| HS Code | 169262 |
| Product Name | Acrylonitrile-Butadiene-Styrene (ABS) SH652 |
| Density | 1.04 g/cm³ |
| Melt Flow Index | 18 g/10min (220°C/10kg) |
| Tensile Strength | 44 MPa |
| Elongation At Break | 30% |
| Flexural Strength | 65 MPa |
| Flexural Modulus | 2300 MPa |
| Heat Deflection Temperature | 96°C (at 1.8 MPa) |
| Vicat Softening Point | 102°C |
| Shore D Hardness | 73 |
As an accredited Acrylonitrile-Butadiene-Styrene (ABS) SH652 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | ABS SH652 is packaged in 25 kg white polyethylene bags, featuring product labeling, manufacturer details, and handling instructions prominently displayed. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL): 17 metric tons per 20-foot container, packed in 25kg bags, on pallets or as loose bags. |
| Shipping | Acrylonitrile-Butadiene-Styrene (ABS) SH652 is shipped in 25 kg bags, protected from moisture and direct sunlight. Packages are securely palletized for safe transport. Each shipment is clearly labeled with product and handling information, ensuring compliance with safety and regulatory requirements. Store in cool, dry conditions upon arrival. |
| Storage | ABS SH652 should be stored in a cool, dry, well-ventilated area away from direct sunlight, heat sources, and incompatible substances. Keep containers tightly sealed to avoid moisture absorption and contamination. Storage temperature is recommended to be below 40°C. Ensure the material is protected from mechanical damage and sources of ignition, as ABS is combustible. Use appropriate containment to prevent dust generation. |
| Shelf Life | Acrylonitrile-Butadiene-Styrene (ABS) SH652 typically has a shelf life of one year when stored in a cool, dry place. |
As a direct manufacturer of ABS SH652, we serve global downstream industries that require precise performance properties and consistent quality from their raw materials. ABS SH652 demonstrates reliable mechanical strength, surface processability, and strict batch-to-batch consistency, making it suitable for industrial component fabrication in highly regulated applications. Our ABS is formulated to integrate seamlessly within modern automated production lines and supports end-makers in meeting demanding market and regulatory expectations.
OEM automotive manufacturers rely on ABS SH652 for structural and visible interior parts where mechanical properties and cosmetic finish are equally critical. OEM and Tier 1 suppliers use this grade in high-precision injection molding for instrument panels, pillar trims, and cockpit modules. The strict control of flow, gloss, and impact strength aligns with safety and appearance requirements in passenger vehicles.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
ABS SH652 is widely used in the production of housings for small electrical appliances, where electrical insulation and chemical resistance need to match design versatility. Appliance manufacturers value its stable shrinkage, colorability, and dimensional accuracy, supporting large-volume, repetitive part production for global brands under various safety certifications.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Electronics OEMs use ABS SH652 in molded structural shells for consumer devices that must balance impact resistance and precise machining tolerances. Its processing stability supports manufacturing of thin-walled, high-gloss components that require consistent surface quality for branding and user-facing touch points.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Brand toy and educational material manufacturers depend on our ABS SH652 for non-toxic, high-shine, and color-stable molded items. Its safety profile and ease of processing ensure detailed molds, snap fit assembly, and long-term colorfastness, critical for both mass market and premium product ranges meeting strict regulatory audit protocols.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Producers of domestic and commercial sanitaryware use ABS SH652 for its resistance to moisture and cleaning agents, in addition to its processability in high-volume forming of concealed and exposed plumbing fixtures. The formulation supports smooth finishes for direct chrome plating and precision inserts for mounting points.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
ABS SH652 delivers dimensional stability and resistance to office environment stresses for MFP, copier, and POS terminal casings. Equipment makers require parts with precise tolerances and reliable post-processability for silk-screening, laser marking, and anti-static coating. Consistent material flow and limited shrinkage allow high-speed molding and accurate fit with electronic sub-components.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive Acrylonitrile-Butadiene-Styrene (ABS) SH652 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8618018036652
Email: sales6@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
As a chemical manufacturer with decades behind us blending and compounding resins, we see different grades of ABS competing for attention in the market. ABS SH652 stands out because of its consistency in finished goods that demand a balance of mechanical toughness and a polished surface appearance. Producers of small appliances, automotive interior parts, and high-gloss consumer products have relied on this grade for years because it delivers not just on paper, but on production floors facing strict quality checks.
ABS, by nature, represents a blend of acrylonitrile, butadiene, and styrene—each carrying its own purpose. Acrylonitrile toughens up the polymer and resists chemical attack, butadiene adds impact resilience, and styrene delivers stiffness along with that unique gloss customers expect from high-end plastics. We’ve developed SH652 to amplify these qualities for manufacturers who want repeatable, stable performance on their injection molding lines, not just marketing claims.
Molding-grade ABS SH652 has a molecular weight and particle distribution carefully balanced to keep flows smooth during production and cooling. In our experience, labs and production teams look beyond surface numbers. They want to see how a material resists warpage and stress whitening, particularly on complex, thin-walled parts. We fill our batches with enough high-quality butadiene rubber to fend off chipping along edges and stress cracking over time. This balance is not an accident—processers have run thousands of cycles with SH652 and reported consistent part weights and shrinkage values, even as tools begin to wear.
Standard ABS grades often trade off surface finish for impact resistance, but SH652 keeps both at a premium. The resin’s melt flow works well for intricate mold designs, filling corners and reproducing fine details on textured or mirror-finished tool surfaces. Those manufacturing bathroom fittings, vacuum cleaner housings, and automotive dash panels find that SH652 holds its luster even as parts travel through downstream painting and electroplating steps. In fact, we’ve tracked end-of-line rejection rates by OEMs and noticed fewer defects due to streaks or orange peel—a direct benefit of reduced gel content and uniform particle size in our compound.
Processors often approach us asking how SH652 compares on melt index, Vicat softening point, and Izod impact strength. SH652 maintains a melt flow rate in the middle range suitable for injection molding large and small components without requiring frequent adjustments to temperature or backpressure. That makes it easier for plant managers to switch tools during long production runs. With a Vicat value high enough to withstand moderate heat, finished goods maintain form even after repeated exposure to sunlight or household cleaning cycles.
Production lines running on SH652 notice a reliable notched Izod impact value that reduces customer complaints about brittle breakage in cold conditions. In field feedback, we’ve heard parts made from this grade casually endure the kind of knocks and dings that cheaper alternatives cannot handle. Companies making toys and helmet shells, two areas where shock and drop resistance matter, stick to this material so they sidestep the batch-by-batch guessing games seen with recycled or off-brand resins.
Our compound maintains a white base with near-zero yellow index, critical for companies adding colorants or producing unpainted white goods. Customers using SH652 for kitchen appliance fronts, remote-control housings, or bathroom accessories share that they meet or exceed gloss and color retention standards over several years in service. We attribute this to controlled addition of styrene and tight compounding temperatures—gradual heating, not shortcuts, keeps color drift and overgelling at bay.
On a production scale, many forget the challenges faced on the plant floor. Inconsistent granules, moisture absorption, or swing in pellet size can cost more than just a late shipment—it can hurt a manufacturer’s reputation. Our team manages raw material storage and drying protocols vigilantly because acrylonitrile can pick up water if left open to airborne humidity, which leads to splay marks and poor surface finish. We run moisture tests hourly, not just at the start of the day, and work alongside molders to dial in drying and dosing guidelines. This hands-on support is often overlooked by generic suppliers who treat customers like statistics instead of partners in quality.
The impact of these efforts shows up in OEE calculations. Clients running SH652 note short startup times, minimal barrel purging, and stable color after the initial shots. Process engineers feedback that SH652 allows them to drop cycle times by a small margin without sacrificing part appearance, freeing up presses for higher throughput. Those working to zero in on ERP and MES data see fewer stoppages due to resin-level faults, which speaks directly to the reliability manufacturers look for but rarely find on a supplier specification sheet.
Sometimes, manufacturers reach out after running cheaper ABS options that promised fancy numbers but jammed their hot runners with unmelted clumps or left stringing marks at gate locations. Product recalls have even cropped up in some markets because of uncontrolled dust contamination or poor lot-to-lot color uniformity. In our operations, we enforce batch traceability that allows both our technical sales and the customer’s own QA team to audit every process step, down to feedstock lot and compounding zone. Colored masterbatches and flame-retardant versions can be produced on request, but the base integrity of SH652 never gets compromised by these customizations.
Over the years, we’ve seen customers use SH652 in surprising ways. Some use it to mold two-component parts, overmolding softer PVCs or elastomers onto an SH652 base. Because the grade accepts paints and reactive adhesives without surface energy modifications, their lines cut out expensive pre-treatments. We’ve watched large runs of cosmetic containers and laptop chassis go through ultrasonic welding, and they come out clean—no edge discoloration or blown seams.
Automotive suppliers pushing for higher productivity leverage SH652’s flow stability to reduce tool wear and cut down on weld line visibility. They feed this resin into multi-cavity molds with narrow vents, previously a problem zone for short shots and poor air discharge. Household appliance OEMs use SH652 to ensure visible parts keep their precision even after decorative finishing or chrome plating. The grade’s low-stress whitening and even gloss coverage let their parts pass stringent supplier approval processes for international exports.
As one example, an outdoor consumer products company fought through seasons of cracking and yellowing in bike helmet shells using imported ABS granules. Switching to SH652, parts held up in hot, humid climates without surface chalking and passed repeated impact tests that their previous material couldn’t meet. It’s those quiet successes—less field return, improved first-pass yield—that have built the trust manufacturers show in this resin.
On production lines, trouble often starts when conditions change: temperature swings, mold fouling, or sudden line speeds. Our technical service group stays in close contact with maintenance teams, helping set up proper back pressure, drying times, and degassing routines. Once, a customer ran into flow marks on a high-gloss vacuum cleaner part; after on-site troubleshooting, we adjusted the melt temperature profile and swap granular feed sequence, eliminating the surface blemishes. Our door stays open to process engineers, not just procurement managers, as consistent part quality depends on plant-floor realities as much as on raw material properties.
Sometimes, customers want to push thinner wall sections or add complex ribbing to their parts. SH652’s melt flow and gel-free profile lets them experiment with these features without risking sink marks or brittle failures at notches. Through collaborative trials, one appliance firm cut component wall thickness by over 12% while holding the same impact resistance. We work through these projects together, with our process engineers sharing compounding data and small-lot test feedback. Partnerships like this help our customers stay ahead in competitive markets.
Paint and adhesion issues often stem from surface oils or static buildup, not the resin itself. For those needing perfect adhesion, we walk through pre-paint cleaning methods and anti-static treatments proven to work with SH652. Our staff provides maintenance teams with a set of troubleshooting checks, from venting and ejection timing adjustments to ultrasonic welding setups, for maximum productivity and top-tier aesthetics. These support measures aren’t one-size-fits-all; they grow out of thousands of metric tons molded and assembled for export, year after year.
We know buyers line up ABS grades against each other, often based only on cost or a surface reading of technical data. SH652 doesn’t aim to undercut commodity or repurposed resins; instead, its repeatability in demanding, high-quality parts sets its value. Competing blends sometimes promise higher impact or gloss, but suffer with poor lot uniformity, rough pellet appearance, or volatile flow. SH652 undergoes strict controls at every blend and extrusion step, making its performance durable from batch to batch.
Industry buyers use SH652 for visible consumer product casings, panels, and covers; while other grades might sneak into hidden interior parts, most firms need a consistent, reliable resin for what meets the customer’s eye. Attempts to substitute with recycled or downgraded ABS grades often lead to warping, color streaks, and lower drop strength—pushbacks we’ve seen firsthand in customer audits. Some molding operations try improving commodity ABS batches by blending in impact modifiers or color concentrates, only to hit unpredictable troubles with weld lines or gate splay.
SH652 saves time and headaches because regular QC keeps the resin within tight flow and mechanical standards. We document property certificates, provide pigment compatibility advice, and even offer guidance on correct dryer and screw settings for our resin. New entrants struggle to offer this full cycle of technical backup for every run. Our advantage comes from both raw material selection and process know-how—skills earned batch by batch, not borrowed from spec sheets.
We’ve seen more clients ask about eco-profiles and regulatory compliance. SH652 meets RoHS requirements and excludes many substances flagged by major regulatory lists for consumer plastics. Chemical suppliers must watch for added contaminants during compounding, as even a tiny slip-up can risk a costly product recall. Our batch labs test for common banned substances and volatile organic levels, helping downstream users build trust with their buyers.
Large brands exporting finished goods to the EU or North America ask for detailed compliance documentation, as well as declarations for packaging and end-of-life management. We’ve adapted SH652 processing lines to cut down on scrap, recycle dust offcuts, and support pelletizing excess for future runs. While not a biopolymer, SH652 keeps production cleaner, as stable blends reduce off-spec batches and lower energy use during molding. As the market continues to push for greener plastics, we invest in filtration upgrades and emissions control—practices that help both current production and future sustainability targets.
In the years since we began compounding and supplying ABS, customers have pushed us to innovate, troubleshoot, and deliver to ever-tighter tolerances. Each batch of SH652 carries the sum of these lessons. Factory audits, line visits, and customer feedback loops guide our improvements; we track part failure causes, not just raw yield numbers. Designed for the mold maker doing quick tool changes and the OEM running long, uninterrupted production cycles, SH652 answers more than technical specs—it responds to everyday pressures faced in plastics manufacturing.
Material shortages and price spikes have led some buyers to pivot to secondary sources. Our long-term clients report increased downtime and tougher post-mold finishing with unfamiliar resins. By sticking with proven grades like SH652, processors minimize shifts in shrinkage, gloss, and impact, letting them sell higher-value goods with fewer returns. The material also cuts post-mold cleaning, since fewer black specks or gels end up in parts due to our proprietary filtration steps. Buyers need partners who anticipate problems, not simply sell bulk pellets.
We are committed to refining SH652’s characteristics, pushing its performance, and responding to the field’s changing needs. Our product team reviews customer process data and fine-tunes compounding parameters to keep up with new mold technologies, robotic part handling, and evolving safety standards. As manufacturers upgrade their plant automation, we adapt resin feeding and drying process guides to suit their new equipment. This open exchange builds product reliability beyond what a standard catalog listing can provide.
While some grades of ABS answer a few needs, SH652 remains one of the few to cover gloss, mechanical strength, and reliable coloration across a wide production window. From small-lot specialty molding to mass-market export goods, the resin holds its shape and look under many post-processing conditions. We support customers not just by shipping pellets, but by sharing technical knowledge, onsite troubleshooting, and production analytics.
Every improvement in SH652’s consistency and process friendliness opens new markets for our partners—helping them reach quality certifications, win OEM work, and build trusted brands in global trade. The journey doesn’t end with a single delivery; it’s built on the daily commitment to getting details right, supporting process engineers, and learning together with our customers. It’s that experience and dedication that’s built SH652’s reputation in demanding industries, and it’s what we’re proud to offer, from our factory floor to yours.