| HS Code | 418618 |
| Product Name | Acrylonitrile-Butadiene-Styrene (ABS) RAA36422719 |
| Material Type | Thermoplastic |
| Color | Natural |
| Density | 1.04 g/cm³ |
| Melt Flow Index | 25 g/10 min (220°C/10kg) |
| Tensile Strength | 45 MPa |
| Elongation At Break | 25% |
| Flexural Modulus | 2100 MPa |
| Heat Deflection Temperature | 90°C (at 1.8 MPa) |
| Processing Temperature | 220-260°C |
| Moisture Absorption | 0.3% (24h, 23°C) |
| Flammability Rating | UL94 HB |
As an accredited Acrylonitrile-Butadiene-Styrene (ABS) RAA36422719 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | The packaging contains 25kg of Acrylonitrile-Butadiene-Styrene (ABS) RAA36422719, sealed in a sturdy, clearly labeled industrial-grade plastic bag. |
| Container Loading (20′ FCL) | A 20′ FCL container holds approximately 18–22 metric tons of ABS RAA36422719, packed in 25 kg bags, palletized for export. |
| Shipping | The shipping of Acrylonitrile-Butadiene-Styrene (ABS) RAA36422719 requires secure, moisture-resistant packaging, typically in 25 kg bags or bulk containers. Ensure material is kept dry, away from direct sunlight, and transported according to standard polymer shipping guidelines. Monitor for leaks or damage, and comply with relevant safety, labeling, and transport regulations. |
| Storage | Acrylonitrile-Butadiene-Styrene (ABS) RAA36422719 should be stored in a cool, dry, and well-ventilated area, away from direct sunlight, heat sources, and incompatible materials such as strong acids and oxidizers. Containers should be kept tightly closed to prevent contamination. Avoid exposure to moisture and ensure proper labeling for easy identification and safe handling. |
| Shelf Life | The shelf life of Acrylonitrile-Butadiene-Styrene (ABS) RAA36422719 is typically 2 years when stored in cool, dry conditions. |
As a direct manufacturer of ABS RAA36422719, we deliver high-quality material to industries requiring dependable thermoplastic performance and process consistency. The following application scenarios demonstrate how our ABS integrates into downstream manufacturing environments, matching regulatory frameworks, specific dosage requirements, process steps, and the physical demands of end-use markets.
Our ABS RAA36422719 supports automotive OEMs and component suppliers in the production of precision-molded interior parts, balancing impact resistance and appearance consistency for dashboards, instrument panels, and trim assemblies. Absence of odor, specialized UV stabilizer compatibility, and downstream colorability make the material favored for ergonomic surfaces where tactile and visual standards are tightly controlled throughout Tier 1 and Tier 2 supply chains.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Major appliance assemblers specify our ABS for its process stability in large-scale injection molding, allowing manufacturers to achieve gloss control and high-impact strength in enduring white goods and consumer electronics. Material purity and resistance to stress cracking during long cycle times support compliance with electrical and thermal safety protocols.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
ABS RAA36422719 meets strict non-toxic requirements necessary for manufacturing safe, vividly colored toys and educational sets, where dimensional stability, impact strength, and consistent color dispersion are critical. Our production caters to high-volume automated molding lines, supporting tight part tolerances and compatibility with ultrasonic welding and decorated assembly steps.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
For manufacturers producing enclosures and housings for office equipment, computer hardware, and telecom devices, our ABS ensures close tolerance molding, dielectric strength, and flame rating performance. Consistency in melt flow index delivers productivity benefits on multi-cavity molds, while compatibility with EMI shielding coatings supports advanced electronic applications.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Luggage manufacturers leverage our consistently rated ABS grades for production of mildew-resistant, lightweight, yet durable hard shell suitcases. The material provides balance between impact absorption and scratch resistance, ensures dimensional stability over prolonged travel exposure, and permits efficient lamination or direct printing of surface graphics in continuous assembly environments.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive Acrylonitrile-Butadiene-Styrene (ABS) RAA36422719 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8618018036652
Email: sales6@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
ABS resins have been our bread and butter for decades. Looking back on daily production, it’s clear that small changes in formulation have an outsized impact on how the plastic feels, how it processes, even on its color and gloss. The RAA36422719 grade stands out in our catalogue because of its balanced performance, precise formulation, and reliability for molding houses and extrusion plants worldwide.
Factories churn out a long list of ABS grades, but RAA36422719 attracts the attention of engineers who know the requirements of durable consumer goods, automotive trim, and thin-walled parts. By controlling the mixing of acrylonitrile, butadiene, and styrene on-site, we can push the impact resistance up without causing embrittlement—a tricky balance not every factory manages. Monitoring the emulsion polymerization stage, we use finely tuned temperature and feedstock ratios to keep the molecular structure consistent batch-to-batch. This grade targets a medium flow index, suiting it for fast-cycle injection without sacrificing appearance or mechanics.
Clients working with products like office equipment housings or mirror-finish appliance casings look for resin that fills large molds without swirl marks or flashing. RAA36422719 meets these needs, thanks to internal degassing and a proprietary antioxidant blend that resists yellowing. We handle all compounding and pelletizing in-house, resulting in fewer lot-to-lot deviations. On the line, fewer jams, cleaner parts, and more predictable machine settings mean less waste—a tangible benefit for operations running three shifts.
Testing for RAA36422719 begins before the reactors cool. We use a batch of standardized molds—dog bones for tensile tests, standard bars for impact, plates for gloss and color readings. Over the course of each production run, inspectors walk the floor with a full slate of gauges, resistance meters, and colorimeters. Tensile strengths routinely hit the upper end for ABS, and we log notched Izod values twice on every batch. These numbers get sent straight to buyers—no shaping or cherry-picking.
Real-world feedback often proves more valuable than lab numbers. We receive regular updates from end users, especially from appliance assemblers and tool manufacturers. They send scrap rates, detail out surface defect counts, and flag any warping or splay marks. Our resin fabricators detail mold cycle times, noting whether the resin cools evenly and releases sharply. Over hundreds of batches, RAA36422719 shows fewer shrink lines and less edge curling, even in deep-draw or multi-cavity tooling, than most grades in this performance range.
Walking the plant floor for years, you get a sense for the range of applications a grade like RAA36422719 sees. Electrical enclosures, switch housings, luggage shells, and cladding for consumer appliances all use this resin. The balance of toughness and surface appearance makes a difference in products that get handled daily or need to look sharp in a showroom. Medical device casings, where appearance ranks almost as high as mechanical strength, serve as another common application.
In export markets, buyers prefer this grade because it handles the stress of shipping, stacking, and fluctuating warehouse climates. Car interior panels and seat components benefit from the resin’s stability under heat and summer sunlight, thanks to our anti-UV compounding. Sporting goods makers value the impact strength and color retention, which keep gear looking clean through rough use. These insights don’t come from a datasheet—they’re shaped by feedback over years, seeing the same batch marks on parts overseas, and learning which tweaks matter to end users.
Good ABS depends not just on a working recipe, but on strict control at every production stage. We oversee everything on-site, from the sourcing and blending of monomers to the final pellet packaging. No truck arrives with unchecked raw styrene, and every polymer batch draws from in-house tested sources. Resin batches roll out only after passing Q.C. benchmarks—tolerance on melt flow, color, and gel count falls within unusually tight specs, based on customer process data, not just industry averages.
Static-dissipative and chemical-resistant modifiers are precisely metered, using real-time feedback from manufacturing lines. Our operators spot sheet or fiber contamination early by running periodic filtration and ash content checks. Users report lower tool fouling and longer screw life, thanks to this attention during compounding. The combination of in-house blending, certified pigment integration, and repeatable process monitoring cuts down product variability and holds tight physical specs over thousands of tonsannually.
Comparing RAA36422719 to commodity ABS or off-the-shelf imported lots, our lab and customer experience show two consistent differences: better impact tolerance in finished goods, and greater color stability in long production runs. Many generic resins skew either toward cheaper filler or inconsistent polymer chain distribution, leading to stress marks or surface fading during post-processing like painting or plating. A run with generic resin will often yield polybags of regrind and out-of-spec parts when pushing cycle times; with RAA36422719, customers report reduced hold-up and fewer costly line stoppages.
Buyers choosing between ABS grades often cite RAA36422719’s ease of coloring, important for consumer electronics and retail displays. The combination of high-gloss potential and manageable shrink means more straight-out-of-mold parts without post-finish steps. The resin holds up in high-temp environments, handling the demands of electronics housings, thanks to internal stabilization that resists deformation and relieves stress at weld lines.
Our supply chain runs from refineries and chemical plants that have demonstrated the consistency we require. We don’t switch polymer sources looking for short-term savings. Any change in butadiene or styrene supply introduces drift in physical properties—it only takes a small variance to show up in sheet or molded products downstream. Over years, buying managers and production supervisors relying on RAA36422719 come to value these consistencies, since it keeps molding conditions stable and reduces machine downtime.
Certain ABS competitors cut costs by blending in off-spec or recycled feedstocks, resulting in lower initial pricing but unreliable performance. Mold techs complain about yellow specks and off-tone bars, requiring added sorting or batch discards. With RAA36422719, the strict raw material specification minimizes post-extrusion defects and keeps processing windows wide—customer tooling investments remain protected because the resin behaves as expected, shipment after shipment.
Factory partners running multiple machines share feedback with our team—ABS RAA36422719 pellets feed cleanly in precision hoppers, and the cohesive pellet size reduces bridging problems. Color houses blend masterbatch directly into the resin with high compatibility, thanks to careful selection of lubricants and dispersing agents during compounding. In plant conditions with varying humidity, our product’s low moisture sensitivity means less drying time; dryers work more efficiently, and issues with hydrolytic breakdown drop off almost entirely.
On fast-cycle injection lines or high-shear extruders, processors consistently achieve a high-gloss surface without visible weld lines or blushed spots. Unlike some ABS grades that soften or warp near barrel heaters, RAA36422719 maintains dimensional accuracy after repeated starts and stops—reportedly fewer mold sticking incidents and more predictable ejection patterns. These characteristics come out of daily collaboration with plant engineers, as well as in-house tooling trials using aggressive cycle testing protocols.
All of our ABS grades, including RAA36422719, meet regulatory standards for restricted substances—phthalates, heavy metals, flame retardant levels—set by North America and Europe. Third-party audits and customer-led plant inspections are routine, covering not only compliance but wider environmental impact reviews. Our process wastewater undergoes full recycling and on-site treatment before discharge; air emissions are monitored and reported under local guidelines, not just by internal thresholds.
Material efficiency is an ongoing priority: scrap generated during granulation and packing is collected and repurposed in qualified remelt cycles for non-critical parts, keeping overall factory waste low. Our packaging partners print all resin sacks on-site, eliminating the transport waste and providing point-of-origin tracking for every shipment. Shipping managers confirm that barcode and lot traceability integrates with distribution partners’ systems for easy recall or quality tracking, even years out from sale.
End-users today place value on transparency, and as a manufacturer, our process aligns with those expectations. Facility tours include open access to compounding and pelletizing lines, not just showroom samples. Brand owners and OEMs send technical audit teams to walk the floor, verify real feedstock, and audit Q.C. practices—we encourage it. This openness has led to design adjustments upstream, where our polymer chemists and tooling technicians collaborate to preempt product failures or costly post-production tweaking.
Proactive updates reach customers ahead of scheduled resin deliveries. When any incoming feedstock shifts in specification, we communicate early to allow for molding line calibration. Annual performance reviews, conducted through direct contact with engineering teams, check on resin performance, color accuracy, and reject rates. Problems get addressed with practical solutions—recipe changes, process temperature adjustments—not with generic responses.
Engagement with end-users creates a feedback loop that’s impossible to maintain as a distributor or reseller. Insight into die weld failures, material hang-up, and surface finish improvements only comes from knowing the precise band of variability each grade presents. That sense develops on the line, adjusting parameters, running resin lots of RAA36422719 through aggressive corner-case scenarios, and building a history of which process tweaks actually yield returns.
Greater transparency and process control over our own compounding—no open-market sourcing or unknown third-party blending—assures buyers that the product they receive matches batch records and initial specification. This forms a foundation for ongoing, mutually beneficial supply agreements, not just transactional spot buying. Brand owners plan long-term, knowing the likelihood of product or process drift shrinks with each year of steady supply.
The ABS market faces shifting tides: raw material volatility, increased calls for recycled content, tightening performance specifications across industries. RAA36422719 draws on stable supply contracts and continual testing for compliance to stay ahead of sudden market shocks. Recent upgrades to bulk storage and in-line additive dosing keep possible contamination at bay, allowing for gradual evolution of formulations in sync with customer IT and manufacturing upgrades.
Our product team actively researches bio-based composites and recycled content strategies. While RAA36422719 relies on virgin feedstocks for guaranteed performance, trials for closed-loop reprocessing systems are based on customer input—especially from automotive and large appliance manufacturers eager to hit recycling targets without trading away reliability. Open communication with end-users guides our roadmap, ensuring that any changes tie back to field-tested needs and not just regulatory checkboxes.
Every lot of ABS RAA36422719 embodies the real-world experience that comes only from day-in, day-out operation of a chemical manufacturing facility. It reflects not just the sum of its test reports, but the ongoing, practical collaboration with product designers, molding engineers, and technical buyers. Over years, the grade has gained its reputation for high performance, stable color, and minimized process headaches—not as a theoretical achievement, but as the natural result of direct and sustained manufacturing focus.