LG Chem, Ltd

Products

LUCENE Polyolefin Elastomer (POE) LC175

    • Product Name: LUCENE Polyolefin Elastomer (POE) LC175
    • Chemical Name (IUPAC): Poly(ethylene-co-octene)
    • CAS No.: 009063-29-0
    • Chemical Formula: (C2H4)x(C3H6)y
    • Form/Physical State: Pellets
    • Factroy Site:
    • Price Inquiry: sales6@ascent-chem.com
    • Manufacturer: LG Chem, Ltd
    • CONTACT NOW
    VTB
    Specifications
    HS Code 281273
    Product Name LUCENE Polyolefin Elastomer (POE) LC175
    Manufacturer LG Chem
    Material Type Polyolefin Elastomer (POE)
    Density 0.870 g/cm³
    Melt Flow Rate 3.5 g/10min (190°C/2.16kg)
    Hardness 60 Shore A
    Tensile Strength 11 MPa
    Elongation At Break 750%
    Flexural Modulus 35 MPa
    Vicat Softening Point 33°C
    Melting Point 55°C
    Clarity Excellent
    Applications Film, wire & cable, automotive parts

    As an accredited LUCENE Polyolefin Elastomer (POE) LC175 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing LUCENE Polyolefin Elastomer (POE) LC175 is packaged in 25 kg white plastic bags featuring blue branding and product labeling.
    Container Loading (20′ FCL) **Container Loading (20′ FCL):** LUCENE Polyolefin Elastomer (POE) LC175 is loaded approximately 16 metric tons per 20′ FCL, packed in 25kg bags.
    Shipping LUCENE Polyolefin Elastomer (POE) LC175 is typically shipped in 25 kg polyethylene bags, palletized and shrink-wrapped for stability and protection against moisture and contamination. Bulk shipping options in containers or supersacks may be available upon request. Ensure storage in a dry, well-ventilated area, away from direct sunlight and incompatible materials.
    Storage LUCENE Polyolefin Elastomer (POE) LC175 should be stored in a cool, dry, and well-ventilated area, away from direct sunlight and sources of heat or ignition. Store in original, tightly sealed containers to prevent contamination. Avoid exposure to strong oxidizing agents. Recommended storage temperature is below 50°C. Ensure proper stacking to avoid damage. Keep away from incompatible materials and moisture.
    Shelf Life LUCENE Polyolefin Elastomer (POE) LC175 typically has an indefinite shelf life if stored in cool, dry conditions, away from sunlight.
    Application of LUCENE Polyolefin Elastomer (POE) LC175

    Applications of LUCENE Polyolefin Elastomer (POE) LC175 in Industrial Manufacturing

    LUCENE POE LC175 enables advanced material engineering in several demanding industrial sectors. Our factory-grade POE supports high-performance plastic modification, wire and cable production, automotive parts, footwear manufacturing, and multilayer film compounding, among other focused downstream applications. Below, we detail genuine, major use cases based on direct user integration, relevant regulatory standards, and established processing practice.

    1. Flexible Packaging Film Modification

    Film manufacturers turn to LC175 to address impact performance and sealability challenges in multilayer polyethylene and polypropylene food packaging films. It modifies mechanical properties, enhances clarity, and improves puncture resistance for fast-moving consumer packs and industrial liners, resulting in consistently reliable product protection and longer shelf life during distribution.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    2. Wire & Cable Sheathing and Insulation

    Electric cable producers use LC175 to improve low-temperature flexibility, surface smoothness, and stress crack resistance in crosslinked polyethylene (XLPE) and polyolefin jacket compounds. The elastomer allows cables to maintain mechanical strength while facilitating easy peeling and extended outdoor use, especially in industrial and construction-grade wiring.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    3. Automotive Thermoplastic Olefin (TPO) Compounds

    Tier 1 auto-parts companies rely on LC175 to balance stiffness and ductility in TPO systems for vehicle interiors and exterior trim. It helps manufacturers meet impact requirements for dashboards, bumpers, and instrument panels, while providing processability compatible with mass-production injection molding lines and powder coating steps.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    4. Footwear Sole Compounds

    Major footwear manufacturers introduce our material into thermoplastic EVA or polyolefin-based sole compounding lines to increase rebound, weatherability, and elongation-at-break. This approach supports mass production of injection-molded outsoles and midsoles engineered for sports, safety, and children’s shoes.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    5. Impact-Modified Polypropylene Compounds for Household & Industrial Goods

    Producers of rigid consumer goods, storage totes, and small appliance housings employ LC175 to raise impact strength and stress-whitening resistance in talc or calcium carbonate-filled polypropylene matrices. The elastomer allows higher filler loading and helps retain ductility during low-temperature drop tests, de-risking manufacturer QC and post-molding decoration or assembly.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    Free Quote

    Competitive LUCENE Polyolefin Elastomer (POE) LC175 prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.

    We will respond to you as soon as possible.

    Tel: +8618018036652

    Email: sales6@ascent-chem.com

    Inquiry

    Get Free Quote of LG Chem, Ltd

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    LUCENE Polyolefin Elastomer (POE) LC175: Direct Insights from the Manufacturer

    Understanding LUCENE LC175 from Our Production Floor

    For years, our team has worked hands-on with polyolefin elastomers, and the LC175 model stands out among the LUCENE series. This product didn’t emerge overnight. LC175 went through countless pilot trials, in-house development meetings, and performance checks before we packed the first bag for shipment. The resin has become a regular fixture in our workshops, often at the center of discussions on extrusion optimization and toughness enhancements in customer applications. Workers walking the extrusion lines recognize LC175 for its dust-free pellets and the way it handles during charging—a detail that matters to operations where every interruption drives up costs.

    LC175: Resin Design Grounded in Manufacturing Experience

    From the start, we understood that what end users call flexibility, we call stress balance. The flexibility in LC175 isn’t just about the basic polymer backbone—it’s about controlling comonomer selection, catalyst purity, and reaction temperature to deliver a final product without unpredictable soft spots or weak zones. Years in the reactor unit taught us that inconsistency in melt index doesn’t stay hidden. With LC175, every lot undergoes strict melt flow analysis and gel tests, traced to our reactors and modifier inputs. Looking at polymer chains under the microscope, our engineers focus on branching design and density control—not in theory, but in what our reactors produce, batch after batch.

    Application Lessons from Real-World Customers

    The LC175 finds its way into film lines, hot melt adhesives, impact modifiers for polypropylene, and wire & cable. Each of these markets showed us where old formulas broke down. On blown film streams, we’ve run side-by-side comparisons with LC175 versus traditional ethylene-octene copolymers and older EVA types. Film converters sent feedback after full shift runs on our trial coils, pointing to the blend compatibility and the resilience of LC175’s low-density branches, especially under high draw rates and lower extrusion temperatures. With adhesives, our technical team works directly with compounders, tracking pot stability and creep resistance shifts. We push LC175 through HAAKE mixers, measure peel values, and check viscosity drift after extended dwell times. In polypropylene impact modification, injection molders report not just better cold temperature drop tests with LC175, but easier coloring and smoother surface finish on parts.

    Model Specifics: From Lab to Loading Dock

    For us, LC175 isn’t just a SKU—it comes with a backstory. In the production plant, we target a melt index range that supports consistent pelletizing and doesn’t clog screens. Actual values for LC175 balance processability with physical property retention. We run FTIR checks and DSC measurements before every wide-release batch, catching subtle drift in density or comonomer level. The product comes in pellet form, tested against dust and granule fines, so operators don’t get flyaway waste or unexpected contamination in gravimetric feeders. A lot of effort goes into keeping organoleptic properties neutral for suppliers making medical or food contact films. Every milestone—pilot scale-up, production ramp, shipping trials—reflects real concerns of production managers and quality inspectors.

    Comparing LC175 to Competing Elastomers: A Practical View

    Compared to other grades on the shelf, LC175 set new expectations in our shop. Traditional POEs and EVA blends showed recurring issues: haze in film, poor compatibility at high loadings, and instability in extended thermal cycles. The LC175 formulation targets those gaps. We see less blocking on winders, which matters for film rolls headed to converters. In hot melt adhesives, lower volatility keeps applicators cleaner, and the consistent MI helps production planners avoid sudden line stoppages. Customers switching from EVA grades often mention less odor at elevated process temperatures. Where some POEs lose tensile strength in thin gauge parts, LC175’s density control gives more leeway, especially in demanding geomembrane or automotive trim uses.

    We’ve run direct blend trials, mixing LC175 with linear low-density polyethylene and injection grade PP, noting better stress-crack resistance and improved tear propagation in finished parts. Not every project goes perfectly, though—very soft segments in rival copolymers sometimes migrate or bloom under heat, a problem we rarely find in LC175, thanks to a proprietary catalyst system that the R&D team refined over multiple scale-ups.

    Supporting Real Manufacturing Challenges

    It’s one thing to make a resin pass lab tests; it’s another to fill shipping containers for seasonal peaks without batch drift. We use twin-screw extruders for pelletizing, equipped with inline vision systems, not just relying on offline inspection reports. Our production crew steadily checks for pellet uniformity—operators know that one out-of-spec granule can jam feeders downstream. Moisture control gets constant attention, especially during humid months. Boxes and bags get sealed with extra care, respecting the lessons from shipments held up in port warehouses.

    Domestic customers sometimes push LC175 through legacy single-screw units, where variations in melt index lead directly to problems. Our field technicians visit these plants during commissioning, working hands-on with maintenance teams. Issues around feed friction, resin bridging, or injection molding gate freeze-offs get worked out in real time, giving direct feedback for future production runs. These site visits underline where processable, block-resistant pellets like LC175 mean fewer workarounds and downtime.

    Quality Assurance: Not Just Test Reports

    In any resin plant, quality assurance involves more than statistical process control. LC175 batches come with tracked lot histories, keeping every adjustment tied to source material scans. Rapid detection tools flag deviations not caught by standard tests—off-odors, minor gels, or off-color specks. Adjustments get made right on the production line, not down the hall in a remote lab. We’ve invested in high-throughput GPC (gel permeation chromatography) and embedded NIR (near-infrared) systems, to give technicians real-time information on composition. With high-moisture weather, extra drying cycles and packaging checks become the rule, not the exception.

    LC175 shipment records and performance claims match up, because oversight here comes with production pride and hands-on troubleshooting. Feedback from repeat orders, seasonal returns, and new plant expansions all get logged and discussed at production meetings. Our technical service group uses these details to close the loop between plant and end-user—faster than any external distributor or trading house can offer.

    Environmental and Regulatory Confidence

    Customers often ask about environmental reliability, and LC175 draws on years of compliance testing. We’ve submitted the resin for analysis under regional food contact and ROHS standards, running outgassing and heavy metal scans using third-party labs. This diligence cuts down on regulatory headaches later, especially as many of our customers ship finished goods globally. Our records keep traceable links from raw material delivery through resin shipment, so unexpected recalls or claims don’t catch us off guard. LC175 gets periodic reinterpretation as standards change, and our teams regularly tweak inputs to align with new chemical stewardship demands.

    Sustainability pressure keeps growing. LC175 benefits from process intensification steps at our site—lower reactor temperature windows, catalyst recycling, and better process gas recapture keep emissions down. Engineering projects cut waste from pelletizing, using real-time scanning to divert nonconforming material before it hits the bagging line. Takeback programs for off-spec pellets reduce landfill impact, working hand-in-hand with select regional partners. The resin’s consistent pellet form works well with closed-loop blending, so customers facing VOC limits or downstream QA audits have fewer hurdles.

    Working with Supply Chain Realities

    Fielding LC175 isn’t just about polymer chemistry. Shipping, storage, and restocking make up half the battle. Our warehouse teams run periodic inventory audits, flagging issues with bag deformation and label legibility. Static discharge risks get minimized with specific anti-blocking agents built into the pellet, and dry-air logistics prevent caking under variable warehouse conditions. Real production records drive our forecasts, not guesswork—peak orders for LC175 often happen at short notice, and maintaining on-time delivery takes more than a checklist.

    Importers and multinational customers dealing with variable customs rules value our production documentation and clean shipping documents. LC175 buyers in warmer climates appreciate the stability of the resin in uncooled storage, though we always advise basic warehouse ventilation. For the supply chain staff, clear barcoding and lot traceability on every LC175 bag matter, reducing confusion during high-volume receiving and dispatch windows. If an issue shows up on the dock—scuffed packaging, wrong batch, or incorrect stack—our staff sort it out before it becomes a customer headache.

    Problem-Solving from Feedback and Continuous Improvement

    Every major product line evolves from criticism. LC175 has faced its share of questions: Does it blend evenly with masterbatch concentrates? Does it survive long-term sun exposure? In the past two years, we’ve supported hundreds of formulation tweaks under customer labs, gathering direct blend data and UV resistance tracking from third-party test houses. Film manufacturers reported fewer die lip buildup issues at high loading rates, meaning less line downtime. Injection molders pointed to improved impact strength, but sometimes asked for better color acceptance, which pushed us to fine-tune the purity of comonomer streams and add more in-line mixing steps.

    Our technical group logs every customer complaint, from sticking pellets to melt filter fouling, and brings complaints straight onto the plant floor. Engineers then tweak reactor profiles or blend settings and return with small-batch proofs to check if the fix holds up. This cycle keeps LC175 moving forward—not chasing perfect specs, but meeting the real-life needs of operators and plant managers.

    Where We See LC175 Heading Next

    Polyolefin elastomers face fast-changing markets. Packaging buyers ask for consistent seal strength at narrower gauge. Appliance makers want regrind compatibility without loss of performance. Hot melt formulators look at resin purity as a differentiator, especially for high-speed packaging. All these requests shape how we keep tuning LC175’s production runs. Our development group reviews macro trends, but also reads every small-scale plant report to spot emerging demands.

    Machine manufacturers setting up new film and molding lines often invite our engineers to site trials, where we supply LC175 in test quantities and monitor shrinkage, clarity, and physical strength as the new line ramps up. Recommending optimal temperature and pressure profiles for LC175 comes not from datasheets, but from hours logged by our support staff wrestling with screw designs and die head settings. If toolmakers want less die buildup or consistent pellet drop, we talk through resin pellet shape and lubricity, then share results for others to see.

    Beyond the Plant: Sharing Know-How with End Users

    Experience with LC175 doesn’t end at the factory gate. Every field visit, training seminar, and troubleshooting session with buyers becomes new guidance for the next batch. We stay in touch with extrusion supervisors, compounders, and maintenance leads—this feedback rounds out the story of the resin. When operations teams ask why LC175 runs with fewer surges or demands less downtime for cleaning, our site engineers can share specifics about resin behavior under pressure and heat.

    We also maintain training packs and application notes based on daily work at extrusion lines and molders’ shops. These resource sheets walk operators through best practices—silo drying, material handling, and purge routines—making a real difference in production uptime. For customers sending products into high-risk uses (such as medical tubings or protective films), our history of successful audits and zero-defect claims with LC175 gives real assurance, not just marketing.

    Closing the Loop: Why LC175 Fits Today’s Demands

    The LC175 serves industrial customers looking for reliability, not experiments. Feedback over years highlights its consistent performance, backed by direct plant support and responsive quality tweaking. Line operators talk about fewer unexplained shutdowns, maintenance techs see less residue in hardware, and product designers gain more formulation flexibility without trade-offs in impact or seal strength. Customers facing strict supply chain or regulatory reviews see the value in knowing exactly what’s in every shipment, with documentation to match.

    Every bag of LC175 captures the accumulated learning of every plant incident, customer meeting, and technical improvement—this makes the resin a benchmark for us and a steady choice for manufacturers needing more than a standard elastomer. LC175 is not a perfect fit for every blending or molding context, but its track record and the readiness of our technical support keep it ranked high among modern POEs. Direct, practical experience drives every variation, every support call, and every order we fill.

    Resources and Collaboration

    End-users of LC175 gain direct access to our field engineers and process specialists. Resource sharing—such as tailored screw design guides, troubleshooting sheets, and periodic in-plant training—remains part of our approach to long-term supply partnerships. As processors’ equipment, regulatory pressures, and market requirements change, we expect LC175 to evolve along with them—reflecting not only polymer science but also the realities of daily industrial operation, competitive supply chains, and rising demands for compliant, reliable raw materials.