| HS Code | 288783 |
| Product Name | LUTENE-H High Density Polyethylene (HDPE) ME1000 |
| Density | 0.950 g/cm³ |
| Melt Flow Index | 0.05 g/10min (190°C/2.16kg) |
| Tensile Strength At Yield | 25 MPa |
| Elongation At Break | 600% |
| Flexural Modulus | 950 MPa |
| Notched Izod Impact Strength | No break (23°C) |
| Vicat Softening Point | 127°C |
| Escr Condition A F50 | >1000 hours |
| Processing Methods | Blow Molding, Extrusion |
| Application | Blow molded containers, drums and tanks |
As an accredited LUTENE-H High Density Polyethylene (HDPE) ME1000 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | LUTENE-H ME1000 HDPE is packaged in 25 kg white, robust polyethylene bags labeled with product details, manufacturer, and safety information. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL) for LUTENE-H HDPE ME1000: 25 metric tons net weight, packed in 25 kg bags, 1,000 bags per container. |
| Shipping | LUTENE-H High Density Polyethylene (HDPE) ME1000 is shipped in 25 kg moisture-resistant bags, securely palletized, and shrink-wrapped for stability during transport. Bulk shipments are available upon request. All packaging ensures protection from contamination and moisture, complying with safety standards for transportation and storage of industrial polymers. |
| Storage | **Storage of LUTENE-H High Density Polyethylene (HDPE) ME1000:** Store in a cool, dry, well-ventilated area away from direct sunlight and sources of heat to prevent degradation. Keep bags sealed and off the ground to avoid contamination with dust, dirt, or moisture. Avoid exposure to strong oxidizers and keep away from flammable materials. Follow local regulations for storage of polymeric materials. |
| Shelf Life | LUTENE-H High Density Polyethylene (HDPE) ME1000 has an indefinite shelf life if stored in cool, dry conditions, away from sunlight. |
LUTENE-H High Density Polyethylene (HDPE) ME1000 is engineered for high-performance requirements in modern industrial manufacturing, supporting a wide spectrum of downstream processing sectors. Its consistent molecular structure, strength parameters, and chemical resistance underpin its selection by process engineers across critical production chains. Below we outline major application areas based on real downstream integrations, quality standards, formulation practices, and finished goods produced using this grade.
Municipal drinking water and infrastructure providers source LUTENE-H ME1000 for its high durability in the fabrication of pressure pipes that require long service life and resistance to crack propagation. Processors extrude this material into pipe systems designed for transportation and distribution networks where regulatory certification is mandatory for potable water contact. The formulation targets rigorous standard compliance for chlorine resistance and migration, with careful process control over resin purity during melt extrusion.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Producers of intermediate bulk containers (IBCs), drums, and chemical storage tanks employ this grade for its stress crack resistance, low permeability, and compliance with hazardous material handling regulations. Processing teams use high-capacity blow molding machines to shape the polyethylene into rigid, impact-resistant containers suitable for corrosive and reactive chemicals, with focus on wall uniformity and weld integrity during manufacturing.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Specialist manufacturers of sealing and containment systems adopt this grade for geomembrane sheeting, leveraging its resistance to UV weathering, oxidative stress, and environmental cracking. Application settings include landfill linings, mining tailings ponds, and effluent containment, with validation testing for impermeability and chemical compatibility performed before deployment. Material blending is controlled to meet project-specific tensile and puncture resistance benchmarks.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Plastic closure manufacturers exploit the stiffness, dimensional accuracy, and food-contact safety profile of this grade in compression and injection molding of caps for carbonated beverage bottles, milk jugs, and edible oil containers. Processing relies on tight control of melt flow and cooling rates to minimize warpage and ensure tamper-evident seal functionality as required by end users and regulators.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Producers of power and telecom cables require consistent melt strength and dielectric properties for quality sheathing. This grade supports continuous extrusion in high-speed cable sheath lines, delivering chemical resistance and long service life for protective jacketing in both underground and overhead installations. Material certification covers non-corrosive and halogen-free characteristics, as demanded by international electrical codes.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Manufacturers of logistics and transport pallets utilize this resin for its high load-bearing capacity, dimensional stability, and longevity in high-circulation material handling. Injection molding operations focus on cycle time optimization and precise material metering to support production of standardized pallets and crates suitable for repeated loading/unloading in automated warehouse systems.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive LUTENE-H High Density Polyethylene (HDPE) ME1000 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8618018036652
Email: sales6@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
LUTENE-H High Density Polyethylene, model ME1000, occupies a significant place in the polyolefin landscape. Born out of decades of hands-on polymerization work, ME1000 stands as a direct result of striving for consistency, process control, and reliability. From our own shop floor to the end user, no short route exists in making a high-performance HDPE, and ME1000 is no exception. This grade fills some very demanding needs in pressure pipe, blow molding, industrial containers, and extruded profiles because of its mechanical stamina and ease of transformation.
Commercial HDPE took off owing to its outstanding strength-to-density ratio, chemical inertness, and processing latitude. ME1000 draws from the classic Ziegler-Natta route, pushing out fine granules with a predictable melt index, generally sitting near the 1.0 g/10min mark using the ASTM D1238 method. That melt index is what customers point to, time and again, as the marker for easy transformation between pipe and container lines, giving processors solid margins for error without the struggle of clogging, warping, or excessive cycle times.
We bar any fillers, extend the reaction time, and keep a close eye on ethylene purity at every reactor feed. In doing so, we create a high density matrix—density at or around 0.95 g/cm³—giving the resin high stiffness, burst resistance, and pressure handling. You'll notice the surface of extruded pipe or blow-molded goods made with ME1000: you get a clean finish, fewer micro-pits, excellent stress crack resistance. None of these are accidental. All live on the tail end of relentless process monitoring—shifts spent adjusting temperature, pressure, catalyst ratios. You cannot buy your way to these features with commodity changeovers. Every feeder and reactor needs tight attention.
Years of fieldwork show that ME1000’s character emerges most clearly in pressure piping and industrial container uses. Every engineer running a pipe line watches out for melt flow irregularities, contamination streaks, or yellowness from catalyst residues. During extrusion, ME1000 stays clear and natural, controls melt fracture, and lets you hold tolerances to tighter bands. We built this grade to take high downstream speeds, which benefits those chasing productivity in dense, repetitive operations.
City infrastructure and agribusiness both demand pipe that doesn’t crumble under steady pressure, temperature cycling, or chemical exposure. The molecular weight distribution of ME1000 is tuned toward minimizing slow crack growth. Picture a buried gas main or irrigation pipe: every notch, scratch, or batch variation is a failure point waiting to happen. With ME1000, the tough, coiled-up polymer chains resist these failures well beyond the legacy grades we used in past decades. All the same, pipe manufacturers tell us what counts most is not an impressive number on a sheet, but how cleanly the resin extrudes across long runs, how few start-stop purges it needs, and how little dust or fines they need to clear from the hoppers.
For blow molding, ME1000 keeps up its reputation in medium and large container applications — drums, barrels, automotive tanks. We see ME1000’s viscosity profile translating into stable parisons, robust wall thickness, and fewer pinch-off failures. These factors convert to directly lower scrap rates and less downtime. Some of the older HDPE grades tend to pull thin at corners or produce uneven swelling, making it tough to meet impact strength targets. By narrowing the density, molecular weight, and branching window, ME1000 sidesteps these headaches.
Plenty of HDPE grades are on the market, with overlapping specs in black-and-white. ME1000 emerges from a process mindset: repeated reactor tuning, analytic checks, feedback from conversion partners. This grade came from chasing low gels, tight pellet size, and repeatable lots. A customer’s die head clogs or the downstream lines jam if we lose focus on any of those. The performance gap grows over long production runs.
Conventional HDPE lines, especially general-purpose ones, often blend in more broad molecular weight distribution, which can make resin cheaper to produce but brings side effects, such as more flow instability during extrusion. With ME1000, we cut out the chase for wider distribution and focus our process on maintaining consistent branching and narrow dispersity. This consistency pays back in every ton shipped and every run at the customer’s side. We avoid the temptation to chase low-cost blending, instead putting every batch through a longer full-spectrum IR analysis and moisture check before shipping.
Some manufacturers cut corners by using recycled or off-spec ethylene. ME1000 always comes from virgin monomers. That policy translates into no odorous by-products and a natural resin color. Downtime from filter changes, black spots, or strange odor issues never show up in lines running ME1000. Clean resin and clean lines go together.
In the polymer field, hands-on plant experience counts more than any pitch. Skipping a microscopic OIT (Oxidative Induction Time) test or short-circuiting the sieving process for resin fines almost always comes back to haunt us on output quality. Weighing and packing ME1000 is straight from direct silo taps for minimum air and moisture exposure. Some batches have literally run straight from coolant section through to bagging within hours, with a running digital track logged for every lot. If customers report unusual pressure drops or strange melt behavior, operators can go back and trace every upstream setting, down to the last percent of catalyst addition.
Getting consistency means finding and fixing root causes inside the plant walls. Our polymer chemists learned the hard way that shortcutting cleanout periods or skipping full spectrum additive checks means runaway failures later, such as yellowing, brittle spots, or stress-cracking much sooner than expected. ME1000 always passes our in-plant pressure vessel checks at well above the minimum burst values, and each drum or pellet lot undergoes impact, environmental stress-crack resistance, and melt index checks.
No shortcuts exist in controlling gels. Running glass plate melt checks and tuning back-end reactors hour-by-hour remains the best route to keeping those gels out of customer lines. During one plant run, we tracked temperature and pressure for extruder consistency and found most gel failings stemmed from catalyst swings or minor contamination, often from the smallest seals or valve issues most don’t consider until lines slow down. Maintaining this level of oversight across every shift speaks directly to the character of ME1000.
Feedback from the ground, not just test results, shows what ME1000 does for field applications. A municipal water line dug up for inspection after years in place showed no sign of brittle fracture, swelling, or color change. These pipes—extruded from ME1000—came out with high gloss, clean wall centrality, and uniform thickness. Industrial users reported reduced failure rates at joints. Every weld and flange across a thousand-meter run held solid, surpassing requirements from industry codes.
Chemical storage tanks pose their own challenge for HDPE. Hydrocarbons, acids, and oxidizers try to leach or pit resin over time. Tank makers running ME1000 report smooth wall finish that survives repeated filling and draining cycles. Tests for environmental stress-crack resistance have shown ME1000 tanks can outperform traditional HDPE by margin of weeks, even under high-pressure surges and large temperature swings. Impact resistance stands out for this material, especially at drop points and corners, where thin-walled tanks from lower-quality grades fail.
Agricultural irrigation lines and pipe for potable water distribution see long-term exposure to sun, shifting soil, and constant flow cycling. Regular batches of ME1000 sent to field users since the early launch have stood up to harsh testing in these conditions. Checking sample cross-sections years after ground installation, there’s absence of crazing, no chalky residue, and clear molecular integrity.
Much of the difference in performance between ME1000 and other HDPEs comes from processing predictability. On a busy line, resin that can hold its profile at high output rates can mean the difference between a full shift of production and a lost day’s work. Processors talk about thermal stability—ME1000 keeps its flow without surges or cold spots, which translates into fewer purges, easy shutdowns, and better control during color or additive changes.
In the blow molding world, factories using ME1000 have been able to run longer between filter changes, with less burnt material making it to the finished product. Cycle times for bottling, especially at larger container sizes, often see a tangible reduction—sometimes by five percent or more—since the melt flows with fewer occlusions and more stable viscosity than broader-molecular grades. This feeds directly into real yield and cost efficiency: less scrap, more finished goods, and fewer spoiled batches.
We’ve had processors report back on how shifting from a generic HDPE to ME1000 translates not only into better output numbers but also cleaner equipment, less unscheduled maintenance, and steady product quality that wins repeat buyers. Every reduction in downtime, waste, or reprocessing pushes the whole operation forward.
Competition always exists with alternative HDPE grades and, at times, with resins tweaked for either higher stiffness or more flexibility. Choosing a resin often means picking between cost, processability, and durability. Where our ME1000 stands apart comes down to how it threads the tightrope between process flexibility and finished part strength. Cheaper HDPEs sacrifice high-pressure and slow crack resistance or fade quickly in outdoor applications.
Some resins—sometimes imported at lower price points—come with more broad molecular weight to push higher throughput but bring unpredictable behavior during extrusion and lower final product strength. The downstream effect isn’t just lab test numbers: it’s more downtime, more customer complaints, and higher cost in repairs and replacements. Processing lines running on ME1000 report significantly lower rates of repair and field failures, and over time, fewer lot-to-lot performance swings compared to other grades.
Application engineers acknowledge that in long pipeline projects or major blow-mold installations, changing a grade can upend entire process flows. Feedback from field use keeps pushing us to build ME1000 with stability and repeatability in mind above every secondary feature. This thinking came after working with pipe and tank processors who pointed out that tiny changes in melt flow or pellet structure would require full parameter checks and often expensive retraining of staff just to maintain quality. By staying consistent with ME1000, such recalibration downtime simply doesn’t stack up in the first place.
Experience teaches that durability never comes from a single property or spec; it comes from refusing shortcuts at every stage of polymerization, compounding, and pelletizing. From lab bench to full-scale production, every batch of ME1000 cycles through property checks—impact, ESCR, melt index, density—because we know one outlier can set off a cascade of problems all the way down a customer’s line.
We’ve been called in to troubleshoot failures traced to resin blends that try to balance price against performance. In each of those cases, the shortfall always comes back to inconsistent resin microstructure or contamination. Dust and fines ruin hopper flow. Minor composition variations cause weak spots under pressure or wind up as unseen stress points that crack over time. ME1000 avoids that trap by sticking with a tight, documented formula, strict process isolation, and an obsessive approach to traceability and batch testing.
Manufacturing for real-world resilience means treating ME1000 not as a commodity but as an engineered product built with the expectation that pipe, containers, or tanks made from it are going to put up with years of abrasion, impact, and environmental cycling. Customers who’ve moved to ME1000 regularly report fewer callback cases, stronger guarantees, and a higher level of product reliability in field audits.
Questions about the environmental footprint and sustainability of HDPE never leave the conversation. ME1000, produced from virgin ethylene with closed-system water cooling and solvent recycling, achieves improvement not just in process efficiency but also in cleaner effluent streams. Every effort is put into reducing emissions, minimizing waste, and ensuring that off-spec resin doesn’t enter the finished product line.
Processors running ME1000 often report fewer cleanouts and lower energy consumption, as the resin’s processability translates into reduced heating and extrusion times. Over the lifecycle of a product—especially pipes buried for decades or tanks used in corrosive environments—the lower failure rates and fewer replacements create a genuine offset against total resource use.
We keep hearing from partners and downstream users that a practice of maximum traceability, feedback, and continuous training makes the difference over mere cost or theoretical sustainability. That’s why ME1000’s success grows not from marketing but from honest performance data and less waste at every point, from pellet to product to eventual recycling.
Nothing stays still in polymer chemistry. Plant chemists and process engineers working with ME1000 pay daily attention to catalysts, feedstock changes, and additive innovations. Every cycle of improvement—a switch to lower-residue catalysts, better degassing, more robust additive blends—feeds back into making ME1000 perform better under field conditions. Direct contact with processors and users drives our adjustment cycles. They tell us what’s working and what isn’t long before a specification table could.
What gets overlooked in chemical manufacturing are the people and systems behind each batch. Our operators, often with a decade or more at the plant, spot the subtle differences in pellet appearance, melt flow, or odor that hint at system drift. Training programs focus not just on process but on detecting and correcting the minute signals that precede any significant resin deviation. ME1000 is not a random success but a deliberate, people-driven result.
We invest in R&D on next-generation initiators, more precisely dispersed nucleating agents, and advanced process monitoring in order to take ME1000 into new frontiers, like gas barrier layers, multilayer pipe, and even specialty blow molding. The same backbone of careful process design, strict material selection, and relentless field feedback underpins every improvement.
Years of real-world use, not just test lab numbers, have written the story of ME1000. Customers bring their toughest extrusion, blow molding, and pipe laying challenges—and time after time, ME1000 carries the load with little drama and minimal surprises. Reliable and consistent resin matters: every extra failure, slow batch, or field rework takes money and confidence out of the system.
ME1000 does not trade durability, strength, and chemical resistance for a few process shortcuts or savings on the day of purchase. Sales rise because field reality backs up the promise batch after batch. We keep learning, auditing, tuning, and adjusting to make sure it stays that way. There’s pride—and old-fashioned manufacturing grit—in every ton of ME1000 we produce, knowing it stands up inside city water pipes, chemical tanks, agricultural lines, and storage containers around the world.