LG Chem, Ltd

Products

Acrylonitrile-Butadiene-Styrene (ABS) A401

    • Product Name: Acrylonitrile-Butadiene-Styrene (ABS) A401
    • Chemical Name (IUPAC): Poly[(1-cyano-1-methylethylene)-co-buta-1,3-diene-co-ethenylbenzene]
    • CAS No.: 9003-56-9
    • Chemical Formula: (C8H8•C4H6•C3H3N)n
    • Form/Physical State: Pellets
    • Factroy Site:
    • Price Inquiry: sales6@ascent-chem.com
    • Manufacturer: LG Chem, Ltd
    • CONTACT NOW
    VTB
    Specifications
    HS Code 642476
    Chemical Name Acrylonitrile-Butadiene-Styrene
    Product Code A401
    Density 1.04 g/cm³
    Melt Flow Index 4.0 g/10 min (220°C/10kg)
    Tensile Strength 45 MPa
    Elongation At Break 20%
    Flexural Modulus 2200 MPa
    Notched Izod Impact 18 kJ/m²
    Vicat Softening Point 102°C
    Heat Deflection Temperature 90°C (1.8 MPa)
    Hardness 107 Rockwell (R scale)
    Water Absorption 0.2% (24hr, 23°C)

    As an accredited Acrylonitrile-Butadiene-Styrene (ABS) A401 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing ABS A401 is packaged in 25 kg moisture-resistant, white plastic bags with bold black labeling, manufacturer details, and product specifications.
    Container Loading (20′ FCL) A 20′ FCL can load approximately 22 metric tons or 24-26 pallets of ABS A401, securely packaged in standard bags.
    Shipping Acrylonitrile-Butadiene-Styrene (ABS) A401 is shipped in moisture-resistant, hermetically-sealed 25 kg bags or bulk containers. Store and transport in a cool, dry place, away from direct sunlight and heat sources. Ensure packaging is intact to prevent contamination and preserve product quality during shipping and handling.
    Storage Acrylonitrile-Butadiene-Styrene (ABS) A401 should be stored in a cool, dry, well-ventilated area away from direct sunlight and sources of heat or ignition. Keep in tightly closed containers or moisture-resistant bags to prevent contamination and moisture absorption. Avoid storing near strong oxidizing agents. Ensure storage facilities comply with safety and environmental regulations for polymeric materials.
    Shelf Life Acrylonitrile-Butadiene-Styrene (ABS) A401 typically has a shelf life of 12 months when stored in cool, dry conditions.
    Application of Acrylonitrile-Butadiene-Styrene (ABS) A401

    Applications of Acrylonitrile-Butadiene-Styrene (ABS) A401 in Industrial Manufacturing

    Acrylonitrile-Butadiene-Styrene (ABS) A401 is a high-performance engineering thermoplastic produced at our manufacturing facility, engineered for demanding downstream sectors with stringent process and compliance requirements. Our industrial clients apply ABS A401 across diverse segments to leverage its balanced properties of impact resistance, chemical stability, and reliable processability. The following sections detail precise application scenarios, including real-world integration, regulatory frameworks, and typical usage in industrial environments.

    1. Automotive Interior and Exterior Parts

    Major automotive OEMs and Tier-1 suppliers select ABS A401 for high-gloss instrument panels, trims, pillar covers, and certain bumper covers due to its surface finish consistency, dimensional stability, and robust impact resistance in both injection molding and extrusion processes. Production lines apply precise melt temperature and mold pressure controls to enhance cycle efficiency and reduce scrap rates. Downstream integration methods prioritize chip resistance and UV color fastness, especially in climate-varying markets. Secondary processing, like vacuum metallization and painting, adhere to strict material compatibility protocols to ensure lasting adhesion and uniform aesthetics.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    2. Electrical and Electronic Housings

    The electronics sector selects ABS A401 for mass-manufacturing housings, terminal covers, and enclosures for small appliances, computer peripherals, and consumer electronics. The grade’s insulating properties and resistance to warpage comply with high-requirement precision molding lines, supporting insert molding for copper terminals and PCB mounts. Manufacturers rely on stable melt flow and dimensional uniformity to minimize downstream finishing and assembly issues, particularly for snap-fit and multi-cavity components used in home appliances and office equipment.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    3. Medical Device Components (Non-invasive)

    Medical technology OEMs deploy ABS A401 for structural non-invasive device components such as diagnostic equipment housings, laboratory instrument panels, and handheld device casings. The formulation supports biocompatible coloring and is validated for physiological inertness in accordance with regulatory requirements for restricted patient contact. Device molding and assembly lines implement rigorous traceability and batch certification, with full documentation to facilitate post-production audits and regulatory filings. Process validation focuses on consistent flow characteristics and elimination of particulate contamination during multi-shot molding and secondary sterilization steps.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    4. Home Appliance Structural Parts

    Domestic appliance manufacturers incorporate ABS A401 into visible and load-bearing parts for products that include washing machine control panels, vacuum cleaner bodies, and food processor shells. Production lines specify this grade for its balance between high surface gloss, color retention, mechanical shock absorption, and easy downstream painting or metallization. Batch QC protocol requires impact resistance and high-frequency weldability testing to ensure reliability in daily use cycles. Automation-ready snap-fitting and modular assembly are routine in downstream fabrication, reducing rework rates and boosting throughput in high-volume appliance lines.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    5. Plumbing and Sanitary Fittings

    Sanitaryware manufacturers use ABS A401 in concealed plumbing elements, water distribution accessory casings, and non-load bearing fittings because of its chemical resistance to cleaning agents and water stability. End users expect stable dimensions and persistent gloss despite temperature cycling and moisture exposure in wet room or concealed in-wall installations. Industrial lines often execute solvent welding or ultrasonic assembly, requiring the polymer to meet deformability and adhesion characteristics tested per sector-specific protocols.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    6. Toys and Hobby Components

    Brand-name toy manufacturers specify ABS A401 for injection-molded play bricks, model parts, educational kits, and interactive hobby modules. The grade's washability, low residual monomer content, and process repeatability help production sites maintain global toy safety certification while using high-cavity, high-speed mold setups. Regulatory batch traceability systems rely on consistent pigment dispersion and high drop impact values. Clean-room production and color separation management become critical for markets with unique safety and regulatory labeling.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    Free Quote

    Competitive Acrylonitrile-Butadiene-Styrene (ABS) A401 prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.

    We will respond to you as soon as possible.

    Tel: +8618018036652

    Email: sales6@ascent-chem.com

    Inquiry

    Get Free Quote of LG Chem, Ltd

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    Acrylonitrile-Butadiene-Styrene (ABS) A401: Inside Our Manufacturing Approach

    Shaping Plastics: Why ABS A401 Commands Attention

    ABS A401 comes straight from our reactors after years on the floor watching how plastics meet real-world demands. Our teams run the reactors, manage the polymerization process, and do the shaping, granulating, and testing here on-site. This model, A401, has become a mainstay in many lines—not because of branding, but because of consistent output, steady mechanical properties, and repeatable results for customers who build things that can’t afford to fail.

    Every grade of ABS reflects a compromise between strength, impact resistance, gloss, and flowability. Our A401 recipe came out of requests from injection molders who needed less warping on finished parts—sturdy enough for housings, covers, and automotive panels, with enough gloss and cosmetic consistency to stand inspection from both engineers and retail buyers. In the lab, ABS A401 has proven it can reach standard tensile and impact benchmarks year after year. In production, material yields and cycle times matter. With A401, you can count on flow characteristics that fill even large or thin-walled tools without having to overhaul the process, saving downtime and frustration.

    The Chemistry at Work

    On the shop floor, we handle the compounding of acrylonitrile, butadiene, and styrene ourselves, because small variances here translate to big swings in end properties. Acrylonitrile brings chemical resistance and heat stability. Butadiene delivers toughness in cold and under load, with real flexibility for impacts that cause cracks in lesser resins. Styrene ties the blend together and balances gloss, surface finish, and processability.

    Our reactors are monitored around the clock by operators who know the signs of runaway polymerization or off-spec batch consistency. Little changes in ingredient lots, temperature, or pressure can alter the chain length of the Butadiene rubber phase, which then impacts impact resistance. We track this batch by batch, with full traceability, rather than leaving quality to chance. Granules from A401 end up in everything from appliance panels to luggage shells, where appearance means something and mechanical toughness keeps pieces in service.

    Real Impact and Mechanical Performance

    You can’t fake toughness, not if customers are drop-testing finished products. A401 is aimed at high-impact uses, and batch data supports its reputation. Izod impact testing, measured with and without notches, comes back within agreed standards time after time, even across thousands of tons. Stress whitening, surface gloss, and weld-line strength receive similar scrutiny. Alongside mechanical metrics like notched impact and tensile strength, we supply data on melt flow rate, Vicat softening point, and modulus. While customers often ask for higher or lower flow rates, we’ve tuned A401 for balance—a figure high enough for rapid cavity filling without excessive flash or loss of toughness.

    We’ve seen appliance OEMs switch from generic ABS and cut failure rates when shipping to colder climates, all due to the Butadiene phase holding its performance at low temperatures. For automotive parts, where parts face regular vibration, jostling, and sun exposure, A401's heat resistance and long-term stability make it a solid pick. Paint adhesion is another topic—end-users need a surface that takes coatings without adhesion loss or orange peel. ABS A401’s surface morphology supports clean, durable paint bonds, minimizing post-processing rejects.

    Processability and Cycle Times

    Walking through customer factories, cycle time stands out just as much as absolute material cost. With A401, molders get reliable flow without shifting barrel temps or changing back-pressure profiles each shift. The granules behave consistently in hoppers—good pourability reduces bridging and dosing problems. On our production trials, A401 keeps up with the fastest injection cycles on multi-cavity molds, cutting overall energy consumption and downtime driven by jams or uneven fill. Our own data shows scrap rates down when switching from swing-grade general-purpose ABS, sometimes by several percentage points. Less downtime means you use more of each bag, not just because of the material, but because molders don’t need to chase batch-to-batch differences.

    ABS resins sometimes struggle with warpage, sink marks, or splay depending on the design. A401 brings steady shrink rates, as measured during post-mold cooling, which means fewer surprises after demolding. The lower volatility content and good plasticizer compatibility boost dimensional stability, so critical parts retain fit and function across production runs and seasons.

    Color, Surface Finish, and Consistency

    ABS buyers tend to notice small color shifts and gloss changes, especially on exposed parts. A401 is compounded on tightly controlled lines where we monitor pigment dispersion and batch match regular color chips. The base color is uniform from run to run, and our experience matching tailored shades for co-injection or over-molding projects means less rework. Mattes and satins are consistent, and glossy finishes remain unmarred after packaging, shipping, and assembly.

    Molders running A401 in multi-shot or insert-molding have commented on its reliable adhesion to PC and PMMA. For some consumer electronics shells, dual-shot designs depend on reliable bonds between layers, something lower-end ABS can’t manage because of incompatible surfactants or fillers. Our recipe is fine-tuned to strike a balance between base matrix compatibility and robust performance in demanding tools.

    Comparison to Other ABS Grades: Seeing the Difference

    As a manufacturer, we see competing ABS products—commodity, high flow, flame retardant, or specialty-modified—cross our customer labs and even our own. Low-cost commodity grades can be made with high regrind content or variable butadiene ratios. That practice cuts up-front cost, sometimes at the expense of impact performance or predictable melt flow. We focus on raw inputs from verified suppliers and keep process parameters within set points, rather than chasing the lowest procurement cost. This brings more control over toughness and visual quality.

    High-flow ABS can fill long, thin sections but loses some of the impact and heat resistance A401 provides. For electrical enclosures or automotive interior trim, our model meets regulatory and end-use standards across regions. Some competitors might boost flame resistance or chemical tolerance by adding fillers and special antimony-based flame retardants, sacrificing overall toughness and workability—A401 remains focused on clean, steady performance, day in and day out. We meet lot-to-lot consistency through internal testing and rapid feedback cycles. Every out-of-spec batch gets isolated and retested, not redirected into general use.

    Our View on Quality Assurance

    Having boots on the ground across every shift gives perspective on what it takes to keep a plastic grade like A401 within spec. Our in-house teams monitor everything from power supply variations to cooling water stability. Each batch is sampled, pressed, and tested for strength, flow, and appearance. Outliers are documented, flagged, and run through root cause review, since even a small deviation can ripple into lost hours in customer plants. All major input and process data is available to clients who call in with questions or audit requests. We aim for openness, not generic compliance certificates.

    For importers and direct users alike, traceability matters. ABS from multiple plants—even under the same brand—can yield unpredictable results. A401 is born, tested, and packaged under one set of roofs with the same machines and team members tracking each lot number. If a downstream user hits a snag, we retrace from resin kettle to granule to shipment, all part of practicing our own E-E-A-T principles: experience handling production, expertise in chemistry and formulation, authority built up with direct buyers, and trust earned by standing behind batch results rather than editing reports.

    Addressing Customer Challenges: From Mold to Market

    Over years of supply partnerships, customer feedback guides our tweaks and improvements. Some molders require tailored grades—anti-UV, flame-retardant, or anti-static—and we draw on the same compounding lines and lab staff to introduce variants. But for the bulk of consumer electronics housings, power tool shells, or in-vehicle components, the standard A401 umbrella covers needs for robustness, cosmetic finish, and ease of molding.

    Where defects like weld lines, voids, or sink marks show up, our technical teams visit molding floors to watch cycles, review tool conditions, and check if the resin or processing parameters are in play. Sometimes, storage or feed system humidity can affect resin flow; we help adjust for this rather than just shipping a new drum in hopes of a quick fix. On regrind tolerance, our guidance is hands-on too—showing clients how they can reuse trimmed sprues or runners without sacrificing mechanical strength.

    Why Direct Manufacturers Make a Difference

    We’ve watched buyers lose time diagnosing issues caused by even small inconsistencies, or delays from long chains of resellers swapping out or relabeling batches. As a direct producer, we can assure accountability. Every pellet of A401 started here with documented ingredient lots, operator logs, and lab sheets. No third party can cut corners unseen. This leads to more predictable supply schedules and fewer nonconformance claims.

    Some buyers want to push regrind or recycled content higher. We can work with those goals by advising on ratios and confirming results in our own pilot molding lab, testing everything from impact performance to gloss before those changes roll into high-volume production. Our hands-on roots give us the tools to validate customer innovations rather than blocking them for convenience.

    Reliability Across Markets

    A401 has logged miles in export containers, local shipments, and warehouse aisles, exposed to shifts in temperature, humidity, and storage duration. We engineer our packaging to stand up to these realities. Each bag or drum is traceable; any customer with a question can trace back to specific batches, lots, test sheets, and raw input sources. In the rare case where a returned batch flags a problem, we open inspections, double-check retained samples stored in our archives, and adjust production to close the gap—not just swap lots and move on.

    Customers using A401 for home appliances depend on uniform performance under friction, vibration, and day-to-day impacts. Our resin’s chemical composition resists stress cracking and premature aging under UV exposure, giving end-users more confidence in their purchases. Automotive clients see similar wins: interior components hold up to temperature swings, regular contact with skin oils, and exposure to dust without discoloration or brittleness. No batch ships out without pressure to maintain this record, because the cost of returns or replacements far outweighs minor savings at the cost of quality.

    Supporting Sustainability and Future Needs

    Growing demand for recycled and bio-based plastics drives us to adapt processes without losing sight of why A401 works—process discipline, raw material control, transparency, and technical support. We invest in alternate feedstock tests, post-consumer and pre-consumer recycled content assessments, and new compatibilizer blends to make recycled-content A401 a reality. Our in-house lab examines the impact of each change on melt stability, color calibration, and structural strength, refusing to push out new variants before they work in commercial-grade molds.

    We listen to input from both regulators and production-floor operators alike, balancing ever-shifting compliance requests with daily usability. Each regulatory change—ROHS, EU Reach, local safety and labeling—brings paperwork, but also an opportunity to upgrade internal systems and confirm ongoing alignment to customer needs. In-house, continuous improvement programs allow frontline operators and engineers to flag improvement, innovation, or efficiency ideas, which flow into the product as quickly as possible.

    Total Value through Direct Production

    Behind every batch of ABS A401 stands years of production history, product evolution, and line operator pride. We compete on more than price per kilogram: reliable quality, serious technical service, and the willingness to troubleshoot issues on-site as partners rather than vendors. Our experience, technical systems, and team culture make A401 a practical, trustworthy backbone for molding operations that endure changes in market cycles and customer tastes.

    Direct access to our plant and engineering team makes it easier for users to plan, adapt, and find support—whether signing large annual contracts or running short-batch prototyping. A401’s ongoing record of performance and traceability lets you avoid “mystery plastic” worries and focus instead on scaling production, improving part quality, and hitting real deadlines.

    Closing Thoughts from the Production Floor

    Making ABS A401 isn’t about winning every price war; it’s about building in reliability and fostering trust through clear, honest manufacturing. Every operator, technician, and engineer contributes to the material leaving the gate, with a responsibility to the hands further down the supply chain. Differences between ABS grades become clear only through direct use and frank collaboration. We make A401 to meet high expectations, support changes in technology and design, and maintain open channels with those who put it to work in demanding tools and real-world applications.