LG Chem, Ltd

Products

Acrylonitrile-Butadiene-Styrene (ABS) DP270E

    • Product Name: Acrylonitrile-Butadiene-Styrene (ABS) DP270E
    • Chemical Name (IUPAC): Poly[(1-cyano-1-methylethylene)-co-(1,3-butadiene)-co-(1-phenylethene)]
    • CAS No.: 9003-56-9
    • Chemical Formula: (C8H8·C4H6·C3H3N)n
    • Form/Physical State: Solid
    • Factroy Site:
    • Price Inquiry: sales6@ascent-chem.com
    • Manufacturer: LG Chem, Ltd
    • CONTACT NOW
    VTB
    Specifications
    HS Code 888297
    Density 1.04 g/cm³
    Melt Flow Rate 27 g/10 min (220°C/10kg)
    Tensile Strength 43 MPa
    Flexural Strength 66 MPa
    Flexural Modulus 2200 MPa
    Notched Izod Impact Strength 18 kJ/m²
    Vicat Softening Point 101°C
    Heat Deflection Temperature 89°C (0.45 MPa)
    Elongation At Break 22%
    Hardness Rockwell R105

    As an accredited Acrylonitrile-Butadiene-Styrene (ABS) DP270E factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing The packaging for Acrylonitrile-Butadiene-Styrene (ABS) DP270E is a 25kg sealed, moisture-resistant bag, clearly labeled with product details.
    Container Loading (20′ FCL) A 20′ FCL can typically load **20 metric tons** of ABS DP270E, packed in 25 kg bags, totaling about **800 bags**.
    Shipping ABS DP270E should be shipped in tightly sealed, moisture-proof packaging to prevent contamination and material degradation. Store and transport in a cool, dry place away from direct sunlight, heat sources, and incompatible substances. Adhere to standard transportation regulations for polymers. Handle with care to avoid physical damage to the material during transit.
    Storage Acrylonitrile-Butadiene-Styrene (ABS) DP270E should be stored in a cool, dry, and well-ventilated area, away from direct sunlight and sources of heat or ignition. Keep the material in tightly closed containers or original packaging to prevent contamination and moisture absorption. Avoid exposure to strong acids, bases, and oxidizers. Ensure good housekeeping to prevent dust accumulation and potential slipping hazards.
    Shelf Life Acrylonitrile-Butadiene-Styrene (ABS) DP270E typically has an indefinite shelf life if stored in cool, dry conditions, away from sunlight.
    Application of Acrylonitrile-Butadiene-Styrene (ABS) DP270E

    Applications of Acrylonitrile-Butadiene-Styrene (ABS) DP270E in Industrial Manufacturing

    ABS DP270E, a specialty grade developed and produced by our manufacturing team, is designed for high-value engineering plastics requirements where exceptional impact strength, surface finish, and processing consistency are critical. We supply this grade to diversified industrial clients who require certified, process-stable input for quality-controlled operations in tightly regulated sectors. The following sections outline precise application scenarios where ABS DP270E plays a crucial role in downstream production and finished goods performance.

    1. Automotive Interior and Exterior Components

    Tier-1 and OEM automotive manufacturers rely on ABS DP270E in complex injection molding for dash panels, pillar trims, grille assemblies, and decorative covers, demanding color-matched finishes, dimensional stability, and controlled impact behavior under variable temperature cycles. Our technical support ensures downstream converters achieve stringent process repeatability in multi-cavity, high-throughput tools, aligning with automotive validation and safety benchmarks for long-term in-vehicle performance.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    2. Electrical and Electronics Enclosures

    Electronics manufacturers leverage the anti-static and thermal distortion properties of DP270E in precision-molded housings for consumer electronics, switchgear, and telecommunications. Consistency in shrinkage, high gloss, and regulatory compliance are non-negotiable for electricity safety certifications and assembly line automation. This grade supports intricate geometries and post-molding finishing, aligning with electronics reliability and safety requirements.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    3. Home Appliance Structural Parts

    Major home appliance assemblers specify DP270E for core structural and visible components—such as washing machine tubs, vacuum cleaner bodies, and small appliance handles—that must pass drop testing and aesthetic inspection. The formulation’s balance of toughness and surface clarity withstands UV exposure, repeated chemical cleaning cycles, and multi-shot assembly prevalent in white goods manufacturing.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    4. Toy Manufacturing & Safety Goods

    Industry-certified toy makers incorporate DP270E for molded toy shells, functional blocks, and safety-protection elements due to its validated impact resistance, color consistency under repeated batch production, and compliance with child safety and migration limits. The resin supports high-gloss surfaces and fine detailing for both colored and translucent product lines, crucial for brand licensing partners and multinational toy company audits.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    5. Office Equipment & IT Accessories

    Business electronics assemblers use DP270E for compact yet resilient printer housings, keyboard frames, and modular data system covers, where low warpage, printability, and matte or gloss finish must support repeated daily handling and resist yellowing under fluorescent office lighting. The resin’s consistent rheology allows for efficient flow in thin-wall applications without weld lines or induced stresses, critical for tight assembly tolerances.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    Free Quote

    Competitive Acrylonitrile-Butadiene-Styrene (ABS) DP270E prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.

    We will respond to you as soon as possible.

    Tel: +8618018036652

    Email: sales6@ascent-chem.com

    Inquiry

    Get Free Quote of LG Chem, Ltd

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    Acrylonitrile-Butadiene-Styrene (ABS) DP270E: Material Commentary from the Manufacturer’s Perspective

    Introduction to ABS DP270E

    Across decades in the chemical manufacturing industry, a material like ABS DP270E stands out for those who want a straight answer about quality and performance. Everyday clients—from the people injection molding car dashboards to those forming bright, glossy casings for home appliances—bring us similar questions about how this resin stacks up against other grades or brands. From experience, we’ve learned you don’t just want a product; you want repeatable, predictable results and the proof that it’s actually been made by someone accountable for every pellet. That sums up our perspective on DP270E.

    What Makes ABS DP270E Distinct

    ABS, or Acrylonitrile-Butadiene-Styrene, uses a blend of three monomers. Each monomer brings something to the table: toughness, impact resistance, and the opportunity to build a plastic that doesn’t shy away from cosmetic finishes. We developed DP270E with a tried-and-true ratio that delivers a medium-high flow, good gloss, and solid impact strength. Materials with inconsistent polymerization or weak molecular weights burden converters with downtime. After years overseeing production runs and listening to shop-floor grievances, our view is simple: material consistency makes or breaks a plant’s efficiency, and DP270E responds to this exact need.

    The model DP270E represents a distinct process tuning. Here, balanced flow means less hassle in complex or thin-walled mold cavities. There’s a sweet spot—enough fluidity for intricate injection molding, without losing structure after demolding or risking weld-line cracks. Years of batch testing back this up: DP270E flows better than entry-level ABS, yet doesn’t drop off in toughness like some high-flow, high-gloss grades.

    Specifications Based on Practical Experience

    Specifications start with the actual resin—granular or pelletized—and its melt flow rate, Izod impact value, and Vicat softening point. We assess these in real production scenarios, not just in a controlled lab. Consistently, DP270E measures a melt flow tuned for mid-to-high output cycles, supporting fast cycles that maintain clean mold release. If you’re working with equipment older than a few years or still rely on manual trimming, these properties save real time on the line.

    Impact resistance is a metric we attention closely. With DP270E, you get a level that covers both the expected knocks in transport and minor abuse during assembly. It resists surface whitening and breakage in reasonable ranges. High gloss ABS can sometimes give you headaches with uneven coloring or stress whitening post-assembly. DP270E stays true to color standards and sheds less dust during regrind cycles.

    Heat resistance tracks in a range appropriate for appliance shells, interior automotive trim, and similar cases. DP270E sits at a Vicat softening point that covers this territory. Long-term exposure to moderate heat—such as inside a washing machine housing—doesn’t cause warping, a key complaint we’ve resolved in some imported resins with this model.

    End-Use Based Approach

    Nobody buys ABS to store resin bags on a shelf. Our customers typically mold DP270E for electrical enclosures, consumer goods housings, automotive parts, luggage shells, and small home appliances. One of the ongoing challenges we address relates to colorability and paint adhesion. DP270E responds well to both dry color concentrates and masterbatch, keeping dispersion good for a consistent cosmetic appearance. Pre-colored stock delivers finished parts ready out of the press, reducing or eliminating secondary operations.

    In automotive settings, DP270E finds use in non-structural trim, seat backs, trim sashes, and dash fascia. Molders appreciate its predictable flow and finish, which translates to less scrap and fewer rejections. Anyone who’s had to grind down failed panels or buff out surface defects knows that every wasted part is direct lost profit. This model supports high-cavitation tools and flash reduction, a benefit for those running long shifts or maintaining tight cost control.

    Appliance and electronics clients value scratch resistance and electrical insulating properties. DP270E provides a better surface hardness than entry-level grades, letting products retain a clean look even after extended handling. We’ve had continuous partnerships with appliance manufacturers who run the same grade for years, pointing to the savings earned in fewer defect returns.

    Production Issues Solved with DP270E

    We manufacture DP270E at volumes that allow for strict controls over homogeneity and batch repeatability. It took years to fine-tune a process that rids each pellet of clumping, burnt specks, or microvoids. Our own experience with machines choking on low-grade resin remains a fresh reminder that shortcuts in resin quality cost everyone in downtime and frustration.

    One common headache in molded ABS parts—especially those with matte or high-gloss surfaces—is the appearance of flow marks, silver streaking, or pinholes. The DP270E composition and its process controls reduce surface blemishes and internal voids. By minimizing internal stresses, end users see fewer problems with part warpage or crack formation.

    DP270E adapts to both high-speed, automated production and slower, intricate molding jobs. Compared to some general-purpose ABS, our model shows lower scrap rates even for parts with thin walls or complex ribbing. Our technicians debug injection issues by collaborating directly with line managers or process engineers—so DP270E is tested in the thick of real production conditions, not just in laboratory moldings.

    Comparison Against Other ABS Grades

    Every resin plant churns out products they label as “general purpose,” “high-flow,” or “impact resistant.” In practice, labels mean little without sustained results. Where DP270E departs from baseline ABS is its ability to balance competing needs. Entry-grade ABS may offer a similar melt flow but falters in surface gloss or color stability. Our grade maintains a consistent gloss, enabling customers to mold consumer-facing parts without the need for clear coatings.

    Some high-flow ABS grades push for even faster cycle times at the expense of toughness—prone to cracking or poor weld-line integrity. DP270E gives more forgiveness, both in tooling and in finished part performance. It accepts minor mold variations or suboptimal processing windows without breaking down or charring. We know customers sometimes stretch machine settings or run production at less-than-ideal temperatures. This is where DP270E’s resilience shines.

    We hear requests for high-impact ABS for luggage shells and protective casings. High-impact grades often require tradeoffs, such as duller surfaces or less colorability. DP270E finds the middle ground, strong enough for moderate impacts but resistant to dulling, scuffing, or surface marring. Whether you need a showroom gloss or every part to match a set Pantone code, DP270E offers more flexibility than standard commodity ABS grades.

    Environmental and Compliance Concerns

    Over the past decade, scrutiny on chemical materials only increased. We’ve spent substantial effort ensuring DP270E is free from hazardous additives and complies with regulations handled by major markets. This means no halogens, no heavy metals, and a formula that clears RoHS and FDA’s basic requirements for appliance housings and electrical goods. To curb dust and minimize workplace exposure, our plant rotations include dust collection and clean-handling policies.

    Customers tell us about their compliance headaches every year—RoHS, REACH, and new country-specific rules. ABS DP270E cuts down on regulatory worries, making it easier for manufacturers to pass audits and access export markets. More customers push for post-consumer recycled content or at least a clear traceability chain for raw inputs. We track all feedstocks, and regular plant audits assure downstream users about origin and safety.

    Technical Support and Customer Feedback

    Questions about processing often come after the sale, when issues surface at the molding line or mid-production run. We consider firsthand testing and feedback central to what ABS DP270E represents. Routine customer visits and technical clinics drive improvements to resin drying recommendations, screw design compatibility, and compatible color masterbatches.

    Working as the direct producer, we see details beyond the reach of a trader. Early feedback led us to shrink the pellet size by a millimeter for better mixing. Many plant engineers prefer smaller pellets for denser packing in hoppers, and the change sped up melt uniformity. It’s the kind of practical feedback that only comes after thousands of production hours, not from a marketing brochure.

    We regularly collaborate with tool makers to refine DP270E’s performance in multi-cavity molds. Heat aging, cycle testing, and exposure trials in specific end applications shape the ongoing evolution of the product. It’s not uncommon for a customer to call with an application never considered at launch, and these challenges drive real improvements.

    Ongoing Improvements and the Role of Data

    Constant improvement in resin formulation requires data, not just customer anecdotes. Each lot of DP270E runs tests for visual appearance, mechanical performance, and color consistency. We compile these results and share trend analytics with customers, helping them optimize process windows or tweak color recipes.

    Sustainability pressures push us to upgrade production lines and raw input sourcing. Recent investment in closed-loop recovery systems lets us recycle edge trim and start-up scrap directly into the process. This reduces plant waste and lets us keep tighter reins on batch variation, a detail injection molders respect when juggling color matching or mechanical property certification.

    The feedback loop is bidirectional: we address customer run problems with process changes, and customer insights circle back into new resin blends or additive tweaks for DP270E. Over the past three years, property adjustments led to better paintability, updated UV stabilizers, and colorfastness upgrades.

    Common Issues and Their Solutions

    No resin is trouble-free in every process. DP270E sees occasional reports of knit-line weakness in ultra-thin ribs or pinholing on highly polished molds. Internal testing and on-site troubleshooting uncovered that small tweaks—dryer temperature, back pressure, or mold venting—often correct these. These solutions don’t come from a textbook but from time spent on production floors, watching press operators and maintenance crews up close.

    Another frequent concern ties back to part warpage. ABS naturally presents shrinkage during cooling; DP270E maintains lower, more predictable shrinkage rates than higher butadiene-content or ultra-high-flow grades. By tuning packing pressure and cooling time, part flatness remains manageable in most common wall thicknesses.

    Odor is another aspect always brought up, especially for food-contact and consumer goods uses. We tune our monomer feed rates and refining steps to keep odor to a minimum, a result that shows in lower post-molding offgassing and better customer acceptance during parts inspection.

    Manufacturing Perspective: Scale and Quality Assurance

    As a direct resin manufacturer, ownership over each stage matters. We blend, extrude, and package DP270E in a tightly monitored plant, not spread across contract blenders. Batch labeling and tracking allow any anomaly to be traced straight back to feedstock or process shift.

    Experience shows that raw material purity, not just the polymer recipe, decides ABS’s ultimate properties. We rely on long-term monomer supply from certified sources, and regular audits keep contamination at bay. Every finished lot passes color, fracture, and flow testing before shipping, a safeguard against material variability that can sideline a customer’s line for days.

    Genuine feedback—a bad batch, odd color drift, or foreign specks—turns into an actionable investigation, not a stock apology. Given the types of applications DP270E supports, reliability matters more than low cost. We invest in downtime mitigation and proactive recalls if equipment or material issues surface.

    Shifting Demands and Next Steps

    ABS DP270E didn’t stand still after launch. Market forces move towards higher regrind content, greater color accuracy, and lighter parts without losing strength. Developing lighter-weight DP270E options with internal foaming agents or new stabilization packages marks the next phase. Customers ask for data on lifecycle impacts and expect deep technical transparency. Opening the plant for audits, sharing complete data sheets, and leading joint pilot production runs help our partners stay ahead of supply chain scrutiny.

    We involve customers in field trials for new improvements. Whether that’s tweaking anti-static additives, improving UV stability, or upgrading color fastness, each iteration draws from continuous field feedback. Keeping old formulations on hand for mission-critical legacy parts gives customers insurance that they won’t be forced to switch without warning.

    Summary of DP270E’s Value in Application

    One thing binds together all the successful projects using DP270E: the need for a reliable, consistent resin with predictable molding results. Even modest improvements in cycle time, surface gloss, or impact resistance stack up when you look at millions of finished goods delivered. Clients want less rework, fewer headaches with coloring, and assurance that material problems won’t derail their timeline.

    That’s the bar DP270E strives to meet in our plant and in every customer’s injection line. Years in chemical manufacturing show that honest feedback and ongoing support beat theoretical performance every time. Our commitment—shared in every batch we ship—remains on material performance and accountability driven by those who’ve actually run and maintained these lines themselves.