages or inconsistent melt delivery. Feedback from partners shows this often cuts total part cost more than would be achieved by simply hunting lower resin prices. Less rework and less scrap means more net yield at any throughput, and that adds up on a yearly sheet.
We support plants across Asia, Europe, and the Americas. Frequent communication with compounders and molder partners guides every change or improvement. Response teams troubleshoot on-site. For plants with specialized blending or venting needs, our teams provide adjustment protocols built on line trials, not just lab benchwork. XR409H’s consistency under varying environmental conditions reflects the rigor of these location-based audits and process reviews. Every batch undergoes approval both at central and satellite labs, reflecting an understanding of real-world production as opposed to theoretical data.
Field returns and warranty claims hurt manufacturers at every step. XR409H was shaped by that realization. Our failure analysis feedback loop teaches us more than success stories. Insights from humidity exposure tests on white goods, to accelerated UV aging for outdoor items, filtered directly into formulation shifts and tighter lot controls. No resin leaves the facility unless it passes a mix of process simulation tests — drop tests, tension, surface rub and chemical resistance — that mirror what downstream workers, assemblers, and even customers will do to final parts. This focus on reliability goes far beyond the datasheet minimums standard ABS grades rest on.
Navigating market entry demands more than compliance in theory. Global brands require proof that resins meet regulations linking to RoHS, REACH, UL94, and automotive standards. For years, our product development team has been mapping country-level and regional norms with dedicated testing runs in accredited labs. XR409H’s track record of passing diverse country standards provides end users a smoother path to market, with far fewer headaches calling back for requalification or recertification.
Plant visits and customer technical trials teach us about the specific secondary operations — like painting, bonding, and laser engraving — that can break lesser ABS resins. Technical teams from our plant work side by side with those in downstream facilities, collecting hands-on feedback. If a partner reports unpredictable stress whitening or poor paint holdout, we review and adjust compound ratios at the next production run, then validate on real-world samples, not just test plaques. Over time, this approach transformed XR409H from a lab design into a ground-level asset for manufacturers across different sectors.
ABS XR409H steps away from generic resin characteristics by meeting real, production-driven demands: better cycle time, resilient mechanical strength, higher gloss, and reliable downstream compatibility. Each specification comes from lived experience, not theoretical benchmarks. Continued investment in both production and customer technical support keeps raising performance baselines and helps avoid pitfalls that derail new component launches or certification cycles.
As markets pivot toward smarter, lighter, and greener products, XR409H’s development is guided by each user’s latest requests. The engineering and production teams see product launches linked ever tighter to supply chain reliability, process repeatability, and sustainability proof. By keeping lines open between the plant floor and the design table, we make true shifts, not just incremental resin upgrades. For manufacturers looking to balance cost, performance, and durability, XR409H gives a well-tested answer that moves from initial concept to long-term supply without the disruption of hidden trade-offs.