| HS Code | 390524 |
| Product Name | Acrylonitrile-Butadiene-Styrene (ABS) RAA36185118 |
| Material Type | Thermoplastic |
| Color | Natural |
| Density | 1.03 g/cm³ |
| Melt Flow Index | 18 g/10 min (220°C/10kg) |
| Tensile Strength | 41 MPa |
| Flexural Modulus | 2350 MPa |
| Heat Deflection Temperature | 90°C (at 1.8 MPa) |
| Vicat Softening Point | 102°C |
| Moisture Absorption | 0.3% (24h, 23°C) |
| Flammability Rating | HB (UL94) |
| Processing Temperature | 220-260°C |
As an accredited Acrylonitrile-Butadiene-Styrene (ABS) RAA36185118 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | 25 kg white polyethylene bags labeled "Acrylonitrile-Butadiene-Styrene (ABS) RAA36185118", product details, safety icons, and manufacturer information. |
| Container Loading (20′ FCL) | A 20′ FCL can typically load about 20 metric tons of ABS RAA36185118, securely packed in 25kg bags or jumbo bags. |
| Shipping | Acrylonitrile-Butadiene-Styrene (ABS) RAA36185118 is shipped in tightly sealed, moisture-resistant packaging, typically in 25 kg bags or bulk containers. Ensure transport complies with safety regulations for thermoplastic resins. Store ABS in a cool, dry location, away from direct sunlight and incompatible substances to prevent degradation and ensure product quality. |
| Storage | Acrylonitrile-Butadiene-Styrene (ABS) RAA36185118 should be stored in a cool, dry, and well-ventilated area, away from direct sunlight, heat sources, and moisture. Keep containers tightly closed and protect from physical damage. Avoid storing near strong oxidizing agents. Ensure proper labeling and segregate from incompatible materials to prevent contamination and maintain product integrity. |
| Shelf Life | The shelf life of Acrylonitrile-Butadiene-Styrene (ABS) RAA36185118 is typically 2 years under recommended storage conditions, avoiding moisture. |
ABS RAA36185118 is a proven engineering thermoplastic that supports reliable production across high-spec industries. As an established manufacturer, we supply this raw material for several tightly regulated and technically demanding sectors. Each application below reflects real-world industrial integration, precise compliance requirements, and targeted downstream output.
Manufacturers in the automotive sector select ABS RAA36185118 for instrument panels, trim elements, pillar covers, and exterior housings, seeking its balance of impact strength, ductility, and surface finish. Engineering teams blend the material with reinforcing additives during the compounding stage before injection molding. Compliance with global automotive standards ensures compatibility with both decorative and safety-critical parts, while formulation teams adjust pigment and additive levels to meet OEM appearance and weatherability demands. The material delivers reliable dimensional stability in high-cavity tooling, supporting mass production of large-format vehicle components.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
The electronics sector favors ABS RAA36185118 for enclosures, connectors, and appliance casings that must meet impact resistance, flame retardancy, and consistent color stability. Downstream converters dose flame-retardant grades to comply with global electrical safety codes, using precision molding to create intricate geometries for PCBs and socket assemblies. Process engineers monitor drying and melt conditions to suppress warpage and retain dimensional precision. This material helps OEMs pass mandatory electrical insulation and fire safety audits, supporting reliable device operation even in consumer and industrial environments exposed to humidity and electrical stress.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
White goods and home appliance assembly lines demand materials that perform well under repeated mechanical stress, elevated temperatures, and exposure to cleaning fluids. ABS RAA36185118 joins compounding batches for items such as vacuum cleaner bodies, washing machine panels, and robust refrigerator components. Technicians often co-process the material with anti-static agents or glass fibers to enhance performance. Regulatory compliance for food contact and chemical resistance defines usage criteria, especially for refrigerator bin assemblies and internal lining parts. Efficient mold filling and rapid cooling cycles support lean mass production without surface defects.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Toy manufacturers rely on ABS RAA36185118 for products requiring strong, non-toxic, and vividly colored components with certified safety for children. The material tolerates repeated mechanical loading and maintains high color stability after compounding with certified masterbatches. Producers verify feedstocks for banned substances, introducing the granulate to molding lines with temperature and shear controls tailored for small, intricate part geometries. The downstream process facilitates easy snap fitting, painting, or printing, supporting multi-part assemblies. Final toys meet both global safety and quality benchmarks, including restricted chemical list compliance for export.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Downstream manufacturers use ABS RAA36185118 in the production of sanitary piping, drainage fittings, and non-pressurized water systems requiring impact resistance, hydrolytic stability, and ease of fabrication. Pipes and fittings emerge via extrusion with strict wall thickness and dimensional control. Technicians select formulations to balance processability with resistance to household chemicals. Installers favor ABS for lightweight assemblies and chemical resistance in bathroom and kitchen applications, with compliance checks performed for potable and waste-water use.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Small and large office machine builders choose ABS RAA36185118 for printer housings, computer monitor shells, copier covers, and internal structural supports. The material is compounded to deliver stable color, surface gloss, and mechanical strength. Production lines require rapid molding cycles for high-volume output. Formulating teams match flammability and emission requirements and batch test granules for dimensional consistency, crucial for the tight tolerances of multi-part assemblies. The raw material resists common office chemicals and UV exposure from overhead lighting.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive Acrylonitrile-Butadiene-Styrene (ABS) RAA36185118 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8618018036652
Email: sales6@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Day after day on the production floor, the needs of quality and consistency walk hand in hand with real-world applications. As the manufacturer of ABS RAA36185118, I have watched the ways our product leaves the plant and finds its place in critical molds, industrial housings, and automotive trims. Clients from all sides of the industry ask about reliability and workability, not just for today’s run but for multi-year projects and demanding timelines. I’ve spent countless hours with our technical teams tracking polymer feedstock composition, confirming dispersion quality, and tuning process conditions to match the nuances requested by fabricators.
ABS RAA36185118 has grown out of those conversations. Our engineers listened to the questions and problems shared by major appliance makers, automotive suppliers, and electrical enclosure firms dealing with traditional general-purpose ABS. Injection molders constantly pursue cycle time reductions and surface finish improvements, often frustrated when standard resins show warpage, weld line weakness, or microvoids that undermine final part strength. The formula for this grade was developed to meet these frustrations head-on, relying on decades of accumulated knowledge—the only way to keep up in a rapidly shifting market.
The RAA36185118 model stands on a backbone of high-impact resistance and dimensional control. Chemically, acrylonitrile brings heat stability and chemical resilience, helping the product endure under vibration and exposure. Butadiene, on the other hand, forms the rubbery phase that delivers real toughness, allowing plastic parts to flex under shock rather than shatter. Styrene ensures gloss and processability, so fabricators can hit demanding flow targets without losing out on the look their customers expect. The interplay between these three monomers draws on a lot of process control, especially during the emulsion grafting that persists as the most reliable route for controlling particle size in our sector.
Each production batch for RAA36185118 gets tested with full melt flow indexing, ensuring that the viscosity window stays tight. For anyone standing by the extruder, a steady flow rate isn’t just a spec—it means faster runs and fewer downtime headaches. Color stability throughout cycles comes from process optimization we’ve developed on the line, not from textbook promises. Even minor pigment loads distribute evenly, which real-world operators notice most after multiple heating cycles. The final resin delivers a clean, balanced ivory tone, with minimal yellowing after exposure to moderate light and heat—something that continues to catch the attention of consumer goods designers who hate inconsistent lot-to-lot color shifts.
In our own plant, I have walked shipments of RAA36185118 onto trucks headed for a range of uses, from pressure-resistant plumbing fixtures to the decorative bezels that frame car interiors. Each end user brings their own pain points. Automotive suppliers who get our resin often stress over which ABS grade will handle the long-term UV exposure near window glass, as well as the impact loads from an occasional dropped part on the assembly line. RAA36185118 answers such requirements by balancing toughness and environmental resistance, with real-world test data showing single-digit differences in impact strength retention across multiple climate zones.
Electronic enclosure manufacturers, especially those aiming for the North American market, have always struggled with legacy grades of ABS that can become brittle in cooler shipping months. Our team paid close attention to low-temperature performance metrics, focusing on the -20°C notch impact results, because shipments to Canada and Northern Europe can’t afford part breakage during transit. As a result, feedback from molders shows a visible reduction in scrap rates due to cold-weather failures when using our grade. This outcome isn’t a lucky break—it’s rooted in our continuous post-production monitoring and feedback loops with top-tier clients.
ABS isn’t all the same. Differences between models come down to more than just test data—they show up on the production line when actual run conditions push polymers past their theoretical limits. Over the years, our RAA36185118 grade has shown fewer issues with sink marks on thick-walled parts, which is a headache for manufacturers making durable handset enclosures or tool housings. To reach this, we tuned the rubber dispersion to create a stable microstructure, reducing internal stresses that lead to visible surface issues after cooling.
Fire safety is another question rarely addressed thoroughly by basic ABS grades. We prioritize flame retardancy not just by adding standard FR agents, but by taking a careful approach to halogen-free options that support both public health and regulatory requirements in Europe and beyond. Our formulation for RAA36185118 achieves repeatable results on UL94 HB ratings in the standard thickness range of 1.5 to 3.0 mm. I’ve watched dozens of lab burn tests where consistent, self-extinguishing performance has spared clients significant time on approval cycles and reduced surprise recalls.
Paintability and plating qualities also matter on the shop floor. The chemistry behind RAA36185118 results in a surface that handles vacuum metallization and waterborne paint systems with fewer pinholes or adhesion problems. This benefit has attracted interest from consumer goods manufacturers eager to win aesthetic markets with metallic and custom color finishes. Our lab teams routinely monitor peel strength and gloss retention, and clients regularly send back reports showing defect rates falling below the industry average. The difference comes from strict quality control upstream of compounding, and by maintaining resin purity above 99%.
Sitting with process engineers on client visits, I repeatedly hear that operational hiccups can derail even the best raw materials. RAA36185118 streamlines mold filling, requiring less machine adjustment and providing a broader processing window. The melt flow rate, measured consistently around 20 g/10min in our lab settings, correlates to easy cavity fill even in complex multi-gated molds. In practice, this means less time spent tweaking temperatures and less resin lost in the form of off-spec scrap.
Cycle time always lies at the heart of a thermoplastic’s value. Our plant monitors every extrusion and molding lot’s cooling curve, ensuring that parts can be demolded rapidly but with limited shrinkage variation. The shrinkage performance in the main flow and transverse directions remains balanced thanks to our control over butadiene rubber content, translating into a reduction of post-mold warpage in the high-volume applications like refrigerator liners and computer monitor housings.
The granule form supplied to clients supports automated conveying systems. Material sits cleanly in hoppers without tendency to bridge or generate dust, reducing filter clogging and machine downtime. Each delivery gets tested for bulk density and fines content, since downstream users care that their raw polymer won’t trigger cleaning cycles in closed feeding systems, especially for 24-hour operations. The details matter—clients have shared success stories where switching to our resin helped them raise throughput by over 7% compared to their previous general-purpose ABS sources.
Industry demands for sustainable materials keep growing. Many of our clients bring requests for recycled content, hoping to build supply chains that can show not just performance but also environmental credentials. With RAA36185118, our plant has invested in integrating controlled percentages of high-purity post-industrial recycled streams, subject to the same mechanical property checks as virgin feedstock. Our R&D teams follow progress on closed-loop recycling infrastructure, working closely with local partners to enhance life-cycle traceability and support product stewardship initiatives.
Waste reduction at our plant also plays a role. Granules that don’t meet our tight melt flow or impact resistance ranges are flagged before they enter the commercial supply chain, and diverted to secondary recovery systems rather than landfill. The energy footprint of RAA36185118 remains under active monitoring, allowing our teams to provide audited carbon impact data to key OEMs who ask for disclosure down to resin batch level.
Many companies offer ABS resin, but the differences show up when push comes to shove on the line. Our RAA36185118 model stands apart in several ways. Factory teams report reduced color drift and improved luster consistency, especially critical for appliances and display housings where visual flaws can reject a product, costing whole shifts of work. Lower VOC emissions during molding processes reflect the tight control we maintain over residual styrene monomer content, so health and safety teams report fewer troublesome machine odors—feedback echoed by operators running vents and covers inside enclosed shop environments.
In automotive and electronics, requirements don’t just end at mechanical property targets. Vibration and shock testing push the resin’s real impact strength—notched and unnotched—to the limit. Clients working under strict directives for global sourcing have pushed us to raise our game on full traceability, batch by batch, with molecular fingerprinting that allows forensic assurance of origin and formulation. I have personally overseen audits where independent labs traced physical and chemical profiles of our product to confirm product identity and purity against regulatory and customer requirements. This is not a luxury—global recalls and tracebacks happen, and the only sustainable path means showing full control over your production network.
Handling stability and chemical resistance come into sharper relief across product cycles. In medical device housing production, for instance, where frequent cleaning cycles use aggressive disinfectants, ordinary ABS quickly loses surface gloss and starts to microcrack. By focusing on the right acrylonitrile ratio, RAA36185118 holds up against sanitizing agents and even moderate solvent wipes, putting fewer critical components at risk.
Heat resistance and low deformation under moderate loads mark another sharp difference from general ABS grades. On the floor, parts molded with RAA36185118 emerge from thermal cycling chambers with lower dimensional change, reducing the need for costly secondary machining or rework. I have reviewed parts sent back from field tests across multiple climates, with parts in automotive dashboards and HVAC ducting keeping their shape and mechanical response within the tight tolerances specified at the design stage.
Then there’s long-term property retention. The physical balances designed into RAA36185118 come from thorough aging tests, both accelerated and in natural conditions. Repeated cycles of exposure to humidity, heat, and ultraviolet light form the backbone of our QC regime. Final parts made from our resin exhibit slower mechanical decline compared to legacy grades, a difference that means lower warranty claims for white goods and electronic equipment manufacturers down the road.
Over years of technical service visits, I’ve seen firsthand how product tweaks become real solutions. For one client in the furniture market, the switch to RAA36185118 halved their incidence of surface cracking at attachment points, traced back to improved stress-cracking resistance stemming from our butadiene dispersion protocol. In another case, a buyer in the power tools sector flagged warping on large housings as a manual rework bottleneck. By working together on molding trials using our grade, the client reduced rework hours and saved significant material cost by dropping defect rates under 2%.
Feedback from OEMs often highlights how RAA36185118’s balanced blend helps them standardize on a single resin grade for multiple product lines, reducing storage SKUs and simplifying line changeovers. The material’s consistent pellet morphology and low static buildup also mean faster switchovers and less carryover contamination inside large automated plants. Batch-to-batch reproducibility, audited internally and externally, scales up these process improvements, turning one product’s stability into annual cost savings spread across thousands of tons of resin.
As a manufacturer, I see daily how close technical service, genuine transparency, and direct feedback cycles feed into each other. Formulation changes aren’t undertaken on a whim—we respond to challenges that arise from genuine user experience, and adapt process parameters so they deliver more than just laboratory specifications. This approach sets the RAA36185118 model apart from commodity resins—each lot leaving our site comes stamped with a history of adjustment, customer dialog, and performance validation.
Making ABS is more than just stirring chemicals in a tank. From the first stage of emulsion polymerization to the final sealing of outbound bags, every step affects how well the finished resin works in the real world. The RAA36185118 model is the sum of iterative improvements, hands-on feedback, and daily problem solving born from our long experience as a dedicated ABS manufacturer. Our pursuit of tighter mechanical tolerances, color accuracy, improved environmental performance, and downstream compatibility reflects the needs and demands of the industries we serve. Every shipment carries not just a product, but the commitment of a team who stand behind it, tracking results from shop floor to finished goods and back again.