LG Chem, Ltd

Products

Acrylonitrile-Butadiene-Styrene (ABS) MP220

    • Product Name: Acrylonitrile-Butadiene-Styrene (ABS) MP220
    • Chemical Name (IUPAC): Poly[(1-cyano-1-methylethene)-co-buta-1,3-diene-co-ethenylbenzene]
    • CAS No.: 9003-56-9
    • Chemical Formula: (C₈H₈·C₄H₆·C₃H₃N)ₙ
    • Form/Physical State: Solid Granules
    • Factroy Site:
    • Price Inquiry: sales6@ascent-chem.com
    • Manufacturer: LG Chem, Ltd
    • CONTACT NOW
    VTB
    Specifications
    HS Code 102724
    Material Name Acrylonitrile-Butadiene-Styrene (ABS) MP220
    Density G Cm3 1.04
    Melt Flow Index G 10min 20
    Glass Transition Temperature C 105
    Tensile Strength Mpa 41
    Elongation At Break Percent 25
    Flexural Modulus Mpa 2100
    Impact Strength Charpy Kj M2 18
    Hardness Rockwell R108
    Printing Temperature C 220-250
    Bed Temperature C 80-110

    As an accredited Acrylonitrile-Butadiene-Styrene (ABS) MP220 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing ABS MP220 is packaged in a 25 kg moisture-resistant, sealed bag with clear labeling for product identification and safe handling instructions.
    Container Loading (20′ FCL) 20′ FCL can load about 16 metric tons of Acrylonitrile-Butadiene-Styrene (ABS) MP220, typically packed in 25 kg bags or jumbo bags.
    Shipping Acrylonitrile-Butadiene-Styrene (ABS) MP220 is shipped in sealed, moisture-resistant packaging to protect against contamination and degradation. Standard package sizes include 25 kg bags or bulk containers, labeled with product and safety information. Store and transport in cool, dry conditions, avoiding exposure to direct sunlight, heat, and sources of ignition.
    Storage Acrylonitrile-Butadiene-Styrene (ABS) MP220 should be stored in a cool, dry, and well-ventilated area, away from direct sunlight and sources of heat or ignition. Keep the material in tightly sealed containers to prevent contamination and moisture absorption. Avoid storing near strong acids, bases, and oxidizing agents. Ensure proper labeling and maintain strict inventory control to minimize degradation.
    Shelf Life Acrylonitrile-Butadiene-Styrene (ABS) MP220 typically has a shelf life of 1–2 years if stored in cool, dry conditions.
    Application of Acrylonitrile-Butadiene-Styrene (ABS) MP220

    Applications of Acrylonitrile-Butadiene-Styrene (ABS) MP220 in Industrial Manufacturing

    ABS MP220 offers a balance of impact strength, surface quality, and processability, making it a preferred raw material in multiple advanced manufacturing sectors. As the actual manufacturer, we support downstream partners with fully traceable batches engineered for critical industrial demands. The following applications reflect established sectors where ABS MP220 provides proven technical value.

    1. Automotive Interior and Exterior Components

    Tier-1 automotive suppliers specify ABS MP220 for both aesthetic and structural parts, such as instrument panel housings, pillar trims, grilles, mirror covers, and wheel covers. The material enters injection molding lines where its balanced flow, excellent dimensional control, and paintability reduce cycle times and secondary finishing costs. In high-visibility parts, color matching and surface gloss stability remain critical, and all resin batches must pass UV aging and emission restrictions for use inside vehicle passenger compartments.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    2. Home Appliance Housings and Structural Parts

    Leading appliance makers use ABS MP220 to deliver crisp surface finishes and enhanced mechanical integrity in visible and load-bearing housings. High-volume OEMs demand a resin grade capable of withstanding repeat assembly stresses and frequent surface cleaning cycles in end-user environments. The material’s compatibility with chroming processes also enables high-gloss decorative features in premium home appliances.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    3. Consumer Electronics Enclosures

    Producers of electronics rely on ABS MP220 for its dielectric properties and dimensional stability in producing precision-molded casings. Device OEMs require strict uniformity to meet tight tolerance specifications, especially for assembly with circuit boards and connector interfaces. Surface quality must support laser marking, pad printing, and smooth touch finishes without pre-treatment. RoHS conformity and batch-level traceability remain mandatory throughout electronics supply chains.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    4. Medical Device Housings (Non-Implantable)

    Medical equipment OEMs use ABS MP220 for external housings and panels in diagnostic, monitoring, and laboratory devices. Specifications prioritize chemical resistance to hospital disinfectants, resistance to mechanical shocks, and biocompatibility per ISO standards. Manufacturers demand full compliance documentation to support device registration and ensure traceability along regulated supply chains. Surface finishing must allow for consistent labeling and disinfection cycles without degradation.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    5. Toys and Educational Products

    Major toy brands and educational goods manufacturers select ABS MP220 for tactile, resilient, and color-stable end products. The resin supports intricate mold detailing and standing up to frequent play without cracking or discoloration, a key expectation in products for children. Applications in this segment face stringent toxicological review and mechanical safety assessments, with particular focus on migration of heavy metals and phthalates.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    Free Quote

    Competitive Acrylonitrile-Butadiene-Styrene (ABS) MP220 prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.

    We will respond to you as soon as possible.

    Tel: +8618018036652

    Email: sales6@ascent-chem.com

    Inquiry

    Get Free Quote of LG Chem, Ltd

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    Acrylonitrile-Butadiene-Styrene MP220: A Closer Look from the Factory Floor

    Built by Experience, Tuned for Demanding Applications

    In our line of work, every product reflects a journey through decades of hands-on process improvement, feedback from actual users, and countless trials pressed into the daily grind of material manufacturing. Acrylonitrile-Butadiene-Styrene (ABS) MP220 stands out in our catalog because of the unique way it evolved from one generation of user requirements to the next. We have fine-tuned this resin from the ground up by running countless batches, observing how each subtle input change resounds across the downstream molding and final product lifecycle. No matter how glossy the brochure, the essence of ABS shows up at the intersection where process efficiency and part durability meet real production needs.

    Why This Grade Exists

    The story behind MP220 began after feedback from longstanding customers revealed frustrations with unpredictable flow, excessive warpage, or brittleness under repeated stress. Industries demanded a resin that keeps pace with continuous production lines and matches expectations for high mechanical performance. Unlike generic grades, MP220 addresses the daily reality inside a molding shop. The compound runs clean, shows reliable melt flow across the range most often used by injection molders, and supports repeatable cycle times. Unlike many higher-flow or specialty grades, MP220 does not sacrifice impact strength or introduce unwelcome color shifts over successive runs.

    Real-World Specifications, Proven in the Field

    While data sheets tick off the numbers—melt flow index, Vicat softening temperature, tensile and impact ratings—years of working with molders and fabricators have shaped those specs into something customers recognize as consistent behavior, not just abstract measures. MP220 typically features a melt flow index that slots it comfortably in the range favored by automatic injection equipment making mid-sized, medium-wall parts. Mechanical properties balance rigidity and elongation. This resin handles the kinds of mechanical shock and temperature swings expected in, for example, appliance housings, interior automotive parts, consumer electronics, and tool bodies. Its stability under thermal load gives part designers more confidence, especially if parts cycle through temperature variations in real use.

    Differences from Commodity ABS

    Compared to what many refer to as “commodity” ABS, MP220 emerged from deliberate tweaks in butadiene content and polymer backbone adjustments. This translates to higher impact resistance, tighter color stability, and improved gloss retention after extended cycle testing. Often in commodity materials, batch-to-batch variability leads to unpredictable molding outcomes—surface streaks, brittle cut edges, or warpage that only shows up after a shipment leaves the dock. We have invested in process automation and near-line compounding adjustments that keep those variables in check. The masterbatch approach and rigorous quality gate measures reduce the “surprise factor” in large runs. In the end, many of our customers notice fewer rejected parts, steadier color from lot to lot, and less time spent troubleshooting on the line.

    Navigating the Application Landscape

    It’s not one single property that makes a versatile resin for tough markets. Assemblers of vacuum cleaner housings rely on a tough outer shell that looks the same after hours in sunlight or exposure to kitchen chemicals. Producers in office equipment, printers, and POS devices need dimensional accuracy in complex assemblies. The consumer appliance market values deep color and gloss choices—often demanding custom color matching, which comes easier with MP220’s stable base tone. Customers building enclosures for low to medium voltage electronics appreciate the reliable insulation properties and insurance against spontaneous cracking at assembly. Our formulation team works closely with end users who run multipurpose lines, often with short lead times for tooling changeovers; for them, a resin that can be counted on to fill detailed molds cleanly, release easily, and cool with minimal distortion pays dividends in productivity.

    Learned Lessons from Actual Production Runs

    Certain conversations stand out from years at the plant and repeated visits to customer sites. Take a mid-size supplier fabricating automotive interior components—the cost of a batch lost to sag, swirl, or color drift is measured not just in output, but in delayed shipments and lost trust. By sitting alongside their process engineers, we’ve dialed in MP220’s pigment compatibility and ensured pigment dispersion is fine enough to eliminate most visible defects, even in light colors or metallic tones. Early on, processor feedback highlighted issues when switching between utility and performance ABS without proper machine purging; our approach minimizes cross-contamination, cutting the time and scrap these changeovers historically generated.

    For another customer group—makers of DIY tools and electrical casings—a robust resistance to mechanical abuse means fewer warranty claims. In lab stress tests, MP220’s mix of acrylonitrile and butadiene helped absorb repeated impacts that would split more brittle compounds. We track performance on real-world applications through a product development partnership that sends samples into customers’ actual assemblies before full-rate production kicks in. This feedback, drawn from field returns and first-out-of-tool inspections, informs every incremental improvement in the resin.

    Consistency is a Choice, Built from the Inside

    Maintaining the quality standards our clients expect from MP220 takes more than just good formulations. We have invested in advanced mixing and monitoring systems that allow rapid on-the-fly adjustment of key input variables—including precise dosing of flame retardants or heat stabilizers when demanded by downstream requirements. Continuous feedback from both plant-floor sensors and off-line analytical labs means that every lot shares the same fingerprint. This investment pays off by giving processors the confidence to move rapidly from prototyping to full-scale runs without risking part property drift.

    Beyond machinery, experienced technicians provide the eyes and judgment that no sensor or digital dashboard can entirely replace. Regular cross-checks against customer parts, not just in laboratory conditions but in operational contexts, underline whether a seemingly minor setting change in compounding has a downstream impact on assembly yield or post-processing steps like painting, welding, or hot stamping.

    Supporting Modern Sustainability Demands

    The production of MP220 adapts to increasing calls for responsible sourcing and emissions reduction. Teams have streamlined process energy use, reduced off-gassing during pelletization, and ramped-up recycling of start-up and edge trim. Where customers ask for further improvements—for instance, closed-loop recycling or confirmed post-consumer resin content—our facility can integrate external recycled streams with batch-level traceability, without noticeable drops in surface finish or mechanical behavior. Factories aiming for green labels on finished products consistently push us to test bio-fillers and waste-derived feedstocks. Experience shows such additives can change the way the resin behaves, so our policy stays rooted in full-disclosure testing and transparent performance data, rather than wishful thinking or unproven claims.

    Pairing with Modern Fabrication Techniques

    Most manufacturers today don’t operate in isolation. Tooling for parts grows ever more complex, rapid prototyping strategies demand resin with predictable flow, and robotics speed up pick-and-place cycles. MP220’s flow properties find a sweet spot that works for both traditional injection presses and state-of-the-art machines with servo-driven controls. Regular feedback loops with robotics integrators help us tweak pellet conditioning to reduce dusting, clumping, or static buildup—small factors that can cause trouble in high-volume pick-and-place lines. We’ve also seen new demands for food-contact declaration, chemical-resistance certificates, and comprehensive migration testing—especially for parts in household appliances that touch consumables. Our dedicated technical support team maintains current certification files and can dig up detailed test results the moment a process engineer asks for reassurance about compliance or performance in harsh use scenarios.

    Maintaining Trust from OEMs Large and Small

    Original equipment manufacturers in fields from toys and fixtures to life-critical medical accessories look for more than just a supplier with certificates on the wall—they seek a working partner. Our relationships reach beyond the typical order fulfillment and follow-up emails. Long-term contracts often tie us directly into the customer’s new product launch cycle, with onsite consultation about molding strategy and process optimization. We’ve learned that even minor formulation tweaks ripple across regulatory review, color-matching runs, and secondary assembly. The difference between a successful product rollout and an expensive recall often turns on how well the material handles sustained cycles and tight dimensional targets. By tracking complaints, warranty returns, and performance data, we have continually raised the bar on quality and reliability.

    Listening to End-User Challenges and Offering Solutions

    Some of the hardest problems start on the factory floor, not in the lab. Mold technicians juggling changing humidity or fluctuating line speeds need quick answers, not pages of technical jargon. Years spent troubleshooting over the phone, or at customer sites, have distilled our technical support approach into a blend of lived experience and scientific rigor. In many cases, getting to the root cause of poor part finish or premature part failure comes down to familiarity with both the chemistry and the production equipment. Drawing on our firsthand experience with analogous customer setups, we walk line supervisors through checks for moisture content, machine screw RPM settings, or part ejection timing—using knowledge built from watching thousands of successful and failed runs.

    Over time, a pattern of shared knowledge and process notes shapes each new generation of product support. We keep detailed logs of every significant call, site visit, and molding trial involving MP220, feeding this intelligence back into raw material selection, compounding recipe tweaks, and machine setting guides. This history, coupled with ongoing investments in customer education and operator training, has helped many processors get better results with fewer interruptions, whether molding complex geometries or high-gloss exterior parts.

    The Real Value Beyond Data Sheets

    Numbers on a document will never tell the full story. Experience confirms that what matters most is reliability under pressure, speed of response from the manufacturing partner, and the flexibility to tweak material without jeopardizing supply chain continuity. MP220 has earned its place in our lineup not just for its inherent technical properties, but for a record of sweat-tested performance under daily production realities. We keep the lines open to listen, to adapt, and to keep every load running to spec—because at the end of the day, our job is measured by customer uptime, not just certificates or lab test signatures.

    Looking Ahead: The Ongoing Evolution of ABS

    Markets change fast, with new environmental pressures, regulatory changes, and evolving end-user tastes. Our team watches these currents closely, keeping in touch with key processors who routinely push the boundaries in part design, miniaturization, or sustainability. Each batch of MP220 is more than just a pile of pellets—it represents iterations based on tracked shipment outcomes, field failures, and success stories from the people building real things. As electric vehicles, smart devices, and connected home applications demand both performance and aesthetics, new requirements will keep us on our toes.

    Building a better resin never ends. Every year, our lab logs new variants—higher heat ratings for under-hood components, UV-resistant blends for outdoor gear, versions that slash volatile emissions for enclosed spaces. Not every trial makes it to commercialization, but the ones that do begin by listening to customers who work with their hands, troubleshoot on the production line, and know what counts most in a pressure-filled shift. The future promises further advances in recyclability, additive compatibility, and process integration, all grounded in the years of experience written into the MP220 series.

    Final Word from the Plant

    No technical datasheet or published review can express what constant collaboration with operators, engineers, and designers teaches us—all the small lessons about parting lines, tool wear, pigment migration, or how a plastic touch feels in someone’s hand. MP220’s place in the real world comes from this intersection of chemistry and manufacturing practicality. Through thousands of tons produced and shipped, from tooling trials to mass production, we stake our reputation on delivering resin that not only meets property targets on paper but delivers trusted results where it matters: on the line, in the mold, and in finished products that stand the test of use.