LG Chem, Ltd

Products

Acrylonitrile-Butadiene-Styrene (ABS) HF380LK

    • Product Name: Acrylonitrile-Butadiene-Styrene (ABS) HF380LK
    • Chemical Name (IUPAC): poly[(1-cyanoethylene)-co-buta-1,3-diene-co-ethenylbenzene]
    • CAS No.: 9003-56-9
    • Chemical Formula: (C8H8)x·(C4H6)y·(C3H3N)z
    • Form/Physical State: Pellets
    • Factroy Site:
    • Price Inquiry: sales6@ascent-chem.com
    • Manufacturer: LG Chem, Ltd
    • CONTACT NOW
    VTB
    Specifications
    HS Code 660701
    Material Acrylonitrile-Butadiene-Styrene (ABS)
    Grade HF380LK
    Melt Flow Index Mfi 43 g/10min (220°C/10kg)
    Density 1.04 g/cm³
    Tensile Strength 44 MPa
    Flexural Modulus 2100 MPa
    Izod Impact Strength 18 kJ/m²
    Vicat Softening Point 98°C
    Molding Temperature 200-250°C
    Color Natural
    Application Injection Molding
    Shrinkage 0.4-0.7 %

    As an accredited Acrylonitrile-Butadiene-Styrene (ABS) HF380LK factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing ABS HF380LK is packaged in 25 kg moisture-resistant, multi-layered polyethylene bags, clearly labeled with product and safety information.
    Container Loading (20′ FCL) Container Loading (20' FCL) for Acrylonitrile-Butadiene-Styrene (ABS) HF380LK: typically 16-20 metric tons packed in 25kg bags on pallets.
    Shipping ABS HF380LK is shipped in moisture-protected, sealed bags (typically 25 kg each) or bulk containers. Store in cool, dry conditions, away from direct sunlight and ignition sources. During transport, avoid mechanical impacts. Ensure compliance with local regulations for chemical material handling and transport. Not classified as hazardous for shipping.
    Storage Acrylonitrile-Butadiene-Styrene (ABS) HF380LK should be stored in tightly sealed containers, away from direct sunlight, heat, and moisture. Storage areas should be well-ventilated and free from sources of ignition, as ABS is combustible. Keep away from strong oxidizing agents. Recommended storage temperature is between 5–35°C (41–95°F). Handle with proper protective equipment to prevent dust generation.
    Shelf Life Acrylonitrile-Butadiene-Styrene (ABS) HF380LK typically has a shelf life of 1 year when stored under recommended conditions.
    Application of Acrylonitrile-Butadiene-Styrene (ABS) HF380LK

    Applications of Acrylonitrile-Butadiene-Styrene (ABS) HF380LK in Industrial Manufacturing

    ABS HF380LK is a high-grade thermoplastic widely adopted in critical industrial sectors. Its advanced impact resistance, stability, and surface finish performance have positioned it as a base polymer for manufacturing functional and aesthetic components. Below, we detail distinct downstream applications, process parameters, and regulatory environments specific to this grade.

    1. Automotive Interior Components

    Leading automotive manufacturers rely on HF380LK for injection-molded interior parts, including dashboard housings, pillar trims, and glove box assemblies. Producers value the balance of impact strength, dimensional stability, and Class A surface finish, which is essential for in-cabin applications subject to frequent use and demanding tactile expectations. Strict odor and emission requirements apply to interior use, driving the careful selection of material batches and process controls during compounding and molding.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    2. Home Appliance Housings

    Appliance OEMs specify HF380LK for structural and aesthetic housings of air conditioners, refrigerators, washing machines, and vacuum cleaners. The polymer’s resistance to household cleaning agents and ability to retain white or light coloration after prolonged use are critical. Tight tolerances in wall thickness and gloss uniformity necessitate specialized molding parameters and material drying cycles before introduction to production lines.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    3. Office Equipment Enclosures

    Producers of printers, copiers, and monitors select HF380LK for rigid chassis and covers due to its heat-deflection properties, consistent color reproduction, and resistance to environmental stress cracking from repeated mechanical and static interactions. Precision in mold design and shot weight optimization are key during integration to achieve tight assembly fits and limited part deformation while meeting ESD safety targets.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    4. Luggage Shells and Suitcases

    Luggage and travel goods manufacturers employ HF380LK for hard-shell suitcases requiring enhanced impact resistance, dimensional retention, and ease of decorative finishing. Material blends accommodate specific color and textured surface demands while retaining sufficient flexibility to withstand drop and shear forces during transit conditions. In-mold labeling and secondary printing often occur at this stage to support personalization and branding workflows.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    5. Toys and Educational Products

    HF380LK supports the production of durable and safe plastic toys, blocks, and educational kits. Manufacturers prioritize consistently tight molding tolerances, surface gloss, and high resistance to breakage for child safety. Strict attention to colorant content and migration limits is necessary, and repeated batch testing against global toy safety regulations is required before product release to distribution channels.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    6. Telecommunications Device Casings

    Telecom OEMs select HF380LK for protective covers and chassis of routers, set-top boxes, and hand-held terminal units. The material’s dimensional accuracy and thermal resistance maintain enclosure integrity in heat-producing environments. Surface finish supports laser marking of regulatory information. Antistatic properties can be enhanced through targeted compounding for environments sensitive to static discharge interference.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    Free Quote

    Competitive Acrylonitrile-Butadiene-Styrene (ABS) HF380LK prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.

    We will respond to you as soon as possible.

    Tel: +8618018036652

    Email: sales6@ascent-chem.com

    Inquiry

    Get Free Quote of LG Chem, Ltd

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    ABS HF380LK: Experience from the Manufacturer’s Floor

    Understanding ABS HF380LK from a Production Perspective

    ABS resin has carried global manufacturing for decades. The drive for lightweight, robust plastic with good processing flow pushed engineers and chemists to keep raising the bar. Out of those efforts, the HF380LK grade stands out for its careful balance of impact resistance, gloss, formability, and chemical stability. Speaking directly as a hands-on producer, HF380LK’s recipe walked a hard road: it went through several process overhauls before the factory line consistently turned out pellets that didn’t stick, burn, or warp under the kinds of pressure converters face every shift. We watched our partners struggle with earlier grades that sang on the datasheet but knotted equipment or refused to take a finish during test runs. Feedback from molders shaped every batch, not just the first bag. Today, HF380LK fills a role that simpler ABS compounds cannot easily match.

    Quality Rooted in Real-World Demands

    Most descriptions of ABS stop at its three components: acrylonitrile, butadiene, and styrene. HF380LK blends these monomers in ratios that came from years of production mistakes and partner feedback, not lab guesses. The balance brings high gloss and uniform surface appearance, making it popular for products customers see and handle: automotive instrument panels, appliance casings, and cases for electronics. We run trials on injection and extrusion lines using standard customer molds before scaling up a new batch. Slight shifts in temperature or mixing time show up as visible lines, orange peel, or—most criticized—even pinholes. Our blending zone gets new controls every time someone finds a way to smooth the melt further. The lessons from these test runs led us to tweak initiator dosages and timing; no spreadsheet predicted the reduction in in-mold stress it delivered, but consistent feedback told the story.

    Key Characteristics Observed on the Shop Floor

    The HF380LK grade stands up to minor shocks and knocks, which is not just a number on a chart. Operators drop parts from the press onto concrete; those parts hold up. Over-molded plastic hubs flex further before whitening than many lower-tier products we trialed under the same cycle. Our QA crew measures gloss using controlled lighting—we see HF380LK reflect with a depth some commodity ABS doesn’t approach. The pellets don’t just meet an Izod impact rating; they let downstream operators run at higher speeds because each part ejects more cleanly from standard steel tools. Sink marks, weld lines, and flow marks become less of a daily headache for the molding staff. Fine surface texture is especially relevant for clients who plate or paint, and the stable morphology gives them fewer rejects from finishes that flake or discolor.

    Applications Shaped by Performance and Reliability

    You see HF380LK’s strengths clearest in consumer goods. Appliance housings, like those used in air conditioners or refrigerators, demand uniform color, a scratch-resistant skin, and little warping in hot or cold climates. Producers of high-finish interior trim for cars rely on our resin because the daily friction from fingers, cleaning cloths, and sunlight quickly reveal weaknesses in lesser products. Several leading welding helmet and tool case makers have built process lines specifically tuned for HF380LK. They report fewer press stoppages linked to micro-bubble formation—an issue that traced to a volatile balance in previous formulas. We didn’t learn this in a laboratory; feedback arrived in the form of rejected bins. By adapting our mixing cycle and filter system mid-stream, we solved that. Molders in electronics mention that heat build-up during soldering sometimes warped old ABS grades. With HF380LK, we cut those cases down by increasing temperature resilience, thanks to better control in the reaction vessel ourselves—no outsourcing, no guesswork.

    Hands-On Processing Benefits

    ABS HF380LK doesn’t just promote itself on chemical merits. Day in and day out, it keeps up with high-speed presses. Flow stability stands out most in multi-cavity molds and thin-walled parts. During test runs, uninterrupted cycles become routine because runners and gates don’t clog or cause frozen shots. A number of processors used older resins where batch inconsistency forced them to change barrel settings every shift. With our HF380LK, operators find less yellowing at gate marks or tool-steel interactions, especially on extended runs. Even with rapid tool changes, HF380LK stabilizes within a few shots, saving time and waste. These gains matter most in contract shops juggling multiple SKUs per day.

    Directly Tuning HF380LK for Client Needs

    The plant floor sees all the variables chemical handbooks skip. Some customers look for sharper orange-peel texture; others call out gloss reflection angles as top priority. By keeping polymerization and blending in-house, adjustments can be made within days rather than months. If a partner raises concern over a certain flame test, we invite them to our site for live trials, often changing stabilizer and pigment doses on short notice. Clients with tight tolerances on shrinkage or warpage benefit from our batch-specific logs, not generic promises—the numbers we measure are theirs, not just ours.

    Differences You Notice Compared to Typical ABS Grades

    HF380LK earned its spot through comparison. Lot buyers know basic ABS offers a cost advantage where color and surface are less important, but those grades often lose their gloss and strength under UV lamps, or crack next to hot electronics. We added stabilizers and tighter molecular weight distribution controls to ensure HF380LK resists aging and color shift after repeated cleaning or sun exposure. A shop manager at a major appliance plant once described our grade as ‘trouble insurance’ compared to a rival’s blend—fewer returns, less scrap, longer mold life. Softer, more rubber-rich ABS types encourage easy flow but tend to pick up dents, fading, or peel during handling. Very hard, high-styrene blends threaten to crack or craze if impacted just out of the press. HF380LK rides the middle line: not brittle, not too soft, not flashy until pushed. Weldability stands stronger than with generic injection ABS; paintability remains reliable, particularly after automated cleaning or light shear.

    Longevity and Sustainability Insights Enforced Through Practice

    Every kilogram of resin we turn out gets tracked from reactor to finished pallet. Our plant reclaimed process water years before it became regulatory, based on actual cost savings and stability improvements seen in staff retention and utility bills. HF380LK’s recipe avoids additives that break down under standard landfill or municipal recycling conditions. We talk about compliance because audit teams show up; but, our real lessons came from clients who wash, grind, and re-inject sprues and runners after each batch. Many generic ABS grades haze or lose strength after even a single reprocessing cycle. We tuned our stabilization package to withstand multiple passes, prompting several toolmakers to run closed-loop trials using our own shop-floor scrap. This approach not only reduces cost and landfill pressure, it keeps color and impact performance in spec for downstream operators.

    Process Adaptability and Consistency Through Transparent Manufacturing

    Some competitors rely on external blenders and compounders to produce their grades. Each layer between chemistry and pellet adds risk: stray solvents, wider molecular weight cuts, or inconsistent pigment mixing that results in unpredictable finishes under customer lighting. We do all core compounding on our premises. Every time someone from a partner’s technical team walks the line, they witness closed reactors, nitrogen-blanketed transfer points, and real-time QA sampling along extruder flights. The result is a tight, repeatable pellet that behaves predictably across their entire process chain. This internal discipline matters most on high-throughput lines, where one sticky or under-cured bag can set back shipping schedules by days.

    Safety and Compliance Backed by Practice

    Our knowledge about workplace safety doesn’t just stem from regulations or audits. Direct handling of ABS resins exposes staff to monomer vapor, hot melt, and dust. We enforced closed material transfer and installed local exhaust months before external agencies visited, based on incidents traced to skin contact and inhalation among plant workers. HF380LK’s production uses chain transfer agents, flame retardants, and colorants vetted for absence of banned substances in regulated markets—every shipment crosses internal screens before third parties even test. This model responds to lessons learned and regular discussion with compliance managers at home and abroad.

    Ongoing Development and Customer-Centric Feedback

    Many processors suggest improvements to our HF380LK grade directly—we respond in person or over real-time video calls, not through distant market intermediaries. When a tool or dye shift causes new flow lines, we ask for sample returns, then simulate their plant conditions on our pilot equipment. Adjustments to volatiles or dispersion stabilize results, and customer runs improve batch by batch. Because our own lab tests are biased by our equipment, we depend on field reports: what breaks, which colors hold, which loads cause the edges to split. By keeping engineers and sales techs on the road and engaged with actual molders, we keep a direct line to every improvement.

    Reliability in High-Volume Operations

    High-cadence production demands a resin that won’t surprise press operators with every lot. The HF380LK grade maintains its dimensional accuracy on million-part orders because that’s the barrier our lines need to clear before we call a recipe finished. Some grades look good under glass but shrink unpredictably on real-world molds. HF380LK’s ratios and controls keep that risk in check. Even with extended downtime or operator error, backpressure and torque readings recover in short order and production resumes. This steadiness reduces tool wear and lets maintenance crews focus on real breakdowns, not routine clogging or carbon tracking.

    Technical Support Grounded in In-House Expertise

    We don’t farm out application advice to call centers. Every project with HF380LK gets a named engineer and real production input, bridging the language between chemical theory and shop practicality. Injection, extrusion, and sheet thermoforming users run into different problems; by gathering their headlines during plant visits, we fine-tune each batch, sometimes stopping production midstream to address emerging needs. Experience teaches that shop-floor operators judge a resin by downtime, haul-off yields, and surface finish more than by test lab numbers, so our team reports batch performance in terms customers actually care about: cycle stability, color hold during seasonal changes, cleaning frequency, and rejected part rate.

    Building Upward from Customer Challenges

    ABS development is never a linear process. As factory labor and energy costs rise, every extra hour saved matters. One customer’s facility moved to an accelerated three-shift schedule, pushing equipment to its mechanical limits. Only after months of failures with harder, high-flow ABS grades did they pick up HF380LK. Batch contamination became rare. Screw and nozzle cleanouts dropped. Molds retained polish and geometry more consistently, and operators no longer spent late nights filing down tool gates chewed up by harsher compounds. Each interview with their floor techs adds to a working archive—the kinds of records data sheets rarely address—and helps us further refine HF380LK for future needs.

    Pains and Solutions at the Material Roots

    We watched more than one customer move away from ABS when early versions showed too much static charge or trouble with laser engraving and UPC printing. In HF380LK’s revision cycles, we responded by adjusting antistatic and flow modifiers. Instead of guessing at pigment interactions, we ran side-by-side laser and ink print tests, tweaking throughout a full campaign, until we pinpointed which changes stuck and which failed downstream. Our color masterbatch system is built to accommodate these requests quickly, without the delay that comes when outside tollers handle final coloration.

    Continued Role in Modern Manufacturing

    Even as bioplastics and novel engineering resins grab headlines, ABS remains a backbone for durable, clean-finished, and easily processed products. HF380LK holds its ground by offering a middle line between the commodity resins and the specialized, often-costlier alternatives. Clients relying on cost predictability, surface quality, and robust color demand not just glossy reports but feedback from the factory floor. By staying close to the molding halls and pressing lines, gathering the true costs of breakage, downtime, or returns, we have built our grade around what the market actually faces. HF380LK stands not as a static entry on a brochure but as a solution shaped by all those who transform resin into useful products every day.