LG Chem, Ltd

Products

Acrylonitrile-Butadiene-Styrene (ABS) HI121M

    • Product Name: Acrylonitrile-Butadiene-Styrene (ABS) HI121M
    • Chemical Name (IUPAC): Poly[(1-cyano-1-methylethene)-co-(buta-1,3-diene)-co-(ethenylbenzene)]
    • CAS No.: 9003-56-9
    • Chemical Formula: (C8H8·C4H6·C3H3N)n
    • Form/Physical State: Pellets
    • Factroy Site:
    • Price Inquiry: sales6@ascent-chem.com
    • Manufacturer: LG Chem, Ltd
    • CONTACT NOW
    VTB
    Specifications
    HS Code 604512
    Product Name Acrylonitrile-Butadiene-Styrene (ABS) HI121M
    Manufacturer LG Chem
    Density 1.04 g/cm³
    Melt Flow Index 19 g/10 min (220°C/10kg)
    Tensile Strength 42 MPa
    Flexural Strength 68 MPa
    Izod Notched Impact 16 kJ/m² (23°C)
    Vicat Softening Point 98°C
    Molding Shrinkage 0.4-0.7%
    Hardness Rockwell R103
    Elongation At Break 35%
    Heat Deflection Temperature 88°C (at 0.45 MPa)

    As an accredited Acrylonitrile-Butadiene-Styrene (ABS) HI121M factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing A 25 kg bag of Acrylonitrile-Butadiene-Styrene (ABS) HI121M, packed in moisture-resistant, labeled industrial-grade white polyethylene sack.
    Container Loading (20′ FCL) A 20′ FCL container typically loads 25 metric tons of ABS HI121M resin, packed in 25 kg bags on pallets for export.
    Shipping ABS HI121M is shipped in 25 kg polyethylene-lined bags or bulk containers, securely sealed to prevent moisture and contamination. Packages should be stored in cool, dry, and well-ventilated areas, away from direct sunlight and ignition sources. Handle with care to avoid damage and ensure product quality upon arrival.
    Storage Acrylonitrile-Butadiene-Styrene (ABS) HI121M should be stored in a cool, dry, well-ventilated area, away from direct sunlight and sources of ignition. Keep containers tightly closed to prevent moisture absorption and contamination. Store away from strong oxidizing agents and extreme temperatures. Ensure the storage area is clean and suitable for plastics, maintaining ambient temperature and low humidity for optimal material stability.
    Shelf Life The shelf life of Acrylonitrile-Butadiene-Styrene (ABS) HI121M is typically 2 years under cool, dry storage conditions, avoiding sunlight.
    Application of Acrylonitrile-Butadiene-Styrene (ABS) HI121M

    Applications of Acrylonitrile-Butadiene-Styrene (ABS) HI121M in Industrial Manufacturing

    ABS HI121M serves as a specialized engineering thermoplastic in precision industrial manufacturing. With high impact resistance and stable processability, it meets downstream requirements across several focused sectors. Our production and formulation expertise align with strict regulatory environments as established by end-industry customers and compliance bodies.

    1. Automotive Interior Components

    Automotive OEMs select this grade for molded dashboard panels, pillar covers, glove boxes, and trim requiring consistently high impact strength and dimensional stability under fluctuating cabin temperatures. Our material supports direct injection molding with rapid cycle times. Formulation adjustments allow for specific UV resistance or heat stability, meeting key Tier 1 automotive contractor standards for color retention and aging. The component design stage determines additive package customization.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    2. Consumer Electronics Housings

    Electronics manufacturers depend on reliable ABS compounds for device enclosures demanding close dimensional tolerances and high-gloss or matte finishes. Material enters the value chain at the compounding step, incorporating antistatic or flame-retardant additives to secure compliance with international electrical safety codes. Cycle times and mold-release characteristics make it preferred for complex mold geometries across large production runs. Formulated batches are validated by full UL and RoHS screening.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    3. Home Appliance Structural Parts

    Major and small appliance OEMs specify this ABS grade for strong, lightweight housing shells and mechanical internal supports subject to cyclic loading and frequent handling. Material supports fast-cycle injection molding and maintains impact resistance through stress-relief annealing, which downstream clients rely upon during high-volume runs. Compliance with appliance safety and material purity requirements is validated batchwise before shipment.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    4. Medical Device Non-Critical Housings

    Medical device assemblers rely on high-impact ABS for structural, non-contact parts such as instrument casings and support frames. Formulations require strict compliance with biocompatibility, leachable substances, and easy sterilization by downstream users. The resin grade’s traceability and batch consistency support medical device quality management standards, especially for devices processed in controlled locations.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    5. Toys and Educational Products

    Large-scale toy manufacturers utilize high-impact ABS grades for structural parts and interactive components requiring long-term mechanical durability and proven color safety. In this sector, compliance with global material safety and migration standards for children’s products is a primary concern. Downstream processes involve batch-specific color matching and surface treatment to achieve high gloss or tactile finishes demanded by established brands.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    6. Plumbing and Sanitary Fittings

    Producers of plumbing fixtures and bathroom hardware deploy ABS for demanding parts exposed to varying temperatures, water, and household chemicals. Material engineers specify grades ensuring resistance to hydrolysis and chemical stress cracking, along with compliance for potable water contact during the part design stage. Post-mold finishing methods include plating and in-mold texturing depending on end use.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    Free Quote

    Competitive Acrylonitrile-Butadiene-Styrene (ABS) HI121M prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.

    We will respond to you as soon as possible.

    Tel: +8618018036652

    Email: sales6@ascent-chem.com

    Inquiry

    Get Free Quote of LG Chem, Ltd

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    ABS HI121M: Practical Performance Rooted in Manufacturing Experience

    Understanding HI121M’s Role in Modern Production

    Making Acrylonitrile-Butadiene-Styrene (ABS) for demanding applications, we see firsthand where properties end up making or breaking a process. Years at the production line have shaped our view on what separates one grade from another. HI121M was born from a need to tackle real-world molding challenges while supporting products that land in customers’ hands across industries.

    HI121M stands out with its high-impact toughness, molding consistency, and clean surface finish that manufacturers come to rely on. We developed this grade for use in everything from automotive trims and appliance housings to electronic device bodies – parts where daily knocks, scrapes, and drops should not send the finished product back to the repair bench. Performance expectations have changed over the past decade, and HI121M reflects that shift.

    Why Impact Strength Matters

    People reach for ABS in high-impact environments for a reason. Through extensive testing and day-to-day production monitoring, HI121M has delivered durable performance in both thin and thick-walled moldings. The chemistry isn’t an afterthought; we adjust the rubber content and distribution to reinforce the matrix without driving processing temperatures to extremes. The parts made from HI121M have weathered impact tests that flex cheaper blends until they fracture. It’s true—nothing escapes the temptation to cut corners, but repeated part returns from the field always cost more than investing in the right resin up front.

    Manufacturers need plastics that hold up across storage conditions, accidental drops, and stress cycles. We’ve run drop tests across standard ISO and ASTM methods, pushing HI121M parts up against similar models produced from lower-impact grades. The end-user rarely learns which chemical tweaks protect their washing machine panel or bumper trim, but that’s the manufacturer’s burden to bear. In these trials, HI121M consistently resists stress whitening and cracking, two problems that quickly surface in lesser resins after a cold warehouse fall or hasty transit mishap.

    Molding Consistency and Processability

    Injection molding never runs on theory alone. The most advanced grades with half-finished conversion stories rarely smooth out the headaches on a real plant floor. HI121M’s flow properties reflect a practical balance: we hit a melt flow rate that allows for strong surface finishes without requiring huge cycle time upgrades or constant parameter re-tuning between production runs. This results from persistent trials across dozens of machines, not just small pilot lots.

    For mid- to large-scale operations, colorability and process repeatability make all the difference. We receive feedback from molders about their warpage rates, gloss uniformity, and occasional streaking. Over time, improvements in HI121M’s stability have reduced trial-to-trial deviations and visible swirl marks that can mar cosmetic surfaces. Many of our longtime automotive and appliance clients value this, as today’s finishing lines only tolerate so many reworks before production goals start slipping.

    Surface Appearance – The Often-Missed Detail

    Our field visits to customer sites reveal a recurring frustration: a part can meet mechanical specs but falter in appearance. HI121M counters the tendency of high-impact ABS grades to sacrifice finish for toughness. The base resin chemistry, coupled with careful pellet sizing and tightly controlled batch processing, creates a smooth surface that holds gloss and color after painting or secondary finishing. As demand for visibly flawless exterior components grows, especially in consumer electronics, our clients use HI121M to avoid sanding, priming, and repainting steps that drive up labor costs.

    One frequent customer, an automotive interior supplier, relayed that switching to HI121M dropped their paint reject rate below 1%. They needed less primer and touch-up across multiple lines, saving both money and time on high-run dashboards and console parts. This kind of feedback signals what we’re most proud of in HI121M’s development: small differences in resin quality compound into major savings over a full production year.

    Comparisons with Commodity ABS Grades

    Commodity ABS often floods the market at prices manufacturers find hard to ignore. At the plant level, though, we notice that lower-cost grades trade off precisely those properties critical to finished goods survival. Sourcing agents might not see this until post-sale support calls spike or warranty costs climb. HI121M fills a gap for operations wanting sturdy toughness, stable processing, and finished part appeal—without the guesswork of using off-brand resin blends.

    We frequently run comparison lots through our own extrusion, molding, and vacuum forming equipment. HI121M reliably hits impact values up to 4–5 times higher than basic injection grades. Our team tracks process shrinkage, part ejection, and stress cracking in repeated high-volume cycles—none of which show the swings or weak spots seen with standard generic ABS. For multi-cavity tools, this consistency greatly lowers the percentage of scrap and ill-fitting assemblies.

    Raw material pricing remains a constant debate, but we’ve watched too many trial batches from offshore suppliers result in loads of off-spec parts that need costly workaround steps. HI121M, produced with rigorous batch controls and frequent QC checks, matches its published mechanical properties batch after batch, sparing manufacturers from delivery-day surprises.

    Performance Across Different Applications

    We work directly with partners producing appliance shells, automotive trim, luggage, and handheld device housings. Each industry demands something slightly different, but resilience against cracking, attractive finished surfaces, and fast, trouble-free molding always come up. For appliance majors, HI121M stands up to repeated temperature swings in dishwasher panels, where stress cracking can lead to water leaks or warping. Field monitoring shows these parts remain within dimensional tolerances even after months of usage cycles.

    In automotive settings, HI121M resists deformation under load and provides a tight, paint-receptive finish, boosting the perceived value of dash inserts, pillars, and exterior trims. Transported E&E components face the constant threat of drops and vibration. Our partners in the electronics market need color-stable, scratch-minimizing housings that last over years of use, and HI121M’s balance between toughness and surface retention checks these boxes.

    We’ve also seen HI121M excel in large, multi-shot molded cases and tool housings, where rapid cycling and complex gate arrangements can reveal any weakness in resin homogeneity or color dispersion. Consistent operator feedback suggests that HI121M’s predictable flow reduces gaps, short-shots, or weld line weaknesses compared to typical commodity blends.

    Sustainability, Safety, and Long-Term Supply

    As raw materials sourcing standards evolve, our customers ask pressing questions about sustainability and regulatory compliance. We source butadiene and acrylonitrile feedstocks with strict purity and process controls, ensuring HI121M meets restricted substance requirements relevant in consumer and industrial sectors. Quality systems control each stage of the resin’s journey, so neither suppliers nor downstream users are left untangling surprises from banned additives or trace contaminants.

    We’ve supported partners through multiple revisions of RoHS, REACH, and regional chemical safety standards common across Europe, North America, and Asia. HI121M routinely clears these hurdles, and batch traceability gives downstream manufacturers a straightforward compliance path. It’s increasingly common for procurement teams to request long-term declarations and technical support. Decades in the field have shown us that tracking accountability all the way through the supply chain benefits both manufacturers and their customers.

    Reliable delivery and inventory management count for just as much as technical specs. HI121M’s plant-level logistics support bulk shipments and high-frequency JIT orders alike. We structure our production schedules to match customer forecasts and respond to unexpected demand spikes with buffer stock—lessons learned from years spent untangling last-minute shortages. This lets assemblers and molders keep lines running through seasonal surges or supply disruptions, cutting the risk of unplanned standstills.

    Continuous Improvement in Response to Customer Feedback

    We believe ABS improvement doesn’t stop at hitting a published grade spec. Over the past decade, HI121M has seen steady tuning thanks to feedback loops between the manufacturing plant and customer floor. Each round of mold changeover or new colorant blend generates its own technical hitches. By keeping service teams on call and floors open to customer returns and suggestions, we’ve adapted HI121M’s formulation and pelletization to overcome recurring bottlenecks: clogged nozzles, color streaks, ejection resistance, or high scrap rates.

    Recently, a client running highly detailed vacuum-formed parts reported inconsistent trim lines due to slight flow differences. Our technical support worked side by side with their plant maintenance team, isolating the root cause to a subtle variance in pellet pre-drying. Small adjustments to HI121M’s moisture pick-up tolerance helped both operations stabilize, shrinking their overall waste and boosting yield. Real improvement happens at this level—minute tweaks for measurable plant-floor results.

    Our investment in pilot lines and customer trial support, including on-site troubleshooting and fresh batch testing for unusual molding issues, underlines a commitment to improvement. Every lot shipped contains lessons carried forward from years of trialing, feedback, and incremental upgrades. Factoring in workshop realities beats relying solely on test-lab claims. By keeping feedback honest and response times quick, we’ve seen HI121M outlast and outperform grades rushed out without the same testing rigor.

    Why Consistency Becomes a Competitive Edge

    Plastic components play a part in nearly every market segment. Consistency in resin properties matters the most when production uptime and brand reputation ride on finished goods reliability. We’ve tracked repair claim rates, warranty cycles, and scrap percentages with customers using HI121M for several consecutive years. Each time, production floor operators and QA teams credit consistent resin lots for reducing downtime, smoothing handoffs between molding and assembly, and simplifying production audits.

    Production bottlenecks often come down to unpredictability—a pellet lot that loses impact at one end, or a color batch that drifts just enough to kick a full run off the QA table. By honing HI121M’s process controls and material verification at the resin plant stage, we close gaps that show up as overtime hours or missed shipment deadlines further down the chain.

    We treat every user question (big or small) as an opportunity to remove snags in future batches. Sometimes it is a matter of tuning the pellet size distribution. Other times, feedback reveals a small but problematic handling issue at the customer’s hopper or dryer inlet. Long-term customers often share how switching to HI121M led to steadier downstream processes and simpler order planning, helping them tie fewer resources up in part rework or short-interval QC checks.

    HI121M and the Demands of Modern Manufacturing

    Shifts in global supply dynamics, higher production demands, and evolving product safety rules all mean resin grades need to keep pace with what the factory floor expects. HI121M grew out of the push for a practical ABS solution capable of taking daily punishment without imposing complex new handling or processing demands. Suppliers working day-in and day-out on automated lines, tight-tolerance assembly, or lean manufacturing setups have anchored our development roadmap.

    As end-use products increase in complexity, the materials feeding them cannot lag. Electronics housings, automotive cockpit modules, and home appliances all raise the bar for color stability, traceability, and post-mold durability. We work closely with engineers who fit parts into final assemblies and rely on HI121M's performance to avoid end-of-line failures or packaging losses. For many, a reliable, well-supported resin behind the scenes does far more than any short-term price reduction or untested commodity alternative.

    Long spans in manufacturing have driven home one constant: the right material, chosen and supported with real-world feedback, pays ongoing dividends in uptime, customer satisfaction, and warranty cost reduction. HI121M exists because our factory teams keep a practical focus, listening to the subtle cues from partners at every level of the production chain.

    ABS is found in more places than most realize, but the journey from raw pellets to finished consumer products always depends on details that show up under scrutiny. Our work remains centered on those details, with HI121M as a testament to the difference that practical manufacturing insight can make.