LG Chem, Ltd

Products

Acrylonitrile-Butadiene-Styrene (ABS) RAA36422718

    • Product Name: Acrylonitrile-Butadiene-Styrene (ABS) RAA36422718
    • Chemical Name (IUPAC): Acrylonitrile butadiene styrene
    • CAS No.: 9003-56-9
    • Chemical Formula: (C8H8•C4H6•C3H3N)n
    • Form/Physical State: Solid
    • Factroy Site:
    • Price Inquiry: sales6@ascent-chem.com
    • Manufacturer: LG Chem, Ltd
    • CONTACT NOW
    VTB
    Specifications
    HS Code 314156
    Product Name Acrylonitrile-Butadiene-Styrene (ABS) RAA36422718
    Material Type Thermoplastic
    Color Natural
    Density 1.04 g/cm³
    Melt Flow Rate 25 g/10 min (220°C/10kg)
    Tensile Strength 42 MPa
    Flexural Modulus 2200 MPa
    Heat Deflection Temperature 95°C
    Elongation At Break 20%
    Hardness Rockwell R 105

    As an accredited Acrylonitrile-Butadiene-Styrene (ABS) RAA36422718 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing The packaging for Acrylonitrile-Butadiene-Styrene (ABS) RAA36422718 consists of 25 kg industrial-grade, moisture-resistant polyethylene bags, clearly labeled.
    Container Loading (20′ FCL) 20′ FCL loads approximately 16-17MT of ABS RAA36422718, packed in 25kg bags, palletized or loose, for efficient shipping.
    Shipping Acrylonitrile-Butadiene-Styrene (ABS) RAA36422718 is shipped in sealed, moisture-resistant packaging to prevent contamination. The material is typically transported in pellet or granule form, packed in bulk bags or boxes, and clearly labeled for handling. Store and ship in cool, dry conditions, away from direct sunlight and incompatible substances.
    Storage Acrylonitrile-Butadiene-Styrene (ABS) RAA36422718 should be stored in a cool, dry, and well-ventilated area, away from direct sunlight and sources of heat or ignition. Keep the material in tightly closed, labeled containers to prevent contamination and moisture absorption. Avoid contact with strong oxidizing agents. Ensure storage areas are suitable for plastic pellets and prevent dust accumulation for fire safety.
    Shelf Life The shelf life of Acrylonitrile-Butadiene-Styrene (ABS) RAA36422718 is typically 24 months when stored in cool, dry conditions.
    Application of Acrylonitrile-Butadiene-Styrene (ABS) RAA36422718

    Applications of Acrylonitrile-Butadiene-Styrene (ABS) RAA36422718 in Industrial Manufacturing

    ABS RAA36422718 plays a critical role in a wide range of advanced manufacturing sectors where impact strength, moldability, and dimensional stability are essential. Below are deeply segmented industrial application fields outlining distinct technical parameters, regulatory requirements, and practical integration details for downstream manufacturers.

    1. Automotive Interior and Exterior Components

    Automotive OEMs and Tier 1 suppliers rely on ABS RAA36422718 as a core polymer for producing dashboard housings, door panels, pillar trims, and exterior mirror housings. The material offers high impact resistance, consistent gloss, and a stable performance profile suitable for injection molding processes. OEM specifications often call for UV-stabilized grades and color-matched pre-compounds to support precise interior fit and UV-exposed exterior parts.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    2. Electrical and Electronic Enclosures

    Downstream appliance manufacturers employ RAA36422718 for enclosures, terminal blocks, and relay housing shells where flame resistance, electrical insulation, and tight dimensional tolerances are critical. Customers frequently specify this material to comply with flame retardant regulations and to achieve uniform surface appearance for consumer-facing electronics.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    3. Home Appliance Structural Parts

    Major appliance manufacturers select ABS RAA36422718 for refrigerator liners, washing machine control panels, and vacuum cleaner components. The polymer provides long-term mechanical stability under cyclical loads, resists household chemicals, and maintains structural integrity when exposed to varying temperatures during service cycles. Material suppliers often fine-tune impact and gloss levels to meet appliance OEM color and tactile requirements.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    4. Medical Device Casings and Non-Invasive Components

    Medical device assemblers in the diagnostics and monitoring sectors utilize ABS RAA36422718 for blood analyzer exteriors, instrument housings, and handheld device covers. The grade’s purity profile, non-reactivity, and compatibility with sterilization processes are essential. OEMs demand precise color match and biocompatibility based on the end-use protocols in regulated markets.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    5. Consumer Electronics Structural Parts

    Consumer electronics OEMs adopt RAA36422718 for manufacturing monitor back covers, TV bezels, and gaming console housing shells. The material’s inherent EMI shielding capability with conductive fillers, crack resistance, and consistently tight molding tolerances prove critical for this sector, especially where aesthetic surface finishes and reliable mechanical protection are required.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    6. Plumbing and Sanitary Parts

    Sanitaryware producers incorporate ABS RAA36422718 for concealed cistern mechanisms, showerhead bodies, and pipe fittings where hydrolytic stability, resistance to cleaning agents, and stable mechanical performance under pressure cycling are essential. The material accommodates precise molding of functional components like valve carriers and in-wall connectors.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    Free Quote

    Competitive Acrylonitrile-Butadiene-Styrene (ABS) RAA36422718 prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.

    We will respond to you as soon as possible.

    Tel: +8618018036652

    Email: sales6@ascent-chem.com

    Inquiry

    Get Free Quote of LG Chem, Ltd

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    Acrylonitrile-Butadiene-Styrene (ABS) RAA36422718: Reliable Performance from the Manufacturer's Perspective

    A Commitment to Material Quality

    Producing ABS materials over the years has taught us that true quality doesn’t come from buzzwords or sales pitches. It takes consistency in polymerization, real-world feedback from end-users, and a willingness to intervene at every stage of production. The ABS model RAA36422718 lives up to these standards through years of practical refinement and honest manufacturing practice. Here on the factory floor and in our development labs, we know the difference between textbook-grade resin and the kind that endures the test of continuous molding cycles and demanding engineering applications. Model RAA36422718 is not just a product code to us—it signals a material developed from repeated iterations, bench-marking, and direct engagement with the needs of processors and OEMs.

    What Goes Into ABS RAA36422718

    ABS is an industry staple because of its balance between impact resistance, mechanical strength, and processability. With RAA36422718, we tuned the butadiene and acrylonitrile content to hit specific milestones set during direct feedback sessions with injection molders and end-users in automotive and consumer electronics. This grade handles repeated mechanical stress, shows consistent melt flow, and stands up to the types of aggressive surface finishing our customers demand. By paying close attention to blend ratios and polymer chain length, we’ve built something that resists cracking under rough handling and accepts a range of additives and colorants without the dull surface finish or warping that plagues low-end blends.

    Specifications and Field Performance

    Many in the industry like to rattle off numbers—tensile strength, Vicat softening point, notched Izod impact—but the message only lands if these specifications play out on the line. We’ve confirmed that RAA36422718 consistently delivers high flow characteristics for thin-wall moldings, which helps processors keep cycles short and scrap rates even lower. The thermal stability means the part comes out with clean edges and survives post-processing without residual stress. Parts built from this grade keep their shape in typical exposure scenarios, whether that means in a dashboard on a summer day or inside power tools tossed in cold storage.

    We’ve dialed in the particle size and water content right at our compounding section so you get a resin that doesn’t jam feeders or bridge in hoppers. Screenings in our pilot plant confirmed that gate freeze occurs at predictable temperatures, translating to reduced trial-and-error during mold validation runs. Customers running older machinery or higher cavitation tools often tell us they’re relieved to find a resin grade that doesn’t require constant temperature or back pressure tweaking.

    Process Integration and Practical Benefits

    Day-to-day, processors care about how material moves through their molds and how it holds up across production lots. The RAA36422718 grade demonstrates reliable flow to fill intricate geometries—buttons, clips, covers—without knit lines or swirl marks that drive up reject rates. This model responds well to short cooling cycles, minimizing color drift between lots thanks to its stable formulation. Our own team regularly runs side-by-sides against less tuned ABS grades. The difference in cycle purity and regrind tolerance becomes obvious after a few hours on the press.

    We’ve heard from technicians that they appreciate being able to add a higher percentage of in-plant regrind without running into gels or burnt specks. This translates to real savings, not just in raw material cost, but in reduced downtime for screw pulls and cleaning. The model handles pressure drops and velocity changes without losing gloss, which matters for appliance housings and interior panels where visual appeal is key.

    Comparative Strength: What Sets RAA36422718 Apart?

    From the viewpoint of those who make and use ABS every day, the difference between grades is all about reliability and versatility. RAA36422718 stands out because it runs cleanly on both high-speed and more moderate cycles. Our resin integrates with automation, allowing for faster takeout and secondary operations including pad printing and hot stamping. The parts resist stress whitening under bending and knocking, addressing a common pain point among furniture and equipment makers who need both flexibility and surface integrity.

    Comparing to generic ABS on the market, we’ve focused on batch-to-batch consistency. Our in-line spectrometry picks up resin color drift right as it happens, and our automated feedback system can adjust compounding levels on the fly. Our team saw that products made from alternative grades too often suffer from fade and yellowing on display shelves. During outdoor aging and lightfastness trials, RAA36422718 keeps a tighter color target and a molded-in luster. This matters because end-users judge quality by appearance as much as function. Customers in consumer electronics remark on the ability of this grade to take matte or high-gloss finishes without unevenness or swirling.

    Handling Real-World Requirements

    In our experience supplying manufacturers that make everything from car interiors to children’s toys, everyday concerns are not limited to just numbers on a data sheet. We’ve built customer feedback directly into RAA36422718: better resistance against common solvents and cleaning agents, which means less risk of crazing or surface pitting in the field. The grade’s toughness gives makers of helmet shells and power tool housings the assurance that drop tests won’t send them back to the drawing board for yet another redesign.

    We know from regular collaboration with toolmakers and mold designers that ABS can show signs of shearing or discoloration if melt conditions aren’t right. Our process engineers double-check melt viscosity and flow indexes during every lot run, so RAA36422718 keeps a forgiving processing window. That translates to fewer surprises during startup and color changes. It keeps production lines moving for mid-volume and mass production runs alike.

    Value Beyond the Factory Gate

    By keeping control over ingredient sourcing and blending, we stand behind the environmental performance of RAA36422718. Many of our larger customers prioritize post-consumer recycling content, and our recipe intentionally accommodates this practice without losing clarity or performance. We maintain REACH and RoHS compliance through strict incoming material audits and batch documentation. This is not just regulatory paperwork to us. It’s part of how we keep our promise to both workplace safety and market access across regions.

    Every batch runs through an in-house environmental chamber for outgassing and volatile emission tests. The data help downstream users in sensitive fields like toys and electronics to meet global safety standards without re-certifying with every batch change. We keep the process transparent so that customers always know what’s in each box they receive. Recyclability is not simply an afterthought. We regrind and reincorporate sprues, runners, and start-up material, limiting waste and keeping costs predictable throughout the supply chain.

    Designed to Evolve with Industry Needs

    Over the years, ABS manufacturing has changed. In the past, products built from legacy ABS formulas might have struggled to meet tighter requirements around chemical resistance or surface quality. Our continuous improvement ethos drives us to listen to small and large processors alike—if there’s a bad batch or a processing hiccup, it gets back to R&D for immediate troubleshooting. We maintain direct communication with OEM engineers, enabling faster iteration on customer-specific color matching, flame retardancy, or even more niche requirements like laser-weldability.

    We believe the days of faceless, commodity ABS are winding down. Our development teams regularly invite customer production specialists to pilot runs and line trials. The result is a grade like RAA36422718 that genuinely fits the unique challenges of each application, whether for a designer lamp in a living room or a dashboard vent subjected to thermal cycles. Experience in different fields—appliances, automotive interiors, recreational equipment—shows that one-size-fits-all rarely works, and so we continue to tweak and optimize in response to field failure data and maintenance trends.

    Technical Service from the Manufacturing Floor

    As a manufacturer, we don’t just deliver bags at your loading dock and move on. Our technical team sits in on tool validation runs, advising on real-world cycle times and settings based on experience with our own resins. For model RAA36422718, we’ve worked next to molders grappling with warpage in complex part geometries. Our advice draws from repeated troubleshooting—adjusting temperatures and pressures while looking for stable gloss and minimum orange peel. The resin keeps its character even on tools that push throughput to the limits.

    Many times, processors come to us after trying a cheaper blend, frustrated by material surges, deposits, or odor during high-temperature runs. We’ve built RAA36422718 to sidestep these issues: clean extrudate, low-lint, and a neutral smell that makes a difference in enclosed environments, like appliances or portable devices. Molders switching from less-refined grades often find their reject rates drop and maintenance intervals stretch out, a reflection of the care we’ve taken at the pelletizing and compounding stage. In our business, trust is built batch by batch, application by application.

    End-Use Stories From the Field

    It’s not theory that keeps a material in demand—it’s performance under pressure. In real-world production, our ABS grade gets used for parts that need strength and a pleasing appearance. Companies producing kitchen appliances rely on surface smoothness for branding decals and require consistent dimensional accuracy at every run. Consumer electronics makers use the grade’s natural resistance to surface scratching and its capacity to take fine detail from engraved molds.

    Manufacturers of automotive interior components aim for a soft-touch finish and color stability after exposure to sunlight and cleaning fluids. Our resin supports these needs, holding true color even under harsh lighting and high temperatures. During rigorous drop and torsion tests, parts built from RAA36422718 resist cracking and maintain their snaps and hinge elements for repeated use. These tangible results come from the details—how we control trace elements, how instrumentation checks pigment loading, and how each team member treats the grade with a sense of responsibility, not as a disposable commodity.

    Looking Forward: Challenges and Perspectives

    Demand for ABS continues to climb across new applications, but the bar keeps rising for quality, compliance, and environmental stewardship. As manufacturing shifts toward higher speeds and tighter tolerances, materials like RAA36422718 play a role in helping producers meet stricter customer demands without trading away reliability or cost stability. The pressure to reduce emissions and streamline supply brings us back to refining process controls and documentation, never assuming prior recipes are good enough for today’s global market.

    Keeping up with new additives, color trends, and secondary processing methods requires coordination between engineering, purchasing, and production staff. In that environment, RAA36422718’s performance and predictability help production planners and line technicians keep operations steady, with fewer unexpected production hiccups. The material supports advances in automated sorting and robotic assembly, thanks to its consistent mechanical and processing characteristics.

    ABS as More Than a Commodity

    From our experience, the best ABS grades are shaped as much by producer commitment as by any formula. RAA36422718 represents the hands-on knowledge we’ve gained from years of feedback, side-by-side production trials, and a focus on genuine improvement, not just incremental tweaks. Produced with full control over ingredient sourcing, compounding, and quality checks, the grade emerges not as an off-the-shelf commodity but as a proven material for both new designs and existing platforms.

    In practice, the grade has become a solution for technical teams who want resilience without trouble, for plant managers focused on efficiency, and for end customers who notice details in finish and strength. With this model, the conversation shifts from chasing cheaper substitutions to partnering for longer cycles and fewer surprises. That approach shapes everything from how we track batch history to how we build technical guides and support visits for our users.

    Concluding Thoughts from the Factory Floor

    Our approach to ABS is rooted in transparency, partnership, and a responsibility to maintain both performance and safety. RAA36422718 has earned its place among processors and engineers by standing up to tough demands—resisting cracks, showing bright, stable colors, and processing smoothly run after run. The knowledge built into every lot comes from decades making and working with this material, and it continues to push us to refine, support, and improve with each new production order.