| HS Code | 195379 |
| Product Name | Acrylonitrile-Butadiene-Styrene (ABS) SA927 |
| Manufacturer | LG Chem |
| Type | ABS Resin |
| Density | 1.04 g/cm³ |
| Melt Flow Index | 22 g/10 min (220°C/10kg) |
| Tensile Strength | 44 MPa |
| Flexural Strength | 65 MPa |
| Izod Impact Strength | 23 kJ/m² |
| Heat Deflection Temperature | 95°C (at 1.8 MPa) |
| Hardness | Rockwell R 110 |
| Elongation At Break | 32% |
| Color | Natural |
As an accredited Acrylonitrile-Butadiene-Styrene (ABS) SA927 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | ABS SA927 is packaged in 25 kg moisture-resistant, sealed, white polyethylene bags, clearly labeled with product name and safety information. |
| Container Loading (20′ FCL) | A 20′ FCL typically holds about 16-20 metric tons of Acrylonitrile-Butadiene-Styrene (ABS) SA927, packed in 25kg bags. |
| Shipping | Acrylonitrile-Butadiene-Styrene (ABS) SA927 is shipped in sealed, moisture-resistant bags or containers to prevent contamination and degradation. It should be transported in cool, dry conditions, avoiding direct sunlight and heat sources. Ensure compliance with relevant transport regulations and safety guidelines for handling thermoplastic polymers. Store upright on pallets to prevent package damage. |
| Storage | Acrylonitrile-Butadiene-Styrene (ABS) SA927 should be stored in a cool, dry, and well-ventilated area, away from direct sunlight and sources of heat or ignition. Keep containers tightly sealed to prevent contamination and moisture absorption. Store away from strong oxidizing agents, acids, and solvents to ensure stability and maintain material quality. Proper labeling and safety precautions are recommended. |
| Shelf Life | The shelf life of Acrylonitrile-Butadiene-Styrene (ABS) SA927 is typically 2 years when stored in cool, dry conditions. |
ABS SA927 is a specialty-grade thermoplastic designed to deliver balanced impact strength, dimensional stability, and surface finish for manufacturers operating in demanding processing environments. As the direct producer, we support industrial partners from initial material integration to high-volume fabrication across specific sectors, ensuring consistent compliance and performance in every downstream application outlined below.
Vehicle interior producers incorporate this ABS grade in dashboard consoles, door panels, and trim assemblies requiring high-impact resistance, low warpage, and stable color retention under thermal cycling. Manufacturers rely on this raw material for its flowability during complex mold geometries while meeting strict industry safety and emissions criteria.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Large and small appliance manufacturers use this ABS in exterior and structural components like washing machine panels, vacuum cleaner bodies, and refrigerator trims. The grade's high gloss, chemical resistance to detergents, and ease of processing are critical in meeting extended product service cycles and uniform appearance requirements.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
This ABS grade is integrated in casings, bezels, and mechanical frames for electronic devices such as monitors, printers, and set-top boxes. It offers dimensional precision, resistance to environmental stress cracking, and compatibility with anti-EMI surface treatments required by electronics assembly operations.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Toy manufacturers utilize this grade for its balance of shatter resistance, safe coloring, and fine-detail moldability in blocks, construction kits, and electronic educational toys. All coloring systems are selected for conforming to child safety requirements in primary markets, reinforcing physical and chemical safety profiles.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Manufacturers of bathroom fixtures and water-handling components specify this material for soft-edged, scratch-resistant parts such as shower handles, faucet shrouds, and toilet flush plates. The grade’s compatibility with surface metallization and long-term water exposure resistance provides added value across visible and functional segments.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Luggage shell and custom protective case manufacturers exploit the impact cushioning, ductility, and paint adhesion properties of this ABS material, producing lightweight yet strong designs suited for frequent handling, transit shock, and surface decoration through screen or digital printing methods.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive Acrylonitrile-Butadiene-Styrene (ABS) SA927 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8618018036652
Email: sales6@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
As the team behind the actual production of Acrylonitrile-Butadiene-Styrene SA927, we start with one certainty: there’s no shortcut to consistency in plastics. We’ve poured experience into every batch of SA927. In our hands, raw monomers—acrylonitrile, butadiene, and styrene—run through a process we've tuned for maximum control, ensuring each pellet matches the high expectations of manufacturers across industries. From the way our emulsions blend, to the temperate balance during polymerization, every step shapes a result you can feel and see in the final part.
Hand-in-hand with our engineers, customers have shaped SA927 to fill gaps they found with earlier grades. The output? Resin that covers key concerns: mechanical strength, surface finish, and process reliability over long runs. In our experience, general ABS can wander between impact performance and mold stability. SA927 beats this balance. The chemistry delivers toughness, yet its flow never drags during injection. Molders see fewer rejects and less downtime—even when complexity rises.
Comparing grades, standard ABS feels brittle as wall-thickness dips below a few millimeters, and weakens further if the part sits in sunlight or faces rough handling. Customers who've switched to SA927 for automotive trim, office equipment, and housings say they saw impact resistance that kept parts from cracking far longer, even under abuse. There’s a rugged flexibility at the core—one we trace back to tighter polymer chain control inside our reactors. This isn’t marketing talk; over years of test runs we’ve found SA927 leads to real-world durability.
Not every ABS grade is built equal—or by people who invest in relentless process control. Our lines produce a copolymer structure with a rubber phase size optimised for stress distribution. That means fewer brittle zones and more consistent energy dissipation on impact. We hold our copolymerization pressures stable, so chain branching stays predictable batch after batch. Anyone running a compounding or injection shop knows how much this determines yields.
High-end consumer electronics and automotive panels demand a material that keeps its finish under stress. SA927 consistently achieves high gloss with minimal flow marks because our melt viscosity window aligns tightly with common screw speeds and barrel profiles. We’ve cut yellowing and surface waviness, especially under fast cycle times, by refining our anti-oxidant dosing.
Every kilogram of SA927 comes off our line intended for environments where failure costs more than money—it can mean product recalls or bad reputations. The recipe we use takes knowledge collected through constant feedback and thousands of trial hours inside real factories. Our test pieces live the same life as production goods: heat-soaked in warehouse summers, cold-cycled through winters, subject to knocks and scrapes. Instead of chasing academic targets, our R&D process listens to the ones who build things. We tailor toughness not just for labs, but for those unpredictable moments on assembly lines or in the hands of consumers.
This drive started long before today’s batch left our silos. Years ago we faced compounding frustration from molders: shrinkage and warpage haunted complex geometry parts and nested mold tools. SA927 arose from hundreds of iterative runs, searching for a balance where polymer chains lock in place without resisting demolding. Now, toolmakers set their clearances and cycle times confidently. Fewer warped parts go to the scrap bin, and pack pressures relax even at tight corners. For anyone running a large shop, this turns into time, material, and operational savings that stack up across months.
Today’s devices—from smart home appliances to industrial control panels—demand shells that don’t just enclose but also protect, insulate, and latch securely. SA927 answers with an elastic modulus that holds up over millions of cycles. Components latch and unlatch repeatedly without stress whitening. Where others saw hairline cracks at hinge points, our partners keep crisp edges and working snaps. Beyond dimensional stability, our resin keeps close tolerances even after regrind, so lean operations reclaim scrap without worrying about performance loss in the next round.
Our polymer scientists run differential scanning calorimetry and melt flow index tests on each lot, constantly cross-referencing finished part properties. This lab discipline helps minimize surprises downstream. Plant operators can lean on a record of batches that perform predictably at both high and low shear injection, no matter equipment brand or age.
Instead of promising “one size fits all,” SA927 was formulated for those who want measurable dependability. Our Izod impact numbers surpass standard ABS grades by margins verified in third-party testing. Heat distortion temperature keeps parts functional in dashboards exposed to direct sun or in internal mechanisms next to motors. We have injected parts for power tool manufacturers who subject every shipment to drop and crush tests—feedback from the field confirmed less cracking, which points to the real toughness inside each pellet.
A lot of manufacturers ask about paintability or print adhesion. The skin we bake onto SA927 holds ink, foil, and coatings with more grip and less bleed, which earns approval from consumer product lines that demand retail-perfect appearance. Meanwhile, for parts needing metallization, our surface chemistry supports vacuum metal deposition and chrome plating with minimal pre-treatment. There’s no guessing at adhesion step—years of tryouts back up every claim.
We know downstream safety matters. For years, our labs have reduced trace organics and migrated to low-emission additive packages, cutting VOC release. RoHS and REACH compliance isn’t a marketing checkbox for us—it’s a promise to the workers who shape these parts and the end users who handle them daily. There’s no shortcut: every compounding and extrusion step follows strict controls to keep extraction levels low. Many partners running toys, electronics, or food-contact lines regularly audit our process and get open access to formulation data and FCM compatibility reports.
On waste handling, our pelletization and dust capture loops cut airborne particles well within worker safety norms. Partners working with post-consumer or plant scrap granulate SA927 cleanly, with minimal loss in properties after melt reprocessing. The internal regrind capacity reflects years of trial-and-error tuning, which lets fabricators hit higher sustainability targets without risky trialing in their lines.
Real problems demand more than quick fixes. Sometimes a line throws up short shots, flow lines, or stress cracks once the mold tool gets complex. Our engineers have crawled onto factory floors and under presses, running tests side-by-side with customers. We’ve seen that dialing in barrel temperature and backpressure brings out the best in SA927. Often, moving injection speed up a notch resolves surface waviness, while holding time extension stabilizes shrinkage. For shops that swap in recycled streams, we share guidance built from years running blends in our own labs—helping head off contamination or property loss before it lands.
Unlike distributors who pass the buck upstream, we log every batch’s journey and intervene early if issues surface downstream. Many clients have our technical contact on speed dial for exactly this reason—the team knows SA927 as deeply as their own lines, and can suggest changes that matter. This hands-on relationship, forged by shared troubleshooting, drives wider adoption and trust in a product that’s seen more operating hours and unexpected stresses than any brochure could predict.
Industrial designers today don’t slow down for the old constraints. Smaller, more intricate tools, thinner wall sections, and complex undercuts demand materials that fill out details but still demold reliably. Our team worked closely with high-precision molders to confirm SA927 flows into capillaries they once thought impossible—delivering sharp radii and subtle textures without cold shuts or gloss loss at the surface. In multi-material assemblies, compatibility questions matter; SA927 bonds tightly with ABS/PC alloys or soft-touch overmolds, which gives designers the freedom to push product lines in new directions.
Cycle times shape margins in every plant. With SA927, we’ve seen high-cavity molds complete more shots per hour as a direct result of flow stability and cooling response. Scrap rates drop not luck, but calculation—our experience tuning shrinkage behavior means fits stay snug, and operators don’t waste shifts adjusting hold times or fighting out-of-spec fill. It’s not just about what comes off the press; in post-processing, less sanding and polishing are needed, so the parts reach packing lines faster.
Factories running high-mix, low-volume programs appreciate the forgiving nature of SA927. Shifts between part sizes don’t force major settings overhauls. In tool shops switching from legacy resins, down-gauged panel parts cut weight for manufacturers worried about shipping costs, while mechanical properties remain strong enough to skip reinforcements. One electronics OEM, focused on light gray housing, credited our pigment dispersion for cutbacks in on-line lot adjustments and rejects flagged for marbling or shadowing.
Auto suppliers leaned in when side impact standards tightened—they saw direct drop-in benefit with SA927 in pillar covers and trims, which shrugged off door slams and direct sunlight over longer field cycles. Prototyping lines, who once juggled ABS grades to keep rapid tools printing, switched after confirming SA927 could handle their wide print speed range—and survived basic functional tests without shattering or loss of finish. For teams rolling out new products, this builds real confidence in bringing concepts to market.
No process reaches perfection standing still. Our facilities run full-scale trials of SA927 alongside emerging grades and tweaks from our materials lab. Feedback flows directly from molding shops and assembly lines to polymer chemists and process engineers—closing the loop on performance wishes and recurring line hitches. Small adjustments, like narrowing the moisture removing pre-dry window, have emerged from real-world runs, not strictly from data sheets. We log lessons gained from every unusual part or new partner, and each drives the next batch.
Our teams carry this know-how to collaborations with machinery suppliers, constantly stress testing the polymer under evolving barrel profiles, nozzle geometries, and automated scraping. This keeps us on the pulse of what works best on tomorrow’s advanced lines and helps machine-makers write up settings that hand over the best possible start-up to operators using SA927 for the first time.
SA927 represents more than just another line of ABS. The time and trust invested—by us and manufacturing clients everywhere—shows in the results seen in shaped parts, not just in theoretical numbers. End users benefit from finishes that last, shells that protect the electronics or mechanisms within, and the reliability to keep business running. Just as importantly, the ones working with the resin every day enjoy more predictable shifts, fewer unscheduled stops, and the pride that comes from feeding a material into the press that behaves itself, batch after batch.
We’ve seen what makes a polymer truly perform: transparency about what went into it, accountability for its behavior during production, and ongoing commitment to adjust as global standards or user needs evolve. With SA927, every delivery reflects lessons earned one mold at a time—and the door’s never closed to the next improvement. That’s the reality of production, and it’s how we've built a trusted material with a reputation grounded in real-world use.