| HS Code | 398620 |
| Product Name | LUPOL Polypropylene (PP) R6400 |
| Manufacturer | LG Chem |
| Polymer Type | Polypropylene Homopolymer |
| Melt Flow Rate | 50 g/10 min (230°C/2.16kg) |
| Density | 0.9 g/cm³ |
| Tensile Strength At Yield | 35 MPa |
| Elongation At Break | 10% |
| Flexural Modulus | 1550 MPa |
| Heat Deflection Temperature | 108°C (at 0.45 MPa) |
| Vicat Softening Point | 154°C |
| Applications | Injection molding, general-purpose parts |
As an accredited LUPOL Polypropylene (PP) R6400 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | LUPOL Polypropylene (PP) R6400 is packaged in 25 kg white, woven plastic bags featuring printed product details and manufacturer branding. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL) for LUPOL Polypropylene (PP) R6400 typically accommodates about 17–19 metric tons, packed in 25kg bags. |
| Shipping | LUPOL Polypropylene (PP) R6400 is typically shipped in 25 kg bags or bulk containers. It should be transported in dry, clean, and covered vehicles to prevent contamination and moisture ingress. The product should be handled carefully to avoid physical damage and stored in a cool, ventilated area away from direct sunlight. |
| Storage | LUPOL Polypropylene (PP) R6400 should be stored in a cool, dry, and well-ventilated area, away from direct sunlight and sources of heat or ignition. Keep the material in sealed, original packaging to prevent contamination, moisture absorption, and dust accumulation. Avoid stacking heavy loads on top of bags to prevent deformation. Ensure proper labeling and follow local regulations for polypropylene storage. |
| Shelf Life | LUPOL Polypropylene (PP) R6400 typically has an indefinite shelf life if stored properly in cool, dry, and shaded conditions. |
LUPOL Polypropylene (PP) R6400 serves as a key raw material in demanding industrial sectors, supplying the specific processing performance, mechanical strength, and compliance profile required for high-volume downstream operations. Our focus as the original manufacturer is on industrial applications with established demand and regulatory frameworks.
Automotive suppliers utilize this polypropylene grade for manufacturing glove compartment assemblies, center consoles, instrument panel substrates, and interior trim parts. In these applications, processors depend on the material’s balance of impact strength and flowability along with its suitability for textured and painted surfaces. Quality control focuses on low VOC emissions and consistency in appearance critical to automotive standards.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Appliance OEMs require polypropylene resins that provide high dimensional stability, heat distortion resistance, and compatibility with insert molding, overmolding, and complex joining techniques. LUPOL R6400 delivers proven performance in the production of white goods housings, small home appliance cases, and internal structural supports that must meet electrical and flammability standards.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Rigid food packaging producers choose LUPOL R6400 due to its clean migration profile and processability in thin-wall container manufacturing. The material provides food-safe packaging that sustains mechanical integrity under hot filling and retort conditions, essential for ready meals, dairy, and takeaway packaging that must comply with international food safety frameworks.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Manufacturers of lead-acid and lithium-ion battery housings require polypropylene grades with outstanding chemical resistance and dimensional consistency to withstand aggressive electrolytes and tight assembly tolerances. LUPOL R6400 meets specialized requirements for impact-modified, acid-resistant cases and covers for automotive, stationary, and backup batteries.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Medical-grade converters rely on this polypropylene for molding device housings and disposable components such as syringes, IV connectors, and laboratory test kit parts that must deliver sterility, low extractables, and reliable biocompatibility. This grade supports high-cavity mold production for large-scale single-use medical disposables under certified quality environments.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Outdoor and agricultural machinery manufacturers specify polypropylene for exposed engine covers, fuel tank guards, and various protective housings, where mechanical durability in temperature extremes and UV stability are critical. The formulation supports cost-effective, large-part molding and field-proven impact strength over seasonal cycles of use.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive LUPOL Polypropylene (PP) R6400 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8618018036652
Email: sales6@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Manufacturing often places more demands on materials than many realize. Consistency and efficiency shape the backbone of every production run. Working with polypropylene spans decades in this industry, each product telling a story of trial, refinement, and re-evaluation. LUPOL Polypropylene (PP) R6400 stands out among the masses of resins moving through our lines, not because of a marketing slogan, but due to the way it meets challenges that the "standard grade" polypropylene can’t tackle well.
PP R6400 takes on a unique role in our portfolio. It offers an ideal melt flow rate that supports both injection molding and high-speed thin-wall processes, which manufacturers appreciate once the demand for better cycle times becomes impossible to ignore. We see factories pushing the limits of their equipment—molders increasing shot counts per day, packaging plants trying to shave a second or more from every cycle. Here, R6400 quietly makes itself known by flowing precisely as expected under pressure and temperature swings, setting it apart from generalized or commodity PPs that often create unpredictable surges and sags in output.
With an average melt flow rate that typically lands in the 40–45 g/10min range—measured by ISO 1133—this grade does not buckle under the higher shear rates that accompany modern high-speed tools. Operators switching over from multi-purpose polypropylenes tend to notice a significant drop in stuck parts and fewer splay marks, which points straight to the resin’s stability and clean separation on ejection. Less downtime and scrap translate to less frustration and a thinner line between planned and real yield.
On the factory floor, product specifications only tell part of the story. What matters more surfaces during a week of actual production. R6400 helps meet the soaring demand for lightweight, yet tough packaging. Its balance of stiffness and impact resistance gives it a performance curve well suited to thin food containers, yogurt cups, houseware lids, disposable laboratory wares, and closures. There is less warping; demolding proceeds at pace; dimensions remain tight even with aggressive cooling regimes. In the food packaging field, the pressure to switch between resin batches comes from both hygiene and batch traceability requirements. With PP R6400, changeovers happen quickly, with little variance between lots.
Concerns about clarity and gloss arise when polypropylene goes head-to-head with other plastics such as PET or polystyrene. R6400’s semi-crystalline makeup prioritizes toughness and manufacturability over glass-like transparency. It gives a slight opacity—something customers in foodservice and medical disposables have found to be acceptable or even desirable, as it conveys strength and reliability. We have seen years of steady production for brands that stick with this specific grade after extensive in-house testing failed to reveal gains from pricier “clarified” options, especially in thin-wall or rapid-cycle applications.
The nuances of compounding and additive compatibility become apparent when colorants, UV inhibitors, or antistatics are mixed in—nobody wants to run a resin that fights back against modifiers. R6400 accepts a wide variety of masterbatches without creating unwanted streaks or patches. We learned quickly that this is not universal across similar polypropylene grades; some resist color uniformity, while others show drop-off in impact performance once loaded with functional additives. R6400 holds its mechanical properties better through the cycle of mixing, melting, and trimming, which means fewer technical complaints trickle back from end users or downstream printers.
Recyclers depend on predictable melt behavior for reprocessing, especially as sustainability pressures mount. Our feedback loops with reprocessors confirm that reject rates stay low after running R6400, whether pellets are used on their own or blended with post-industrial regrind. The polymer resists yellowing, even across multiple heat histories. That fact alone has prompted larger buyers to standardize on this single type for both virgin and recycled-content products, simplifying batch certification and regulatory compliance, especially in food and consumer goods.
Observation across multi-year runs reveals where PP R6400 sets itself apart from standard PPs. Many resins struggle with dimensional shift during cooling (shrinkage) that leads to unpredictable product fit. Mold makers often recalibrate tools after switching between lots or suppliers. In our hands, PP R6400 shows consistent shrinkage rates. This results in predictable, repeatable mold movements, sharper corners, and better stacking of finished containers or parts.
Consistency in molecular weight distribution supports cleaner trimming, less dust generation, and sharper parting lines. This single trait means less clean-up, lower filter plug risk, and smoother operation for secondary processes, such as ultrasonic welding or automated labeling. Patterns of flashing or incomplete shot fill—more common with general-purpose resins—simply don’t show up to the same degree with R6400, as demonstrated in a wide body of case notes from both in-house and customer trials.
Food safety sits squarely on every production manager’s daily checklist. R6400 supports compliance with FDA and EU food contact regulations (such as EU No. 10/2011)—something we validate with every batch. We run migration studies in relevant simulants as part of our quality control protocol, because downstream traceability depends on having the right documentation ready for audit, not just for the big players but for mid-tier and local processors as well. Maintaining robust batch records and ensuring that every outgoing shipment meets global compliance cut down on the risk of line stoppages during audits and certification checks.
Certifications and third-party audits do more than line the office wall. They test our ability to manage documentation, analyze migration results, and demonstrate GMP control in PP production. R6400 has passed periodic quality and food safety audits from independent agencies, information we share openly with downstream users. Unlike commodity resins produced in cycles for spot market supply, R6400’s manufacture sticks to recipes and tracking protocols that avoid batch mixing or off-spec blending.
As chemical manufacturers, pressure comes both from the process side and the customer end. What we appreciate about PP R6400 is not a high-gloss sales pitch but the way it helps stabilize our line efficiency. Each step from polymerization to pelletizing to downstream blending benefits from R6400’s solid handling properties. It cuts down on silo bridging, powdering, and fines that lead to dust-related quality rejects. Material handlers report fewer headaches in conveying the resin from storage to the hoppers—even in climate conditions that typically disrupt flow. Maintenance logs show less need for frequent cleaning or filter changeouts, which improves uptime for everyone down the chain.
Customer feedback often highlights the trouble with odor carryover in some grades of polypropylene, especially in food-contact and medical settings. R6400’s manufacturing process controls volatile residuals tightly—dumping in less off-odor, less residual monomer, and reducing the risk of taste or smell problems in the finished goods. As a producer, we maintain rigorous controls over feedstocks and process conditions, running regular lots through sensory testing to ensure the delivered resin comes as pure and neutral as intended.
Industry pressure to move away from “single-use” attitudes means bulk resin choices matter almost as much as product design. R6400 flows not only through virgin material supply lines, but also supports success in closed-loop reuse and recycling systems. Formulators building high-reuse containers, or processors using PCR-blended masterbatches, have documented that PP R6400 retains its performance characteristics after secondary melting. Unlike many earlier commodity grades, it does not break down rapidly in melt flow or toughness after typical recycling cycles. Finished products keep their utility and strength across batches, extending use beyond just the “first life” packaging or component.
Customers in regions where recycled-content mandates have gone from “pilot” to everyday requirement see real value in this aspect. State or national rules that require minimum recycled content in food packaging place a premium on polymers that can bridge the gap between new and secondary material without a dip in sealing, appearance, or performance. As regulatory frameworks tighten, the role of a versatile, recycling-friendly polypropylene grade gains significance. R6400 is one of the few grades that has already proven itself compatible with a range of PCR streams—saving converters from excess downtime or unpredictable quality swings as regulatory landscapes keep evolving.
In-house trials regularly test the limits of what injection molding, thermoforming, and sealing lines can deliver. PP R6400 has responded by working for new thin-wall applications where heat distortion temperature and impact strength need to hit a sweet spot. Our engineers no longer chase down unexplained warping or edge cracking; process optimization comes easier. Equipment upgrades—like replacing induction heaters or high-speed extruders—further amplify R6400’s built-in advantages, since it’s designed for rapid cycles and reduced energy needs. Customers pushing for the slimmest, most resource-efficient products have found that the resin pairs cleanly with newer technologies, extending its use into lightweight trays, shrink-fit lids, and laboratory packaging. The feedback comes from the plant floor, not just a lab bench, making operators and technicians prime drivers of adoption.
Not all polypropylene grades behave the same in real-world conditions. We’ve run many side-by-sides and long-term trials comparing R6400 to both general-purpose grades and specialized impact-modified variants. Most notable is how well R6400 holds up under pressure—both physical and operational. Consistency of pellet shape and size means fewer feed problems. Its reliable flow supports intricate, thin-walled geometries without creating hot spots or fill issues in molds designed for cost-efficient mass production.
Desire for toughness in high-speed lines often forces trade-offs in chemical resistance or electrical performance. R6400 threads this needle by retaining PP’s general resistance to acids, bases, and oils while also offering surface properties necessary for labeling, printing, or downstream metallization. End-users producing decorated packaging or medical tools notice this difference most—labels stick well, inks cure crisply, and part surfaces resist bloom or haze longer than less refined resins.
Traceability is a daily priority in both our operations and those of our downstream processors. Batches of R6400 receive unique identification from polymerization through granulation, ensuring every lot moving through the supply chain can be traced back to core process parameters. Product managers auditing supply know exactly where the resin started, how it was compounded, and under what conditions it was stored and shipped. Electronic data collection on the plant floor supports compliance, recall readiness, and continuous improvement programs, all with the aim to protect users and address root causes quickly when anomalies do arise.
Safety on the shop floor improves as well. Less dust, better pellet integrity, and reduced static—each small advantage adds up to fewer slips, less chance of inhalation or ignition hazards, and less time spent troubleshooting minor irritations. Our team takes pride in knowing that real manufacturing concerns get addressed with practical, field-tested solutions, not just short-term fixes or theoretical savings.
Demand for polypropylene continues to surge, not only in traditional applications but in new areas like electric vehicle components and rechargeable battery casings. PP R6400’s history includes successful production trials with non-food, high-durability consumer goods, where dimensional stability and predictable resistance to heat and chemicals are critical. Collaborations with added-value customers push the boundary for what’s possible in lightweight, tough, clean resin technology.
Waste handling and environmental certifications are hot topics. The switch to R6400 allows more plants to move toward ISO 14001 or similar environmental management benchmarks, as it reduces cleaning chemicals, trims energy usage via faster cycles, and helps keep on-spec production rates up. This isn’t just about ticking checkboxes—every real reduction in waste or scrap means greater profitability and less environmental impact. Customers and auditors can examine the life cycle data and see credible, incremental improvements all the way from pellet production to landfill diversion.
The journey from raw polypropylene to finished goods always presents new challenges. Our experience with R6400 spans everything from routine mass packaging runs to custom jobs for sensitive or regulated clients. Years of process improvement, troubleshooting, and direct end user feedback continually shape how we refine both production and support for this grade. Our own crews in polymerization, extrusion, and QC play as big a role as our customers' machine operators and quality managers. Open feedback loops and willingness to trial, document, and adapt processes have kept R6400 in front of shifting market demands. We don't just rely on lab data to make decisions—we take actual performance on real equipment, in real climate, with real customer deadlines in mind.
Material choices in manufacturing rarely get simpler, with shifting consumer demands, industry standards, and tightening environmental regulations. Up and down the chain—from bulk resin storage to finished pack-out—PP R6400 continues to offer practical, field-proven answers to actual production headaches. Whether it’s running at higher speeds, surviving repeated sterilization, or supporting food-safe operations, R6400’s record stands on the consistent feedback of people who use it every day.
Our experience as the manufacturer, working hands-on with thousands of tons produced and shipped, supports the conclusion that real-world reliability and processability will always beat theoretical advantage. As both internal operators and partners with leading converters and brands, we plan to keep PP R6400 a key option for companies looking to maximize their efficiency, safeguard their end product, and adapt flexibly to the next wave of needs from regulators and the marketplace alike. For those searching for a workhorse resin that stands the test of daily production, PP R6400 continues to earn its place at the center of successful operations.