LG Chem, Ltd

Products

LUPOL Polypropylene (PP) GP2300

    • Product Name: LUPOL Polypropylene (PP) GP2300
    • Chemical Name (IUPAC): Polypropene
    • CAS No.: 9003-07-0
    • Chemical Formula: (C3H6)n
    • Form/Physical State: Pellets
    • Factroy Site:
    • Price Inquiry: sales6@ascent-chem.com
    • Manufacturer: LG Chem, Ltd
    • CONTACT NOW
    VTB
    Specifications
    HS Code 456586
    Product Name LUPOL Polypropylene (PP) GP2300
    Manufacturer Lotte Chemical
    Material Type Polypropylene Homopolymer
    Melt Flow Rate 32 g/10 min (230°C/2.16kg)
    Density 0.90 g/cm³
    Tensile Strength At Yield 34 MPa
    Elongation At Break 15%
    Flexural Modulus 1600 MPa
    Heat Deflection Temperature 108°C (at 0.45 MPa)
    Vicat Softening Point 149°C
    Processing Temperature 200–250°C

    As an accredited LUPOL Polypropylene (PP) GP2300 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing LUPOL Polypropylene (PP) GP2300 is packaged in 25 kg white plastic bags with bold blue labeling and detailed product information.
    Container Loading (20′ FCL) Container Loading (20′ FCL): LUPOL Polypropylene (PP) GP2300 loads approximately 16-17 metric tons, packed in 25kg bags, on pallets or loose.
    Shipping LUPOL Polypropylene (PP) GP2300 is typically shipped in 25 kg bags, palletized and shrink-wrapped for stability and protection during transit. It should be stored and transported in a cool, dry place, away from direct sunlight and heat sources, ensuring the packaging remains intact to prevent contamination or moisture absorption.
    Storage LUPOL Polypropylene (PP) GP2300 should be stored in a cool, dry, and well-ventilated area, away from direct sunlight and heat sources to prevent degradation. Keep the product in its original, unopened packaging to protect it from moisture, dust, and contamination. Avoid storing near strong oxidizing agents or chemicals. Always follow safety guidelines and use appropriate personal protective equipment when handling.
    Shelf Life LUPOL Polypropylene (PP) GP2300 has an indefinite shelf life if stored in cool, dry conditions, away from sunlight.
    Application of LUPOL Polypropylene (PP) GP2300

    Applications of LUPOL Polypropylene (PP) GP2300 in Industrial Manufacturing

    As a direct manufacturer, we leverage the mechanical and processing balance of LUPOL Polypropylene (PP) GP2300 to support a wide range of industrial sectors demanding high reliability, regulatory compliance, and production efficiency. The following sections outline real-world use cases where GP2300 demonstrates clear application value, with explicit information on compliance standards, formulation, downstream process steps, and the finished product profile specific to each industry.

    1. Automotive Interior Components

    Automotive tier suppliers continuously use PP GP2300 for producing critical interior parts, valued for its low VOC emissions, impact strength, and process stability during high-throughput injection molding. Applications include dashboards, pillar trims, and door panels, where manufacturers must balance precise dimensional control with weight savings while adhering to strict automotive standards and customer-specific requirements.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    2. Home Appliance Structural Housings

    Manufacturers of large and small household appliances rely on PP GP2300’s high thermal stability, dimensional accuracy, and chemical resistance to withstand assembly demands and extended end-user exposure to cleaning agents and heat cycles. The polymer’s colorability and mold release facilitate fast cycle times across OEM-compliant production lines.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    3. Consumer Storage and Logistics Containers

    In the storage and packaging sector, GP2300’s mechanical resilience and resistance to stress cracking are crucial for goods handling applications requiring repeated drop impact and exposure to cleaning solvents. Industrial and commercial storage bin manufacturers utilize the polymer to conform with food contact safety where required, and guarantee dimensional precision in high-output manufacturing.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    4. Pipe and Fitting Fabrication

    Pipe and fitting producers select GP2300 for applications such as domestic cold water pipelines, irrigation conduits, and fitting connectors, capitalizing on its low extractables, consistent melt flow, and notch resistance. Strict adherence to sanitation and building codes drives raw material selection and process control, especially for municipal and residential supply applications.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    5. Battery Cases for Industrial UPS and Automotive Applications

    Lead-acid and lithium battery case manufacturers depend on PP GP2300’s high electrical insulation, electrolyte resistance, and dimensional stability through automated press molding and ultrasonic welding steps. The formulation targets rigid shell integrity against severe thermal cycling in critical backup power installations as well as vibration resistance in vehicle mounting conditions.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    Free Quote

    Competitive LUPOL Polypropylene (PP) GP2300 prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.

    We will respond to you as soon as possible.

    Tel: +8618018036652

    Email: sales6@ascent-chem.com

    Inquiry

    Get Free Quote of LG Chem, Ltd

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    LUPOL Polypropylene (PP) GP2300: Durable Solutions Rooted in Practical Manufacturing Experience

    A Practitioner’s Perspective on LUPOL GP2300 Polypropylene

    Working on the production floor and designing new polymer grades in collaboration with end-users shapes how we see materials like LUPOL GP2300. This polypropylene isn’t just another grade off the line; it represents years of careful feedback from processors, automotive part makers, appliance builders, and dozens of engineers who insist on dependable, mold-friendly materials. In daily production, every single resin batch is judged by how it flows in a real mold, how parts hold up over time, and what headaches it relieves for molders who manage both large and small injection machines.

    LUPOL GP2300: Model and Where it Stands

    Among polypropylene grades, the GP2300 level targets applications demanding a solid balance between stiffness and impact toughness. This resin, made from isotactic polypropylene, holds a consistent melt flow, generally targeted for injection molding. On our line, this means process stability. We see fewer fluctuations in product quality across typical production cycles. The pellets come in natural or custom colors with a shape and pellet density aiming to reduce bridging in hoppers. Granules feed smoothly, both on high-speed auto-loaders and older hopper-fed machines.

    Where GP2300 Is Used and Why Real-World Makers Depend On It

    LUPOL GP2300’s design draws most attention from goods manufacturers with parts exposed to daily use and occasional knocks. Think about auto instrument panels, HVAC enclosures, home appliance casings, or even sturdy bins and containers for industrial settings. When builders of these products ask about our resin, the conversation often centers around three things: dimensional stability after cooling, resistance to cracking when dropped or flexed, and the resin’s finish after molding. GP2300 offers a balance: enough rigidity to keep shape under pressure but still flexible enough to absorb shocks. This comes up especially with consumer-facing goods: nobody likes complaints about a casing that cracks or panels that warp after a hot summer. In our own post-market surveys, customers highlight life in the field—especially outdoor storage—or feedback from field techs swapping out appliance parts.

    Performance Specifications: What Sets This Resin Apart in Practical Use

    You can read molecular diagrams or spec sheets, but standing next to a working injection press gives a different view. Production teams like using GP2300 because it runs clean and fills molds well without hanging up in complex flow paths. On a medium or large part, consistent melt flow index in the 22–25 range translates into easy filling, robust weld lines, and fewer short shots, even if you run the press slightly faster or slower. Cycle times drop compared to generic PP grades because the resin’s formulation cuts cooling segments by a few seconds per shot. Tighter product tolerances become easier to hit.

    A lot of commodity PPs either swing toward higher stiffness (good for pipes but bad for impact) or softer, rubber-modified grades that lose edge and surface finish. GP2300 targets that midpoint: there’s enough backbone for snap-fit housings, while bend testing shows remarkable resistance to environmental stress cracking. We hear from toolmakers who say this grade flashes less, pulls from the tool with minimal sticking, and stays less prone to breakage at corner windows or ribs. Repairs and rejects go down. This feedback tells us that GP2300 works for busy shops that can’t afford long tool cleaning, high scrap rates, or post-mold warping.

    Pinpointed Differences From Other Polypropylenes

    Years of running multiple PP types reveal the subtle differences that a standard datasheet skips. For molders switching between resins, GP2300 offers a much cleaner processing window, meaning less smoke, less plate-out buildup, and stays forgiving during color changeovers. The melt viscosity profile falls in a “sweet spot”—low enough to fill thin-wall parts such as appliance covers, but not so runny that it creates sink marks or sags. Another common question in our development lab comes from customers worried about shrinkage rates and warpage. GP2300 has been tailored in our reactors and compounding lines to keep shrinkage predictable, even in parts with a mix of thick bosses and thin ribs. This level of control doesn’t come from luck—it’s the result of hundreds of production runs and tweaks.

    Additive packages built into GP2300 focus on durability. Long-term aging in natural light and under moderate heat leaves less yellowing and surface craze. For makers of storage bins, trays, or panels exposed outdoors, UV resistance often means fewer returns and longer warranties. In side-by-side part testing, especially in our research division, GP2300 holds gloss, chemistry, and mechanical properties longer under both accelerated and real-world conditions. Where some cheaper PPs chalk, fade, or harden over a few seasons, parts made from GP2300 keep a smooth, fresh look and aren’t as brittle after cold cycles.

    On-the-Line Manufacturing Benefits

    From experience and conversations with line supervisors, one thing’s clear: resin consistency saves headaches. GP2300’s pellet uniformity means fewer incidents of bridging or surging, especially critical on high-cavity molds. During a typical production week, tool changes are easier, with less downtime for cleaning or purging. Our techs document less black speck accumulation and improved barrel cleanliness after runs of GP2300 compared to some high-recycler-content blends. Electric bills and machine hours also show efficiency gains over time: a higher fill rate and fewer rejects add up in both cost savings and customer good will.

    Dust, fines, and static are headaches for every manufacturer. GP2300 runs through gravimetric feeders and standard hoppers without excessive dust-off or pellet attrition. This leads to smoother running automation, and in packaging operations, bagging equipment stays cleaner. Warehousing managers point out that even after months in the facility, sealed GP2300 shows less clumping and moisture pickup than some competitor resin blends, easing inventory handling and reducing the odds of clogging up feeders.

    Regulatory and Market Considerations From the Source

    We know certifications matter and supply chain transparency has become part of the trust our customers place in us. GP2300 meets the typical requirements for RoHS, REACH, and other regulatory bodies regarding heavy metals and restricted chemicals. Having our own polymerization units and finishing trains means we can trace every pellet batch back to raw monomers. For customers with eco-label requirements, GP2300 leverages energy-efficient reactor conditions and undergoes frequent audits for process and safety.

    Markets shift, and concerns over plastic waste and recyclability grow with every project. Polypropylene, by its very chemistry, is one of the most widely recycled commodity plastics; GP2300 resists color fade during regrinding and reincorporates well into closed-loop manufacturing. Our testing with rework and customer trial runs show that GP2300-based parts retain their toughness and finish over several process loops. This makes it a practical choice for OEMs looking for increased use of post-industrial regrinds without unacceptable downgrading.

    From the Factory Floor: Fielding Real Technical Support Calls

    Tough questions come from experienced processors who want answers grounded in hands-on troubleshooting. The LUPOL GP2300 support team is staffed by engineers who work closely with the shop floor. When a customer struggles with part sticking or not hitting a surface finish spec, they’re not handed a template answer—we send out sample resin, review tool drawings, and review each stage of compounding, shipping, and handling. Feedback then goes directly into updates for the next shippable batch. There’s always room for further adjustment, and this feedback loop is integral to how GP2300 continues to adapt while new regulatory, aging, or mechanical property standards come into play.

    Machine operators and toolroom managers have asked us about how GP2300 sits between older commodity PPs and the newer, more engineered blends. The answer gets to the heart of the resin itself: we avoid excessive talc or calcium filler, since this can lead to embrittlement, weight increase, or surface streakiness. Our additives and nucleating agents are selected for a crisp, clean finish and mechanical stability, using compounding know-how honed over many runs. The result in finished parts: less warping, fewer flow marks, and more consistent ejection—features driven by what real users demand.

    Learning From the Application: Customer Showcases

    Long partnership with several major appliance manufacturers and automotive suppliers means we get direct feedback under production pressure. Many designers working for these companies are after polypropylene grades with more than just a pass on laboratory tensile and impact tests. They ask for real-world cycle aging, chemical resistance against everything from detergents to occasional automotive fluids, and consistent color hold. Appliance OEMs, for instance, have reported lower reject rates and longer tool life with GP2300, citing the resin’s stable melt index and reduced plate-out. Automotive HVAC duct makers favor GP2300 for its resilience in temperature swings, noting fewer stress cracks after repeated thermal cycles.

    In packaging, customers point out that GP2300 offers a smoother surface after molding, reducing the need for post-processing or surface treatments. Distribution centers handling large pallet runs note that knockdown bins made from this resin stay free of microcracks and maintain stacking integrity after long-term handling. For sectors shipping products worldwide, parts molded from GP2300 are less susceptible to transit-related knocks and dents, saving on both repair costs and warranty claims. These aren’t small benefits; they translate into production schedules with fewer surprises and budgets that stay predictable.

    Sustainability and Process Improvements Looking Forward

    The plastics industry faces heavier scrutiny than ever. Every year new mandates about recycled content and life-cycle impacts arrive. GP2300 comes from lines focused on reducing waste and energy use at every turn. We reinvest in process automation and filtration systems to minimize off-spec losses and send fewer materials to landfill. Line audits and updated reactor controls, reviewed quarterly, let us track shifts in monomer quality and end-of-line pellet quality. These steps translate directly to our customers: more consistent incoming shipments, lower off-spec resin, and a tighter chain of custody for regulatory compliance.

    We work with OEMs piloting increased post-consumer recycled content. GP2300 adapts by holding its quality threshold even with a portion of PIR or PCR incorporated. Running trials in our facility provides data on how mechanical properties evolve—less guesswork during switchover. Manufacturers zeroing-in on sustainable practices value this predictability over sudden resin performance swings.

    Solving Known Challenges With Polypropylene: Our Approach With GP2300

    Many manufacturers chasing fast cycles and light parts end up wrestling with static, dust, and part ejection. Our engineers push for additives that improve antistatic properties without hurting clarity or surface. By adjusting compounding and keeping tight tolerances on pellet size and shape, GP2300 feeds more smoothly in automatic feeders as well as in semi-manual presses used throughout Asia and Europe. Fewer jams and bridging incidents mean less machine downtime and smoother shifts.

    Short-cooling parts or those prone to shrinkage in deep molds respond well to GP2300’s predictable crystallinity. Operators running hundreds of molds say that parts hit spec easier, with pulling force during demolding remaining modest and part flash staying within tolerance. GP2300 also shows a lowered odor profile compared to cheaper, recycled-heavy commodity PPs—important for consumer or medical housing applications. This lower odor comes from controlled process chemistry and higher-quality raw stock, not after-market deodorants.

    Economic Benefits Supported by Real Data

    On the procurement side, resin cost is just the entry number. Line operators and engineering managers recognize GP2300’s full cost advantage in reduced downtime, lower scrap rates, and fewer off-spec shipments. Procurement teams in top appliance and auto parts factories now tabulate not just resin price, but also total running costs, including clean-up and post-processing. After switching to GP2300, many manufacturers report lowered overtime budgets since fewer shifts are spent chasing inconsistency. The downstream cost savings from fewer tool repairs and longer tool life also build over annual production cycles.

    Our own after-service records show a drop in customer claims related to stress whitening, ejection breakage, or paint adhesion trouble on molded surfaces. Purchasing teams, especially those dealing with fluctuating seasonal demand, benefit from GP2300’s shelf stability. A full batch sitting in warehouse rarely shows clumping, tackiness, or color change, even after longer storage periods.

    What We Continue to Learn and Improve

    Our technical and quality teams meet weekly to analyze samples returned from field complaints or new customer projects. Every production adjustment aims to fine-tune properties like melt flow or gloss, all to address practical concerns raised by customers. New runs adjust base polymer ratio, additive packages, and reaction timing. Data from in-plant trials or warranty returns enter directly into compound modifications. This direct connection from field to lab and factory floor speeds up improvement cycles, keeping GP2300 at the performance edge.

    Tool design continues evolving, and so do venting and runner systems. GP2300 keeps pace, showing good compatibility with hot-runner systems and minimal stringing. In multi-cavity tools, part weights stay within tight windows, avoiding surprises when switching from pilot to production scale. We regularly work with tool designers to review resin interaction with new geometries, especially in flow-critical or high-gloss end uses.

    Industry Challenges and Directions

    Supply chain disruptions, resin allocation, and growing regulatory burdens hit every link in plastics manufacturing. Owning our own production means we react quickly to monomer shifts, market price jumps, or transport bottlenecks. GP2300 often buffers these shocks for our customers by providing more consistent scheduling and fewer surprises in monthly orders. Ongoing investment in secondary finishing and drying lines means we back up large-scale jobs and small, high-value parts alike.

    Our experience through decades of running these lines has built trust with processors: we know what works, what needs change, and where to invest in next-generation properties. The feedback doesn’t come just from our labs, but right from the plant floors that put LUPOL GP2300 to the test every day, in thousands of parts reaching homes, cars, and factories worldwide.

    Summing Up Hands-On Value

    LUPOL GP2300 stands out, not only for its technical achievements, but because it solves daily headaches in real-world manufacturing. Its strength, consistent performance, and adaptability are shaped by continuous production rounds, field trials, and supply chain lessons learned firsthand. We see this resin perform under pressure, survive production chaos, and deliver on promises that matter to parts makers. Ongoing investments in process control and customer feedback will only tighten its value to factories and their customers for years ahead.