| HS Code | 236341 |
| Brand | SEETEC |
| Product Name | Ethylene Vinyl Acetate (EVA) EA33400 |
| Material Type | Ethylene Vinyl Acetate |
| Vinyl Acetate Content | 18% |
| Melt Index | 2.0 g/10 min (190°C/2.16 kg) |
| Density | 0.936 g/cm³ |
| Tensile Strength | 13 MPa |
| Elongation At Break | 800% |
| Hardness Shore A | 90 |
| Flexural Modulus | 30 MPa |
As an accredited SEETEC Ethylene Vinyl Acetate (EVA) EA33400 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | SEETEC Ethylene Vinyl Acetate (EVA) EA33400 is packaged in a 25 kg white plastic bag with blue and green branding. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL): 17 metric tons (MT) packed in 680 bags, each 25 kg, palletized for SEETEC EVA EA33400. |
| Shipping | SEETEC Ethylene Vinyl Acetate (EVA) EA33400 is typically shipped in 25 kg polyethylene bags, transported on pallets to ensure stability and prevent contamination. The product should be stored in a cool, dry place, away from direct sunlight and moisture. Shipping complies with standard handling and safety regulations for non-hazardous chemicals. |
| Storage | **SEETEC Ethylene Vinyl Acetate (EVA) EA33400** should be stored in a cool, dry, and well-ventilated area away from direct sunlight, heat sources, and ignition points. Keep in original, tightly sealed packaging to prevent contamination and moisture absorption. Avoid contact with strong oxidizing agents. Ensure all storage containers are labeled appropriately and follow standard industrial safety practices for polymers. |
| Shelf Life | SEETEC Ethylene Vinyl Acetate (EVA) EA33400 typically has a shelf life of 12 months when stored in cool, dry conditions. |
As the direct producer of SEETEC EVA EA33400, we serve industrial partners across globally regulated sectors that rely on polymer materials with specific mechanical properties, processing ease, and consistent quality. The following application segments represent the principal downstream scenarios where our EVA delivers measurable value, supported by established regulatory standards and data-backed formulation practices.
Photovoltaic module manufacturers require encapsulants that can withstand exposure to UV, heat, and moisture over decades. EA33400, with its controlled melt flow index and defined vinyl acetate content, supports the lamination process by providing reliable adhesion and long-term clarity, contributing to module durability and power retention. Regular material audits and batch testing ensure that films manufactured with this grade can meet the rigorous durability demands of advanced solar innovations.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Hot melt adhesive manufacturers incorporate EA33400 to control viscosity, bonding strength, and open time, especially for case sealing, woodworking, and nonwoven hygiene product assembly. Its defined vinyl acetate percentage promotes flexibility and immediate wetting while maintaining compatibility with waxes and tackifying resins. We routinely track batch viscosity and acetoxy extractables to ensure adhesives remain in line with downstream operators' rheology targets.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
The footwear sector leverages the impact resilience and cushioning properties of our grade within midsole, outsole, and insole production. Processing teams fine-tune compound elasticity, abrasion resistance, and foam density by adjusting mixing ratios and molding profiles, backed by both internal and third-party mechanical testing to support diverse footwear product lines.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Wire and cable compounders require insulation materials that maintain dielectric strength and flexibility while resisting cracking at low temperatures. This EVA grade integrates well with inorganic fillers and flame retardants to deliver cable jackets that satisfy electrical safety and global fire protection standards. We inspect for gel content and extrudability to support high-throughput cable production environments.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Packaging converters employ this copolymer for its flexibility and seal strength in industrial films. The resin’s compatibility with PE and ease of processability make it essential for heavy-duty sack liners and shrink films, where toughness and puncture resistance protect goods from handling damage. Regular QC includes tear strength, thickness uniformity, and seal integrity checks matching packaging market needs.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive SEETEC Ethylene Vinyl Acetate (EVA) EA33400 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8618018036652
Email: sales6@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
In our years manufacturing polymer resins, the characteristics of a grade set the tone for our day-to-day production—not marketing blurbs or spec sheets. SEETEC EVA EA33400 has proven itself reliable under many conditions, both in our extrusion hall and on the lines of our end-users. This EVA grade brings together consistency and practical workability in a way our technical team appreciates every time they fill a hopper.
EVA copolymers come in many grades on the market. They may look similar in bag or pellet, but years of production have taught us that subtle differences in formulation have a big impact once the machines start running. We developed EA33400 aiming for balanced flexibility and process control—striking that point where you get enough elasticity for demanding applications but not so much softness that strength suffers.
At the molecular level, EA33400 draws on our control over vinyl acetate content, which we keep in a bandwidth designed for foam products, cable insulation, footwear, modifiers, and adhesives. Through our reactor line, we achieve a melt flow rate where processors can adjust temperature and screw speed without risking gels or inconsistent expansion. Lower grades often don’t expand as cleanly, while higher MFR types might deform under pressure. In our experience, this window gives converters more leeway in tuning their equipment without stops or scrap.
If you spend time in a chemical plant, you learn that small metric differences influence real output. EA33400 shows a melt flow rate sweet spot, which allows for manageable processing on conventional extruders and injection molding machines. Over the years, our engineers optimized pellet size and shape to minimize dust and bridging in conveying systems—a common headache for operators running similar resins from other sources.
We also standardized particle distribution, reducing the chances of dosing error or feeding issues in compounding. This level of handling predictability does not just support neat resin use; it makes blending with color masterbatch, flame retardants, or compatibilizers much more reliable. End users running off-grade alternatives have brought us tales of clogged hoppers, inconsistent cell structure in foam sheets, and variable peel strength in laminated films. EA33400 has shown measurable improvement in these areas, confirmed by direct comparison trials with parallel grades.
Factories that produce EVA-based foams, cable coatings, footwear midsoles, or adhesives care about more than the polymer’s chemical fingerprint. They need to minimize downtime, control energy use, and hit product specs for thousands of consecutive cycles. EA33400 has passed these real world hurdles both in our plant’s advanced pilot lines and at our downstream partners.
Footwear manufacturers choose this grade because it gives midsoles and insert pads a good mix of cushioning and resilience without unpleasant odors or discoloration. Producers of cable compounds rely on the grade’s thermal stability, avoiding smoke or char that can arise with less-refined grades. Flexible foam sheet lines get smooth cross-linking and negligible shrinkage, which remains consistent, pallet after pallet. We don’t see crushing or collapse in closed-cell structures as long as process windows are followed.
For hot melt adhesives and film modifiers, EA33400 brings adhesion characteristics that bond across a range of substrates. Our colleagues in packaging see less curl and improved optical clarity. OEMs in wire-coating have reported less foaming at the extruder vent and better surface finish. These observations have come from both large, automated installations running round-the-clock and smaller, more manual production lines that can’t afford to tweak settings batch by batch.
We did not land on EA33400’s recipe overnight. It took years of field tests, feedback, and adjustment. Every time we tweaked vinyl acetate levels or temperature profiles, it forced us to rethink catalyst loading or stabilizer packages. We saw firsthand how minor impurities could raise gels in transparent films, so we invested in better vacuum stripping and filtration on our reactor lines.
Polymerization yield fluctuation was another challenge. Early on, batch consistency lagged and we saw the result in customer lines: off-spec melt flow, excessive yellowing, or gels in finished rolls. Only after we rebalanced our raw material sourcing and automated several reactor controls did we bring standard deviation under control. Now, incoming QC on pellets has narrowed to a level where even high-speed equipment can count on lot-to-lot reliability. Every few months, a customer sends samples from another supplier’s batch plagued by pinholes or delamination. It is an immediate reminder of the continual work needed to uphold the standards of a grade like EA33400.
Technical datasheets highlight numbers, but experience has shown us much of the story lies in applications. Many generic EVA grades promise high melt indices or flexible foaming, only to stumble with batch instability or strong acetic odors once processing heats up. We assess comparison samples in our own foam and cable labs each quarter. Some cheaper grades undercut on price but cause a spike in scrap due to poor compatibility with colorants or slipping agents. Others pitch higher vinyl acetate content but run into post-cure shrinkage or lamination bubble defects.
Consistent results matter more than headline properties. EA33400 has proven easier to control across line speeds and product types. Blending compatibility stands out—customers mixing local or imported masterbatches have measured better dispersion without needing high shear. In multilayer film coextrusion trials, we’ve seen fewer interfacial voids and more uniform thickness compared to lower cost rivals or specialty grades not designed for general extrusion.
Another area where differences show up: odor and gel count in end products. We run odor panel and light transmission tests for film and hot melt grades. EA33400 consistently produces lower volatile profiles after lamination compared to many import alternatives, which means less rework and lower consumer complaint rates. End users making products for export markets note the easier time passing EU and U.S. packaging or toy safety requirements—not all grades clear those hurdles, especially ones noisy with off-odor or containing poorly polymerized fragments.
No EVA plant ever goes a year without a few line operators or maintenance engineers making their voices heard about process hiccups. From their feedback, we refined drying and transfer steps for EA33400 to eliminate static and pellet fragmentation. We learned that high ambient humidity changed powder flow in silos over long storage cycles, especially during monsoon season. Fine-tuning anti-static agents and adjusting packaging helped storage stability, especially for export containers facing long sea routes.
In direct discussions, extrusion operators described cases where blends with certain plasticizers or flame retardants led to unexpected extrusion pressure spikes or voids in foam mats. This pushed us to provide actual hands-on technical support, not just batch COAs. By running comparison trials side-by-side, we worked with both rigid quality managers and experienced plant engineers to adjust temperature, backpressure, or die gap. We compiled these adjustments into troubleshooting guides for our end users. Documentation is adapted based on feedback, not just laboratory models.
Occasionally, customers try to switch between commodity-grade resins, chasing small cost savings. In most such cases, defect rates rise: foamed sheet lots collapse, cable insulation peels erratically, or solvent resistance drops in coatings. After scrutiny, the process reverts to EA33400, often after several days of trial and error. Plant supervisors have shared with us their preference for known, steady resin sources because the cost of downtime far outweighs any minor price difference.
Polymer resin production rewards detail, discipline, and transparency. In our EVA workshops, every kettle load is electronically tracked from monomer charging to pelletizing lines. Parameters are not based on imitating other companies; they reflect performance we track both in-lab and in the field. Resin grades lose market value without real, trackable product yields. EA33400 was born from meetings involving lab technicians, operators, and product managers—everyone who touched the product, not just sales offices.
Field visits and plant audits sharpened our understanding of how EVA performs in extruders older than a decade, not just in the latest high-speed injection molding machines. Plant managers told stories of downtime caused by off-brand resins, motivating us to push standards higher. Adjustments in process, filtration, and handling did more for the grade’s reputation than any specification sheet.
Quality manufacturing also means minimizing impact and managing lifecycle responsibly. Our team reduced scrap generation at the compounding stage. We introduced closed-loop recycling for offcuts and trimmings and monitored emissions in line with the latest compliance targets. Process water is recycled, acids are neutralized before disposal, and we audit every raw acetate drum for traceability.
We recognize the trend toward sustainability in all resin-intensive markets. For EA33400, customers have pushed us to document and reduce the presence of heavy metals, phthalates, and other concerning additives. Each shipment can be traced to emissions-tested lots, and independent testing onsite confirms compliance with changing global regulations. These steps ensure the resin makes sense for producers keeping an eye on brand safety, as well as shifting government expectations in large export regions.
No single grade fits every mold, extrusion die, or application window. Some manufacturers need more specialized resistance or ultra-high elongation; others want custom pellet shapes for proprietary feeding systems. In these cases, EA33400 may serve as an adaptable foundation to which further additives are blended, or a jumping-off point for custom modification. Demands for more rapidly biodegradable resins or higher-recycled-content EVA are growing. While EA33400 represents a proven workhorse, we have invested in research stations to test new recipes and push boundaries, balancing performance, safety, and environmental demands.
Ongoing feedback continues to shape regular updates to internal formulation and process controls. Even today, every modification to our production protocol or raw materials must stand up to actual shop-floor scrutiny, both in our plant and in customer facilities. Our own experience in developing and scaling EA33400 proves that productive partnerships with end-users and openness to critique raise standards for the whole supply chain.
In the resin world, a product like SEETEC EVA EA33400 accrues value not simply from published numbers but from day-to-day impact on productivity, defect rates, and finished product performance. From the early polymerization stage to final quality checks before shipping, we have shaped the grade to reflect what downstream users actually need, rather than what marketing might claim. Our work continues, adapting to new processing realities and tighter global standards. Consistency, adaptability, support—these remain the real measures of our manufacturing, and EA33400 stands on our line as proof.