LG Chem, Ltd

Products

Acrylonitrile-Butadiene-Styrene (ABS) PRSABS0064

    • Product Name: Acrylonitrile-Butadiene-Styrene (ABS) PRSABS0064
    • Chemical Name (IUPAC): Polybutadiene-co-acrylonitrile-co-styrene
    • CAS No.: 9003-56-9
    • Chemical Formula: (C8H8)x·(C4H6)y·(C3H3N)z
    • Form/Physical State: Solid
    • Factroy Site:
    • Price Inquiry: sales6@ascent-chem.com
    • Manufacturer: LG Chem, Ltd
    • CONTACT NOW
    VTB
    Specifications
    HS Code 105964
    Product Name Acrylonitrile-Butadiene-Styrene (ABS) PRSABS0064
    Polymer Type Thermoplastic
    Appearance Opaque
    Density G Cm3 1.04
    Melt Flow Index G 10min 15
    Tensile Strength Mpa 44
    Flexural Modulus Mpa 2150
    Impact Strength Charpy Kj M2 18
    Heat Deflection Temperature C 88
    Hardness R Scale 106
    Vicat Softening Temperature C 97
    Color Natural
    Processing Method Injection Molding

    As an accredited Acrylonitrile-Butadiene-Styrene (ABS) PRSABS0064 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing The packaging for Acrylonitrile-Butadiene-Styrene (ABS) PRSABS0064 is a 25 kg net weight, industrial-grade, sealed polyethylene bag.
    Container Loading (20′ FCL) 20′ FCL loads approximately **25 MT ABS PRSABS0064** in 25 kg bags, palletized or non-palletized, ensuring secure transportation.
    Shipping The chemical Acrylonitrile-Butadiene-Styrene (ABS) PRSABS0064 is shipped in secure, sealed containers to prevent contamination and exposure. Packages are clearly labeled according to regulatory standards. Shipments are transported via approved carriers, ensuring temperature control and protection from moisture and physical damage throughout transit. All handling complies with safety guidelines.
    Storage Acrylonitrile-Butadiene-Styrene (ABS) PRSABS0064 should be stored in a cool, dry, and well-ventilated area away from direct sunlight, heat sources, and incompatible materials such as strong acids or oxidizers. Keep the product in tightly sealed, labeled containers to prevent contamination and moisture absorption. Practice good housekeeping to avoid dust accumulation, and follow all relevant safety guidelines and local regulations.
    Shelf Life The shelf life of Acrylonitrile-Butadiene-Styrene (ABS) PRSABS0064 is typically 2 years if stored in cool, dry conditions.
    Application of Acrylonitrile-Butadiene-Styrene (ABS) PRSABS0064

    Applications of Acrylonitrile-Butadiene-Styrene (ABS) PRSABS0064 in Industrial Manufacturing

    As the original manufacturer of ABS PRSABS0064, we focus on supplying material grades meeting specialized downstream demands across several high-reliability sectors. Below, we detail major industry applications based strictly on field-validated use, with attention to formulation integration, compliance benchmarks, and manufacturing specifics.

    1. Automotive Interior Components

    Manufacturers in the automotive sector widely specify this ABS for instrument panels, dashboard trims, and console elements that require high impact resistance and precise color matching. Applications demand not only mechanical durability under frequent temperature cycling but also exact conformity to emissions and flammability standards pertinent to passenger cabins. Formulators frequently adjust content ratio to meet drawability in mold design and to optimize the balance between rigidity and flowability for intricate part geometries. Our material typically enters as direct resin for injection molding lines, ensuring repeatable cycle times in medium to high-volume parts fabrication. Finished interior goods include vent grilles, under-dash panels, headliner frames, and pillar trims.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    2. Refrigeration Appliance Housings

    Producers of home and commercial refrigerators use ABS PRSABS0064 for inner and outer liners, taking advantage of its strong dimensional stability and natural resistance to low temperatures. The material’s suitability for direct food contact surfaces depends on the grade selection and strict testimony to migration and extractables limits. Process engineers calibrate ABS quantity according to wall thickness and design stiffness while maintaining efficient thermoforming or injection conditions. The resin integrates at the earliest stage post-compounding and passes through rigorous QC for gloss and adhesion to foamed polyurethane insulation. The resulting consumer goods show resilience through freeze-thaw cycles, ensuring a robust service life in daily kitchen or supermarket environments.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    3. Personal Electronic Device Enclosures

    Electronics brands rely on ABS PRSABS0064 for protective shells of tablets, monitors, set-top boxes, and similar devices demanding high surface quality with thick-wall impact strength. Stringent electrical and environmental safety marks drive precise formulation control, with antistatic or flame-retardant additives layered without degrading the color finish. The resin accommodates snap-fit joints or ultrasonic welding, making it ideal for automated downstream assembly. By dosing as the principal matrix in closed-loop injection molding, downstream fabricators maintain tight dimensional tolerances and visual uniformity even across complex part geometries. Final consumer products include enclosures for home electronics and various monitor casings.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    4. Plumbing Pipe Fittings and Valves

    Water system equipment producers depend on ABS PRSABS0064 to mold robust fittings, sleeves, and specialty connectors used in municipal and residential plumbing. These parts must endure pressure cycles and chemical exposure without cracking over long operating lives. Quality assurance teams routinely validate incoming resin lots against hydrostatic strength and chemical leach rates specific to potable water regulations. ABS charge level depends on joint complexity and must balance impact resistance with machinability, especially for solvent-weld or threaded fittings. Material introduction occurs directly in fully automated injection cells, synchronized with seal ring insertions for hybrid assembly lines. The field output includes specialty connectors, riser pipes, and pressure-rated fitting devices.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    5. Children’s Toy and Educational Product Casings

    Toy producers specify ABS PRSABS0064 for parts requiring non-toxicity, vivid color options, and resilient breakage resistance. Child safety standards impose stringent requirements on contaminants, meant to rule out migration of hazardous substances through repeated handling. Plants align additive levels to ensure compliance even under repeated sterilization and UV exposure cycles. Typical process steps include dosing high-purity ABS grades with food-safe pigments at the granulation stage, feeding these into precision molding for intricate blocks, action figures, and learning tablet bodies. Finished goods undergo comprehensive batch traceability for every resin delivery lot.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    Free Quote

    Competitive Acrylonitrile-Butadiene-Styrene (ABS) PRSABS0064 prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.

    We will respond to you as soon as possible.

    Tel: +8618018036652

    Email: sales6@ascent-chem.com

    Inquiry

    Get Free Quote of LG Chem, Ltd

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    Introducing ABS PRSABS0064: Meeting Real-World Demands in ABS Manufacturing

    A Closer Look at ABS PRSABS0064 From the Source

    We have spent decades refining our ABS production line, studying intricate details others might overlook. ABS PRSABS0064 stands out because we built it around what end-users in injection molding and extrusion truly demand, balancing a precise ratio of acrylonitrile, butadiene, and styrene to deliver both rigidity and resilience. Over countless production cycles, we’ve seen how slight tweaks in formulation shift the outcome for appliance casings, automotive panels, and a host of everyday molded goods. In our labs and on the plant floor, we monitor granule consistency and batch properties daily, dialing in molecular weights and impact strengths tied to the realities of your production lines. This model wasn’t just put together to satisfy a checklist; it took hands-on work beside equipment operators and feedback sessions with mold fabricators on what sticks, flows, and holds up through the stresses of daily use.

    What Sets This ABS Model Apart

    We take pride knowing PRSABS0064 serves industries where reliability matters more than brochure terms. Adding butadiene at a calibrated ratio gives it toughness you can see when parts flex but refuse to crack under pressure. The styrene phase brings out a high-gloss finish, especially important for anyone running large, visible panels or consumer appliances. Key differences come from the tight range in melt flow index and impact strength, which we’ve confirmed using both ASTM and ISO repeat tests: figures align batch after batch, supporting steady throughput on multi-cavity molds and fewer rejects for cosmetic or dimensional issues.

    From assembly technicians to shop foremen, teams prefer this grade for its combination of rigidity and processability. Pulling data from cross-plant test runs, we’ve found PRSABS0064 gives excellent dimensional stability without warping during cooling. Items produced keep their fit over time, meaning less field service and happier downstream clients. Mold release is clean, so cycle times stay tight and you won’t see sticking or buildup that eats away profits. Low gel count and a controlled particle size distribution minimize risk of black specs or fisheyes on surface finishes—an issue anyone running high-speed lines has worried over. You get colorability without extra pre-drying steps, and pigments disperse evenly, a win for keeping production on schedule.

    Built on Decades of Field Experience

    Some firms chase innovation for its own sake. Our process starts with talking to line leads and maintenance engineers who rely on ABS to keep machinery running and customer orders fulfilled. We have tracked how PRSABS0064 holds up after long exposure to fluctuating temperatures, repeated mechanical shocks, and extended UV light tests in accelerated weathering chambers. In actual use, parts molded from this grade come back with less microcracking and fewer surface deviations than parts from commodity-grade blends. We back up these results with in-house testing and test feedback from long-term partners. This commitment to real-world reliability informs every adjustment in granule sizing, additive package, and compounding schedule.

    Our history with custom ABS grades dates back to a period when import restrictions forced us to refine every step from emulsion polymerization to pellet formation. By maintaining strict controls and direct oversight during each shift, we prevent contamination or batch drift—a common headache for customers relying on remote or multi-sourced supply chains. We take pride in continuous improvement, reporting back on yield loss trends, dust generation, and waste rates to keep our own process honest.

    Specifications and Practical Working Properties

    PRSABS0064 comes engineered for injection and extrusion molding processes requiring controlled melt strength and stable flow rates. You notice the difference during set-up: granules feed consistently from hopper to barrel, avoiding bridging or uneven density that can ruin short shots. Processors working with fine-tolerance molds tell us they see reduced scrap rates and better joint welds using this grade. With a Vicat softening temperature made for demanding under-hood, consumer device, or refrigeration applications, we don’t see softening or sag until higher stress points, so finished parts keep their form where lesser materials deform. Melt flow sits in a range that plays well with both fast-cycle robots and older hydraulic presses. With tensile strength tailored to resist snapping at thin ribbing or deep draws, PRSABS0064 ensures molded components meet load-bearing and aesthetic requirements in one run.

    We avoid cheap filler or reground streams that might push the price tag down for a single quarter but show up as downstream product failures. Every lot is tested for impact resistance, environmental stress crack resistance, and chemical compatibility with the mounting or adhesive systems common in electronics, automotive, and household fixture assembly. Whether it is noise in appearance or the need for a specific color match, we stay flexible by aligning pigment carrier and resin base so undertones don’t shift during compounding. Feedback cycles from long-term clients shape our spec sheets more than isolated lab tests or isolated pilot runs.

    Serving Customers Who Build to Last

    You notice certain themes from production partners who stick with PRSABS0064 over years: clear focus on quality, predictable performance on the line, and low maintenance between tool changes. Multiple users report reductions in tooling wear and less downtime chasing surface defects; shops running both automated and manual processes say operator training becomes simpler when resin flow and shrinkage behave as expected from one delivery to the next. It makes sense: we track these metrics through internal audits and external review, not just our own word, with transparent records of property variance between lots.

    End-users report satisfaction not only in part strength but also in how post-molded components bond or mate across assembled substructures. Pullout force and torque retention stay in the optimal window, even under real-world cycles of temperature swing or compression. From car vent louvers to appliance faceplates or power tool housings, field parts molded from PRSABS0064 demonstrate a balance: enough surface hardness to resist scratches and scuffs, enough flex to handle drop tests, and ample aesthetic clarity without streaks or blushing. We have worked closely with customers to ensure their specialized additive packages—whether UV stabilizers, flame retardants, or antistatic agents—blend smoothly into base resin, side-stepping issues of delamination or phase separation.

    Comparison With Other ABS Grades and Alternatives

    Plenty of ABS grades promise universal fit, yet universal products often sacrifice stability or crucial performance points. PRSABS0064 targets high-throughput applications where tight property control matters more than carrying the lowest commodity price. Compared against generic blends, it resists whitening on bending, sustains higher drop impact, and holds gloss even under long-term light exposure. Users working with paints or film lamination processes find that surface energy and finish consistency reduce prep or rework cycles.

    Some clients have compared PRSABS0064 to high-impact polystyrene or PC/ABS hybrids but returned to this ABS for its superior thermal resistance and lower shrinkage. Others have trialed imported off-brand ABS, only to confront variable lot performance—especially striking during mass production runs. The tighter spec and hands-on batch control we maintain guarantee each delivery mirrors the previous one, saving customers the hidden costs embedded in unscheduled shutdowns or unpredictable scrap. We have supported long-term industrial partnerships specifically because our product's mechanical consistency has meant lower total system cost, even if up-front pricing occasionally runs above bottom-shelf resins.

    Opportunities to substitute other commercial ABS grades do arise, particularly with global supply disruptions. Key factors tip the scales toward PRSABS0064: we offer traceable formulation records and immediate technical support from experienced personnel who understand the process end-to-end. Fewer surprises arise in cooling curves or gloss level from part to part. We have documented examples where switching grades caused dimensional drift, assembly failures, or downstream warranty claims—not so with our approach.

    Challenges in Manufacturing and How We Handle Them

    Consistency in batch-to-batch output seldom comes easy. Resin production involves balancing minor ingredient fluctuations, compounding temperatures, and shift-to-shift equipment calibration. We tackle these hurdles by putting experienced operators on our lines, supplementing automated gauges with human skill developed over years. Our teams calibrate extruders at the start of every run and audit random samples straight from the pack-out silos, not just from lab-prepped runs. By collaborating directly with equipment technicians at customer facilities, we can troubleshoot performance issues on the spot—solving nozzle sticking, color streaks, or cycle slowdowns without leaving clients waiting for solutions. Practical fixes like sieve checks, screw design tweaks, or mold venting have come from open channels with shop floor teams, not abstract technical manuals.

    Material feedstock volatility isn’t a simple problem to solve, particularly with upstream disruptions in butadiene or acrylonitrile supply. We hedge such risks by sourcing partners who maintain quality stockpiles and by employing cross-functional teams who understand the whole supply chain. Quick pivoting to alternative pathways or adjusting schedules during tight periods keeps our clients equipped and our plant running. We invest in periodic pilot scale trials with our suppliers so process changes upstream don’t surprise us downstream. Stable logistics, predictive inventory planning, and frequent forecasting meetings reinforce our ability to meet sudden surges in demand or supply blips.

    Our Commitment to Reliability and Partnership

    Nothing beats hearing from machinists, plant managers, and procurement leads who share honest outcomes—a clear test of whether our product solves real problems. Some call about process compatibility during new machine commissioning, others report how PRSABS0064 held up on crash testing or repetitive impact cycles. Whether the question comes from high-output automotive molders or smaller tool shops, we handle every concern with the seriousness it deserves, drawing from both technical documentation and lived factory experience.

    Customer visits to our facility are open. Seeing the actual compounding, extrusion, and quality testing builds trust because it opens the black box of resin manufacturing. We take pride in realtime transparency: property tables posted on shop floor monitors, batch tracking sheets accessible to our teams, and regular customer reports. Deliveries get accompanied by full traceability logs and detailed grade attributes; this helps both new users and veterans avoid surprises.

    The value of running a vertically integrated ABS operation shows in little details. Operators who catch subtle shifts in rheology, blending teams who adjust color backs in real time, and engineering support that answers mold flow questions—all help our customers achieve best-in-class rates of OK parts on first pass. Onsite technical visits promote knowledge sharing; sometimes a small tip about barrel temperature or vent size makes the difference between all-day downtime and a smooth afternoon run. Our field engineers capture lessons learned and feed them back into every step, from product design to delivery checks.

    Shaping the Future of ABS Manufacturing—Responsibly

    ABS remains a mainstay material by bridging structural needs with attractive finishes, yet environmental and safety expectations keep rising. We track incoming regulation, shifting away from legacy stabilizers or pigments toward RoHS and REACH compliance long before deadlines hit. Our in-plant teams train on responsible material handling and waste reduction, aiming for resource efficiency and responsible disposal. We tailor energy usage tracking and solvent recovery systems based on feedback from regular environmental audits.

    PRSABS0064 benefits from these continuous improvements. We have moved to closed-loop water cooling, adopted energy-efficient extrusion parameters, and upgraded dust handling to reduce both emissions and health risks for our crews. Ninety percent of rinse water now recycles internally, shrinking our local footprint and offering customers the assurance of responsible sourcing. Multiple OEMs report reduced risk assessments and easier compliance documentation when specifying our resin. Holding ourselves to high standards benefits end-users and the broader community alike.

    Closing the Loop With Practical Training and Local Support

    Many of our team members have come up from line operator roles; their working hands and sharp eyes help strengthen both process and training for partners. We run regular workshops and site visits at customer facilities to review molding practices, troubleshoot root causes, and share updates about upcoming regulatory or technical shifts. Installations of new equipment or changes in molding hardware see us arriving on short notice with field kits and hands-on problem-solving, not just instructions delivered over email.

    Knowledge is most useful when it gets shared clearly. Rather than issuing complicated technical charts and leaving users to interpret, we offer clear, context-rich guidance for plant technicians. Direct phone access to our specialists means faster fixes, shorter downtime, and a sense of security for operators who face real pressure from production targets. Customers report longer tooling lifespans and higher first-pass yield after adopting practices refined alongside our material.

    Supporting material transitions, such as switching from older ABS models or moving from other polymers, involves real risks. We handle these changes with visits, testing, and close monitoring—for color matching, dimensional holding, and tool compatibility. Our aim isn’t just to gain a sale; we build long-term working relationships marked by open data sharing and problem-solving.

    Looking Forward: Trusted ABS for an Evolving Market

    With ABS PRSABS0064, our focus stays grounded in the practical: predictability, service support, and continual process improvements rooted in field experience. We don’t rest on established processes alone. Our teams experiment with additive enhancements, trial new pigment blends, and monitor advances in equipment to ensure we deliver value quietly, batch after batch. Each step in formulation, testing, and delivery draws upon shared expertise and long-term collaboration with customers who make products meant to last.

    We treat every order as an extension of our factory’s promise. People who build depend on resin that works under pressure without unnecessary surprises or silent shortcuts in production. PRSABS0064 has earned its place in tool shops, molding lines, and assembly plants because it keeps commitments in the real world, not just in a lab. End-users have seen that difference; we’d stake our reputation on it.