| HS Code | 525975 |
| Product Name | LUPOL Polypropylene (PP) P000003C |
| Manufacturer | LOTTE Chemical |
| Polymer Type | Polypropylene Homopolymer |
| Melt Flow Index | 3 g/10min (230°C/2.16kg) |
| Density | 0.91 g/cm3 |
| Tensile Strength | 35 MPa |
| Flexural Modulus | 1500 MPa |
| Elongation At Break | 10% |
| Vicat Softening Point | 152°C |
| Heat Deflection Temperature | 120°C (0.45MPa) |
| Color | Natural |
| Typical Applications | Injection molding |
As an accredited LUPOL Polypropylene (PP) P000003C factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | LUPOL Polypropylene (PP) P000003C is packaged in 25 kg white plastic bags, clearly labeled with product details and manufacturer information. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL) for LUPOL Polypropylene (PP) P000003C typically holds about 24 metric tons, packed in 25 kg bags. |
| Shipping | LUPOL Polypropylene (PP) P000003C is shipped in standard moisture-proof, multi-layered bags, typically weighing 25 kg each, or in bulk containers for large volumes. Shipments are securely palletized and shrink-wrapped to prevent contamination and damage, ensuring safe and efficient transportation by road, sea, or air according to regulatory requirements. |
| Storage | LUPOL Polypropylene (PP) P000003C should be stored in a cool, dry, and well-ventilated area, away from direct sunlight and heat sources. Keep the material in its original packaging, tightly closed to prevent contamination and moisture absorption. Avoid exposure to strong oxidizing agents and extreme temperatures to maintain product quality and performance. Store at ambient temperatures and off the ground. |
| Shelf Life | LUPOL Polypropylene (PP) P000003C typically has a shelf life of 2 years if stored unopened in cool, dry conditions. |
LUPOL Polypropylene (PP) P000003C supports diverse industrial sectors through its controlled molecular weight, high processability, and consistent physical properties. Below, we outline main value chains utilizing this grade, with detailed insight into integration requirements and output specifications.
Automotive manufacturers select this PP grade to achieve durable, lightweight interior components. Injection molding lines utilize the pelletized form due to rapid cycle times, dimensional consistency, and balanced impact strength. In instrument panels, consoles, door trims, and pillar covers, this PP permits reliable aesthetic surface finishes and long-term color stability under UV. Process control systems monitor melt flow to avoid warpage and retain tight part tolerances. Multi-cavity tooling and part assembly lines require predictable shrinkage rates and fast demolding, which this grade enables. Material traceability and batch-level compliance run through the supply chain, supporting major OEM qualification and regular audits.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Producers of rigid and flexible food containers utilize this PP grade in injection and thermoforming processes. Its odor neutrality, controlled extractables, and resistance to organic acids make it suitable for direct food contact. Sanitary transport and in-plant handling meet Good Manufacturing Practice (GMP) systems. The resin enables clear or opaque containers with excellent stacking strength and hinge flexibility for closure lids. Producers can manage wall thickness and transparency in line with project-specific packaging validation, while ensuring compliance with local and international food contact regulations. Quality control laboratories routinely verify migration limits and resin traceability.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Appliance OEMs rely on this PP grade as a base resin for external and internal structural parts. Its dimensional stability under moderate heat and resistance to household cleaning chemicals increase assembly yield and lifetime safety. Injection lines offset formulation for color-stable housings and integrate UV stabilizers for surface-exposed areas. Final assembly houses receive parts with consistent fitment for high-volume production of white goods. Moldflow and rheology matching ensure efficient filling of complex geometries without cosmetic defects, supporting global distributor and brand owner acceptance.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Pipe producers use this type of PP in non-pressure piping, cable conduit, and drainage applications where chemical resistance, weldability, and toughness are primary requirements. As a homopolymer, this PP supports extrusion, socket fusion, or butt welding integration into municipal or industrial piping projects. Formulation allows producers to customize melt viscosity and process temperatures across pipe diameters. Long-term hydrostatic strength validation underlines suitability for installations in building and infrastructure markets. Post-extrusion, quality checks include dimensional control, wall uniformity, and stress cracking resistance audits to comply with national specifications.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Textile converters use this PP in spunbond and meltblown process lines to create nonwoven fabrics for hygiene, filtration, and automotive linings. Melt index and narrow MWD guarantee reproducible fiber diameter and web uniformity. Additive dosing and in-line compounding further tune breathability, hand feel, and anti-static properties. Quality checks include tensile strength and filtration efficiency tests for high-performance masks and wipes. Sterilizable grades support downstream use in single-use medical disposables where contamination risk must be minimized.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive LUPOL Polypropylene (PP) P000003C prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8618018036652
Email: sales6@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
In a market overflowing with polypropylene options, the real test of a product comes in the production plant—where material properties meet machinery, and design expectations face shop-floor realities. From years at the reactor line to reel-to-reel application, we’ve seen what works and what frustrates. LUPOL Polypropylene P000003C emerged from that constant back-and-forth between daily field experience and scientific development. This isn't a compound dreamt up to meet only generic standards; it’s a response to practical hurdles manufacturers have faced again and again—strength, consistency, processability, and the unpredictable quirks that can shut down a line or cause rejects.
Our own site teams know that not all polypropylene is born equal. Some grades might advertise good mechanical properties, but their true worth shows up in cycle times, color stability after long runs, or weld-line behavior in complex shapes. In our experience, P000003C delivers a balance of melt flow and rigidity that removes unnecessary adjustments during molding. Rather than forcing users to compromise, this grade supports tight, repeatable manufacturing windows that minimize downtime for recalibration.
For years, clients shared feedback about warping, stress-cracking, or yellowing over repeated thermal cycles. By working closely with actual molders and converters, we optimized P000003C from polymerization through to pellet design. That’s why in extended runs—think of automotive interior fascia or appliance casings—this polypropylene doesn't just pass bench tests. It runs as expected across large lots, saving resource hours usually lost in scrap or high-wear tooling replacement.
Long after spec sheets are filed away, line engineers are left with the responsibility of hitting throughput targets within narrow cost margins. We’ve learned that polymer flow during injection doesn’t just affect appearance; it dictates how consistently parts fill, how much pressure is needed, whether or not weld lines show weaknesses, and if gate marks stay within acceptable cosmetic limits. P000003C offers a medium melt flow value that manufacturers have described as ‘no-nonsense’—fast enough for speedy cycles but not so high that parts lose detail or feel flimsy once cooled.
On abrasive, multi-cavity molds prone to buildup, we measured the clarity and dimensional hold of P000003C far beyond simple lab evaluations. Down the entire chain—compounding, storage, drying, and conversion—minimal residue accumulates. This trait isn’t just fortunate; it comes from reworking our de-volatilization and pelletizing protocols continuously. Over years, this translated into lower cleaning frequency, sustained part dimension, and less pigment disruption during blending than with many generic alternatives.
From the perspective of someone who’s been in the trenches, surface-level differences between polypropylenes can often be misleading. Many commodity grades might seem interchangeable for initial trials. On a longer production timeline—say, a quarter-million bumpers or thousands of consumer appliances—subtle variations in copolymer content or molecular weight distribution reveal sizable contrasts in product performance and manufacturing cost.
We’ve worked with random and impact copolymer grades from different suppliers. Some offer a high gloss finish but lose out in drop tests. Others withstand battering but sacrifice on appearance or creep resistance. LUPOL P000003C strikes a balance between impact resistance and process reliability, making it applicable for large, load-bearing components as well as thin-walled housings where surface finish and color stability can’t be compromised. Customer reports have backed up our experience here: higher yield per lot, lower tool wear rates, better ultrasonics behavior, and minimal post-production odor.
On recycled blends and sustainability-driven applications, P000003C supports post-industrial recycling integration without complicating stability or contaminant management. Our engineers have shared that when working with grinder regrind blends, they see less embrittlement and more predictable machine response with this grade than with standard homopolymer or some higher-additive melt grades.
Take automotive interiors as an example. We’ve run direct tests with P000003C in high-precision environments. Panel fit, screw retention, and joint performance provide a direct picture of how a polymer copes with design demands. When switching to this grade from others, lines noted reduced internal scrap, steadier part weight, and fewer customer complaints after thermal cycle tests. In dashboards and door trims, paint adhesion and laser marking ease have repeatedly scored higher than with previous standard PP offerings.
Looking at household appliances, manufacturers report less streaking and ghosting after extended, high-temperature cycles. For multicavity injection, color masterbatch disperses with fewer swirls or clumps, something that impacts brand presentation at point of sale. For toys and thin-walled packaging, we've seen drop and squeeze tests return fewer failures across runs than with lower-stiffness or high-vicinity polypropylenes.
Industrial clients who run pipe or sheet extrusion described a smoother processing window, consistent wall thickness, and less risk of deformation after cooling. Many noted that runs with P000003C reduced the number of in-line adjustments and post-cooling rejects over months of high-load operation.
No product is immune from challenges. In warm, humid storage conditions, static buildup can accelerate dust attraction. Customers using open-bag systems pointed out an uptick in dusting—an issue we’ve tackled by reworking the surface energy of the pellets, reducing fines at the bagging stage. It points to a broader reality: feedback from the field is indispensable. No amount of laboratory conditions matches the day-to-day variability of actual production.
Another recurring topic relates to scratch resistance in high-wear applications. P000003C offers moderate scratch resilience, though not on the same level as specialty, high-haze or elastomer-modified polypropylenes. For parts exposed to daily friction—think glove boxes or seat shells—we suggest either a surface additive or a co-molding approach, and we’re actively developing a toughness/stiffness hybrid based on these insights. We have always believed that iterative design improvements, using honest staff and partner assessments, matter more than chasing the latest marketing trend.
We take every batch through a multi-point analysis extending beyond theoretical specs. Melt flow isn’t measured just for regulatory reporting; it’s tracked for scatter, because hot runner tools tend to magnify even small fluctuations. At regular intervals, lab teams and plant floor operators review samples under pressure and thermal cycling—not simply to tick a quality box, but to model worst-case operational realities.
Sometimes a resin that scores high in instrumented lab tests delivers a different story at 3 a.m. on a cold morning start-up. Polymerization curves only give part of the picture. We integrate continuous operator feedback, die image analysis, and part sampling with random audit schedules, because a big part of maintaining reliability comes from the people on the ground, not just metrics on a screen.
Traceability in all feedstocks remains a key focus. Over the years, we’ve adapted line purging, handled input from auditing teams, and adjusted reactor recipes to ensure reliability even as global inputs fluctuate. Shifts in supply chain—such as changes in propylene source or catalyst supplier—can quietly alter the character of an output resin. We have learned to track these shifts with real-world extrusion, injection, and mechanical stress tests, so that a sudden feedstock switch doesn’t catch manufacturers off guard.
As manufacturers ourselves, we’re under pressure to reduce carbon footprint and dependence on virgin fossil resources. P000003C was designed with post-industrial recycled (PIR) compatibility in mind. Our own operations have trialed PIR blends up to 20 percent content without seeing the mechanical failures or contamination spikes sometimes observed in purely homopolymer-based PP. It’s not a solved problem, and serious recycling integration brings its challenges, but this material is part of the ongoing shift to sustainable manufacturing that’s already underway across industry.
Direct support for design and application development forms another advantage of controlling manufacturing from the reactor up. We’ve sat across the table from part designers who need expert help modeling warpage or optimizing cooling channels, and we’ve opened our pilot lines for full-scale part trial runs. With P000003C, we saw the best results materialize not just because of the base resin, but because our team actively joined the problem-solving process—from moldflow simulation through in situ troubleshooting.
OEMs across automotive, appliance, and packaging sectors have reported not only dimensional stability and strength, but also service-life improvements. Ongoing field data shows that panels and casings formed from this resin maintain color and mechanical integrity after years in challenging environments. Our role doesn’t end at the initial shipment or follow-up call—it extends throughout the product lifecycle.
A polymer is only as good as the people running the lines. From the start, we’ve provided side-by-side technical support, troubleshooting with plant operators on hopper loading, screw temperature balance, and even fine-tuning packing pressure. Staff tell us this support pays off when they switch between products or lines and need consistency to remain competitive.
Training programs aim to strengthen operator knowledge and confidence. Internal field teams regularly update shift engineers on latest process improvements, and we involve them early in any change to the P000003C recipe or supply chain. Keeping the production floor engaged has resulted in some of the most effective problem-solving and process adaptation we’ve seen.
Global manufacturers face a patchwork of regulatory and testing landscapes. Our factories undergo regular audit to comply with automotive and consumer safety standards—especially around extractables, leachables, and trace heavy metals. Feedback indicates that products built using P000003C, after full run-off and extended aging, consistently clear material safety and emission screening relevant to demanding regulators or specialty application buyers.
From appliance OEMs working to restrict annex chemicals, to automotive partners dealing with evolving emissions rules, our team’s direct engagement has proven effective in clearing hurdles. Instead of resting on the laurels of one test certificate, we keep adapting, drawing on lessons learned from each market rollout and audit cycle.
Long partnerships have played a central role in shaping P000003C. Input from molders, component assemblers, and in-house plant owners circulates back into production. Rather than sell a fixed formula, we maintain flexibility—willing to adjust stabilization systems, optimize pellet cut, or fine-tune compounding to address site-specific concerns.
This two-way feedback loop goes beyond technical data sheets. A molder who sees shifting cosmetic patterns or a filament extruder facing extrusion foaming brings concerns directly, and our team moves quickly to investigate both root cause and remedy. Building solutions in real time, rather than waiting for quarterly development cycles, prevents risk escalation for both sides.
Evolving production requirements never rest. As more partners ask about flame-retardant or anti-microbial options, we’re exploring compounded variants without sacrificing the backbone properties that make P000003C practical on real floors. Our research and development crews spend significant time analyzing new additive technologies, side-stream integration, and digital process monitoring tools—always with the mindset that better product outcomes come from marrying hands-on feedback with the latest in process chemistry.
Major developments in digital quality control—such as inline rheology and advanced analytics—are shaping future batch consistency. As fresh industry demands emerge, we’re prepared to adapt both polymer design and customer support. Our manufacturing history has taught us that a strong product is not only a matter of formulation, but a result of ongoing, transparent dialogue between everyone in the manufacturing chain.
A polymer’s real measure comes from how it performs under pressure—both literally in the mold and figuratively in high-demand supply environments. With LUPOL Polypropylene P000003C, our goal remains clear: to help customers achieve steady, predictable production at scale without constant troubleshooting or surprise performance drops. The grade’s outcome is not just the result of proprietary polymerization, but countless phone calls, on-site visits, and partnership with real-world users working every day to bring the finished product to market.
Every kilo sets out not just with tested properties, but also with the benefit of lived experience from our lines and from those of our partners. For users looking for more than a spec sheet, LUPOL P000003C represents a polypropylene grade that’s been proven, adjusted, and refined where it matters most—in the heart of ongoing, practical manufacture.