LG Chem, Ltd

Products

Polyethylene (PE) JSB194

    • Product Name: Polyethylene (PE) JSB194
    • Chemical Name (IUPAC): Polyethene
    • CAS No.: 9002-88-4
    • Chemical Formula: (C2H4)n
    • Form/Physical State: Pellets
    • Factroy Site:
    • Price Inquiry: sales6@ascent-chem.com
    • Manufacturer: LG Chem, Ltd
    • CONTACT NOW
    VTB
    Specifications
    HS Code 992498
    Product Name Polyethylene (PE) JSB194
    Density 0.920 g/cm³
    Melt Flow Index 1.9 g/10min (190°C/2.16kg)
    Tensile Strength At Yield 11 MPa
    Elongation At Break 500%
    Flexural Modulus 200 MPa
    Vicat Softening Point 93°C
    Shore Hardness D 50
    Melting Point 115°C
    Application Film extrusion

    As an accredited Polyethylene (PE) JSB194 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing Polyethylene (PE) JSB194 is packaged in a 25 kg white woven plastic bag, clearly labeled with product name and batch information.
    Container Loading (20′ FCL) Container Loading (20′ FCL) for Polyethylene (PE) JSB194: Typically loads 24–26 metric tons packed in 25 kg bags, safely palletized.
    Shipping Polyethylene (PE) JSB194 should be shipped in clean, dry, sealed containers such as bags or drums, protected from direct sunlight and moisture. It is classified as non-hazardous, but should be stored and transported at ambient temperatures to prevent deformation. Ensure containers are clearly labeled and handled according to local regulations.
    Storage Polyethylene (PE) JSB194 should be stored in a cool, dry, well-ventilated area, away from direct sunlight and sources of ignition. Keep containers tightly closed and prevent contact with strong oxidizing agents. Avoid prolonged exposure to heat or moisture to maintain material integrity. Store bags or containers off the floor to prevent contamination and ensure easy, safe access for handling.
    Shelf Life Polyethylene (PE) JSB194 typically has an indefinite shelf life if stored in cool, dry conditions away from direct sunlight.
    Application of Polyethylene (PE) JSB194

    Applications of Polyethylene (PE) JSB194 in Industrial Manufacturing

    PE JSB194 is engineered as a high-quality base polymer with tailored physical properties, delivering consistent processability and performance for advanced industrial production. As the original manufacturer, we support multiple downstream markets which demand strict compliance and integration with high-volume processes. Below, we detail the principal application sectors for our grade, outlining the most relevant industry regulations, precise formulation ratios, real-world process points, and the typical finished goods produced with this material.

    1. Flexible Packaging Films (Food Contact & Industrial Use)

    Converters deploy this resin in blown and cast film extrusion, valuing its balanced mechanical strength and clarity required for multi-layer packaging of perishables, dry food, and goods demanding moisture protection. Production lines require rigorous migration and contamination controls, as well as high melt uniformity to ensure consistency in lamination and sealing. The final films, delivered in rolls or cut bags, serve downstream FMCG packaging and industrial protective wrapping markets.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    2. Injection Molded Consumer & Industrial Goods

    This grade is used in precision injection molding lines for producing robust parts with high stress-crack resistance. OEMs use it to mold caps, containers, trays, and specialty items requiring dimensional stability and repeatable cycle performance. Molders must comply with traceability and migration standards (for food-contact articles), and often integrate this material with masterbatches for coloring or property modification without plasticizer migration.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    3. Cable Insulation & Jacketing

    Cable manufacturers require a resin with controlled dielectric properties and chemical stability. This grade is utilized as the insulation and protective sheath in low and medium voltage wiring, data transmission cables, and signal lines. Production demands exacting melt flow index tolerance and metal-catalyst impurity controls to avoid electrical failure or signal interference. All manufacturing steps must track batch origins for compliance audits in regulated markets.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    4. Blow Molded Rigid Containers

    Large- and small-scale bottle and drum producers employ this material for its environmental stress crack resistance and consistent parison extrusion in high-volume rotary blow molding systems. Process operators depend on the grade’s melt strength to produce uniform wall thickness, with requirements for food safety and UN/DOT packaging certifications for dangerous goods transit. Quality teams test every lot for residual volatiles, migration, and mechanical impact stability.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    5. Rotational Molded Hollow Articles

    Rotational molders use this resin to create seamless hollow products for sectors that require high durability and stress crack resistance, such as water tanks, playground equipment, and traffic barriers. The resin’s particle size distribution and thermal stability enable even powder dispersion in molds, ensuring there are no weak spots or voids after sintering. Production documentation for each batch must accompany the finished articles, meeting safety and hygiene certifications.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    Free Quote

    Competitive Polyethylene (PE) JSB194 prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.

    We will respond to you as soon as possible.

    Tel: +8618018036652

    Email: sales6@ascent-chem.com

    Inquiry

    Get Free Quote of LG Chem, Ltd

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    Introducing Polyethylene (PE) JSB194: Reliability from the Source

    What Sets JSB194 Apart in Real-World Production

    Many polyethylene grades line the shelves of the chemical industry, but few have proven themselves through years of hands-on processing quite like JSB194. Our team has run this particular resin through everything from film extrusion lines to injection molding machines, measuring results against dozens of other PE grades. We keep close tabs on the little variables that matter most to operators—melt flow stability, consistency in pellet shape, and performance under heat, torque, and pressure.

    JSB194 isn’t just a number on a datasheet to us. It’s a product we’ve lived with and learned to trust. In our experience, the bulk density sits reliably in the upper middle range, making it easy to handle in both bulk transfer and manual feeding. The material's melt index offers a predictable flow in most single screw and twin screw machines. This predictability helps reduce downtime and lets our partners get more done in less time.

    Real Manufacturing Needs Guide Our Design

    Customers who approach us for polyethylene usually bring their stories with them: “We’re getting gels in the film,” or “Feed keeps bridging in the hopper.” There’s no point recommending a generic resin when these specific headaches demand answers rooted in actual shop-floor trials. We developed JSB194 to tackle practical issues: clean melt behavior, minimal neck-in during film extrusion, less die drool, and a good drawdown window on blown film lines.

    Unlike lower-end or commoditized PEs, JSB194 handles filler blending without clumping. In one of our production runs for food-grade packaging, we discovered the material resisted clumping with calcium carbonate at ratios up to 15%, something that lower-molecular PEs often fail at. Processors looking to drive down costs with mineral fillers appreciate this, as do customers who demand consistent mechanical properties in the finished product.

    Application Experience: Packaging, Molding, Heavy-Duty Liners

    JSB194 serves across varied sectors, but over the years, its strongest performance has been in blown film for packaging and liners. In high-speed film lines running 24 hours, we’ve seen a lower frequency of bubble breaks and a smoother layflat compared to standard PE grades. Our partners in agriculture packaging have found that JSB194 holds up to tough mechanical usage—grain bags, silage wrap, stretch film for pallets.

    Some sheet and thermoforming manufacturers faced problems with gauge control and web tears when using lower-spec resins. We brought JSB194 to their lines for trial runs, and both the extrusion crew and the QA managers noticed tighter thickness tolerance and nicer edge trims, reducing rework costs and customer complaints. Injection molders who produce large containers or lids report easier filling of multi-cavity molds, and fewer sink marks where wall thickness varies.

    The Technical Backbone: Consistency and Purity

    Our lab technicians pull samples off every batch of resin that leaves the plant. They run melt index tests using instruments that we regularly calibrate personally—eliminating guesswork, improving lot-to-lot predictability. With JSB194, these results rarely wander outside a narrow band, so converters rarely face surprises when they switch between truckloads. This kind of consistency saves time, for both us and our customers. In situations where visual clarity matters, like produce bags or milk packaging, the resin's low gel count allows for clear, attractive films.

    We take pride in the resin’s purity as well. Dust, black specks, or gels creeping into the process can throw off high-speed lines or create visible flaws in packaging. Our purification steps and filtering protocols have evolved from decades of mistakes and improvements, not just best practices pulled off the shelf. It takes careful attention—not just to the extrusion tools, but to dryers, silos, and valves, all the way down the line.

    Differences That Matter: Living with Polyethylene JSB194

    Many sales brochures draw up minor variations as if they define a product. We don’t claim every customer will notice every difference in the first bag they open, but over time, the gains add up. In everyday plant operation, JSB194 wins steady praise from operators for reliable pellet feeding—less bridging in silos in humid climates, less dust clogging vacuum loaders. During a rainy spell last spring, we saw fewer feed interruptions compared to similar-density alternatives brought in from North Asian suppliers.

    Resistance to stress cracking separates JSB194 in critical applications. Bottlers making caps and closures for beverages or oils have flagged this after extended warehouse simulations. Inferior grades might work for a short test, but cracks showed up in customer returns five or six months later. After evaluating our JSB194 parts, the failures dropped: parts remained flexible and strong, even after long haul shipments and changes in temperature.

    Impact on Downstream Productivity

    JSB194 has been integrated into large-scale conversion plants where downtime translates into real economic losses. During our process engineering audits, we focus on start-up waste and line cleanouts. With this resin, film start-up roll scrap numbers stay low. Even during recipe changes—coloring, adding slip or anti-block agents—the transitions run smoother. That saves material and lets shifts stay on target for their waste reduction goals.

    Plant energy consumption has come under a microscope in recent years. JSB194 melts at lower barrel temps compared to older PE grades. Extruders burn less energy, which processors care about both for cost and for emissions targets. In one of our partners' plants, this translated into a 4% power savings across five lines over a year's runtime. That isn't just marketing—it's the product of field testing and paying attention hour by hour, year by year.

    Toughness and Flexibility: What Customers Say Matters Most

    Processors often ask for lab data, but the real proof comes from their own shop floor. One bag manufacturer we’ve worked with pushes PE film to the limit on dart impact and puncture resistance. They compete in export markets where buyers test incoming material batches thoroughly. Their repeated feedback: JSB194 allows production of thinner films, holding onto mechanical strength where other grades would have required thicker, heavier product to pass the same drop tests.

    Film extrusion supervisors at our customer sites also reported better edge stability and fewer tears during slitting and folding. These observations come from busy production floors, where a minor improvement ends up saving thousands of dollars per year by reducing rewinding, repackaging, and rejected rolls.

    Clean Processing, Less Carbonization

    We’ve spent years listening to plant operators talk about how cleanup chews up time and resources. With this polymer, less carbon residue forms inside hot-run barrels, dies, or screen packs—an issue plaguing lower-end resins and recycled blends. Over-hauling a film line for routine cleaning interrupts schedule and burns labor hours. Customers running JSB194 notice they can stretch cleaning intervals, run longer between shutdowns, and spend less time fighting buildup. Feedback like this, collected from months of tracked run time, guides our choices in polymerization conditions and catalyst systems every production cycle.

    No Guesswork: Resin Quality People Can Trust

    Quality control makes or breaks trust. We get that every load of resin represents a risk for film producers, especially those serving food packaging or health-sensitive markets. They worry about odor, taste transfer, or off-color contaminating their products. JSB194 is produced using high-clarity feedstocks and close monitoring of potential volatile residues. Packing the resin in clean, moisture-proof bags or bulk containers, we track every shipment and accept returns if the material doesn’t meet the agreed benchmarks. That kind of warranty reflects how closely we rely on the same resin in our own downstream fabrication.

    Years ago, we used to lose entire shifts sorting through off-spec resin—either too sticky, too powdery, or inconsistent in color. Since refining our batch processing and stabilization techniques, those complaints have dropped sharply. Customers who run high-output blown film lines, especially in volatile climates, report less batch-to-batch adjustment, smoother extruder operation, and fewer emergency stops. While some chemists hunt for marginal gains on a computer, we still walk the line, checking resin feeds, monitoring extruder amps, and talking shop with operators directly.

    Global Trends and the Push for Better Polyethylene

    Polyethylene’s reputation doesn’t come from lab analytics alone. Changes in regulatory oversight, food contact rules, and sustainability targets push every serious manufacturer to improve. The expectation for lower extractables, tighter specs for odor, and more transparency in sourcing all shape the day-to-day choices at our facility. We track the latest changes in REACH, FDA, and tough local mandates on packaging waste. JSB194’s production draws from suppliers who share a record of reliable, traceable feedstock sourcing. We don’t cut corners on stabilizers or antioxidants, since field experience shows how low-cost additives often trigger quality headaches down the supply chain.

    As pressure mounts for recyclable and reusable packaging, JSB194 keeps showing its value in reprocessing and re-blending. Films manufactured with this resin regain much of their original quality in recycling streams, as verified by tests with local secondary processors. Recyclers find the melt flows remain predictable, allowing for more incorporation of plant scrap without jamming lines or producing fuzzier, weaker product. We field questions about closed-loop projects every week—real technical progress comes from resins that survive the journey through multiple extrusion cycles.

    Addressing Customer Concerns: Delays, Scrap, and Safety

    The reality in plastics manufacturing involves more than what gets measured in material certificates. Plant managers stress about line backlog, downstream stoppages, returns from end customers, and regulatory surprise checks. A resin grade that flares up odors or melts unevenly triggers complaints, downtime, or worse—fines. With JSB194, we see a lower incidence of off-odor notifications, particularly in sensitive food and personal care packaging. We attribute this to both strict feedstock controls and ongoing investment in degassing and filtration. Crews handling the resin even mention less dust, easing concerns about workplace cleanliness.

    On safety, the guidelines keep getting stricter. Our production tracks tolerance ranges for potentially hazardous byproducts, with results checked by external labs as well as our in-house chemists. We never skip these controls—not because regulations say so, but because plant engineers who skimped on quality have paid for it with customer loss and equipment damage.

    Practical Packaging Solutions Backed by Real Use

    Some customers ask how JSB194 stands up in multilayer structures or as a base for specialty blends. We’ve tested its compatibility with tie layers, barrier films, and different EVOH or polyamide grades on commercial co-ex lines. In food packaging, the resin forms secure heat seals with low odor migration, giving converters greater freedom to formulate. In shipping sacks, liners, and stretch films, JSB194 supports downgauging—achieving strong performance at lower thickness, which lowers costs and waste at the same time.

    True partnerships with processors require us to troubleshoot on-site. During a line trial at a major food packaging plant, persistent streaks and gels from another supplier’s resin stopped production. Our technical staff collected line-side resin samples and swapped in JSB194. The operators dialed in tighter film gauges, improved yield, and recorded a drop in gel complaints from the inspection team. No spec sheet or certification counts as much as that level of hands-on troubleshooting.

    What We’re Doing to Keep Improving

    We listen when customers run into trouble, and we try to translate field experience into process changes. For JSB194, we’ve upgraded sieve mesh sizes in our pellet screening and installed better contaminant monitors in real time. Feedback from one large film plant prompted us to automate dust extraction on the feed conveyors, which slashed reject rates at their QC step. Our continuous improvement comes from a cycle of direct customer feedback, plant audits, and real-world performance testing—not just lab-scale experiments.

    Product reliability also depends on transparent communication. We never hide behind disclaimers or pass the blame along the supply chain. If a drum arrives off-color or a bag contains excess fines, we review the entire batch, run cross-checks, and replace the material if necessary. The aim isn’t to meet minimal specs but to build long-term trust by fixing issues, learning from mistakes, and sharing those lessons across both our teams and partner operations.

    Our Commitment to Real Value

    Polyethylene resins aren’t glamorous, but their importance can’t be overstated—especially for processors who carry their factories through busy seasons, sudden regulatory changes, and relentless cost pressure. JSB194 has grown into one of those resin grades customers come back for, not because of flashy marketing, but through steady, real-world results. We understand long production runs don’t forgive small inconsistencies. That’s why we treat every batch as the foundation for thousands of finished products—packing films, heavy-duty sacks, molded parts, and consumer goods—moving through supply chains across the globe.

    In day-to-day production, what matters is whether a resin does its job without drama. JSB194 isn’t a miracle cure for every process, but it stands out for reliability, straightforward processing, and support borne from factory-floor experience. The smallest details—like smoother feeding, lower dust generation, and tighter gauge control—show up in higher yields, fewer complaints, and repeat business. We back up those results with ongoing technical support, drawing on the lessons of decades in polyethylene manufacturing.

    Ask for a Better Experience, Not Just a Better Resin

    Polyethylene JSB194 stands for more than just a product designation. It reflects investment not only in chemistry but in every hands-on cycle of manufacturing, from the refinery trays to the dispatch dock. Customers enjoy resin delivered on time, with the performance they’ve come to expect run after run. They can reach factory engineers for direct advice, not just standard documentation. Our team takes pride in answering hard questions and solving challenges on-site, not just pointing to a chart or certificate.

    In an era filled with new market entrants and unproven imports, trust built from consistent, practical experience remains the best foundation for strong partnerships. JSB194 continues to support factory owners, production supervisors, and end users who count on polyethylene to do its job—quietly, reliably, and without surprises—every single day.