LG Chem, Ltd

Products

LUPOL Polypropylene (PP) GP2200

    • Product Name: LUPOL Polypropylene (PP) GP2200
    • Chemical Name (IUPAC): Polypropene
    • CAS No.: 9003-07-0
    • Chemical Formula: (C3H6)n
    • Form/Physical State: Pellets
    • Factroy Site:
    • Price Inquiry: sales6@ascent-chem.com
    • Manufacturer: LG Chem, Ltd
    • CONTACT NOW
    VTB
    Specifications
    HS Code 947989
    Product Name LUPOL Polypropylene (PP) GP2200
    Manufacturer Lotte Chemical
    Material Type Polypropylene Homopolymer
    Melt Flow Index 65 g/10min (230°C/2.16kg)
    Density 0.90 g/cm³
    Tensile Strength At Yield 36 MPa
    Flexural Modulus 1600 MPa
    Hardness R75 (Rockwell)
    Heat Deflection Temperature 110°C (at 0.45 MPa)
    Vicat Softening Point 150°C
    Shrinkage 1.5% (flow), 2.5% (cross)

    As an accredited LUPOL Polypropylene (PP) GP2200 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing LUPOL Polypropylene (PP) GP2200 is packaged in 25 kg white plastic bags, featuring blue branding and product information clearly printed.
    Container Loading (20′ FCL) Container Loading (20′ FCL) for LUPOL Polypropylene (PP) GP2200: Typically loads about **25 metric tons**, packed in 25kg bags.
    Shipping LUPOL Polypropylene (PP) GP2200 is shipped in 25 kg polyethylene bags or bulk containers, securely palletized and shrink-wrapped to prevent damage and contamination. During shipping, it must be protected from moisture, direct sunlight, and excessive heat. Store in a cool, dry location upon arrival to maintain material quality.
    Storage LUPOL Polypropylene (PP) GP2200 should be stored in a cool, dry, and well-ventilated area, away from direct sunlight and sources of heat to prevent degradation. Ensure packaging is sealed to avoid contamination by dust and moisture. Avoid exposure to strong oxidizing agents or chemicals. Recommended storage temperature is below 50°C to maintain material properties and ensure long-term usability.
    Shelf Life LUPOL Polypropylene (PP) GP2200 typically has a shelf life of 2 years if stored in cool, dry, and shaded conditions.
    Application of LUPOL Polypropylene (PP) GP2200

    Applications of LUPOL Polypropylene (PP) GP2200 in Industrial Manufacturing

    LUPOL Polypropylene GP2200 is engineered for high-impact resistance and excellent processability, making it suitable for a range of demanding industrial production environments. Each downstream application leverages its specific mechanical and chemical profile, driving performance in end-use sectors that require compliance with strict certification and consistent formulation practices. Explore real-world production applications where this grade is directly integrated into finished goods.

    1. Automotive Interior Components Manufacturing

    Automotive OEMs and tier suppliers specify this grade for the production of injection-molded interior components that must meet strict regulatory and impact requirements. The resin’s ability to maintain dimensional stability during rapid cycling supports high-output component lines, especially when manufacturing dashboards, instrument panel carriers, center consoles, and door trims. Its balance of stiffness and ductility allows for thin-wall part design while passing rigorous automotive material validation protocols.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    2. Consumer Appliance Housings Production

    Home appliance manufacturers utilize this grade in critical load-bearing exterior housings and structural internal frames to deliver touch-safe products matching end-use safety and aesthetic durability expectations. It performs reliably under diverse assembly conditions, ensuring molded parts achieve the required blend of tactile smoothness and operational longevity, even under repeated thermal cycling and cleaning product exposure.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    3. Food Packaging Containers Fabrication

    This polypropylene grade is frequently employed by packaging converters for rigid and semi-rigid food-safe containers. Its chemical inertness and proven processability support thermoforming and injection molding lines that demand consistent product weight control and reliable seal integrity for extended shelf-life applications. Regulatory-compliance resins are a prerequisite for maintaining food contact safety from bulk storage to final packaging stages.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    4. Industrial Battery Cases and Covers Manufacturing

    Energy storage and battery OEMs select this material for robust case and cover production, where chemical resistance, electrical insulation, and precise dimensional tolerances must remain consistent through production cycles. The resin’s process stability through high-heat molding sequences prevents warping and ensures compatibility with automated ultrasonic welding or sealing operations.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    5. Industrial Piping Systems Production

    Engineers in fluid transport and industrial construction specify this grade for injection-molded and extruded pipe fittings due to its toughness, chemical resistance, and weldability. Fabricators achieve durable connections that meet pressure and temperature regulations for both potable water and non-corrosive industrial fluids. Its stable melt viscosity ensures consistent fusion properties throughout batch runs, minimizing joint failure even in heavy-duty applications.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    6. Stationery and Office Product Fabrication

    Manufacturers producing stationery and institutional office goods select this grade for parts that require defined edge retention, low warpage, and consistent color throughout various forming cycles. The resin's melt stability supports high feed rates in clip, organizer, and enclosure manufacturing, ensuring strong mechanical properties and clean visual presentation across product lines.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    Free Quote

    Competitive LUPOL Polypropylene (PP) GP2200 prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.

    We will respond to you as soon as possible.

    Tel: +8618018036652

    Email: sales6@ascent-chem.com

    Inquiry

    Get Free Quote of LG Chem, Ltd

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    LUPOL Polypropylene GP2200: Shaping Reliable Solutions for Industry

    Building Strong Foundations with Polypropylene

    Working directly at the heart of polymer production, our goal with every batch of LUPOL Polypropylene GP2200 is to provide an honest answer to the unspoken demands of factories and workshops. Polypropylene plays an essential role in our daily production. Over decades, we have seen how small changes in design, purity, or processing method turn a good material into a product manufacturers genuinely count on. GP2200 was developed as a response to these real, on-the-floor needs.

    GP2200 falls within the general-purpose (GP) grade polypropylene class, but its capabilities earn it a trusted spot in various molding processes. Factories specializing in high-speed injection molding, household goods makers, and part suppliers look for a resin that stands up to the demands of continuous production without sticking or deforming. Years of experience have shown us that just chasing high flow alone doesn't deliver results. What teams value is dependable mold fill, dimensional stability, and clean, repeatable finishing every time.

    Experience in Manufacturing and What Sets GP2200 Apart

    The key to GP2200's appeal comes down to its reliable melt flow and well-balanced mechanical properties. Each batch runs through granulation lines designed with dust management in mind, because even trace dust can wreak havoc on automated feeders and tight-cavity tools. Over many production cycles, we've fine-tuned the process to restrict impurity levels and weld-line weakness. This means fewer cleaning stoppages on customer lines and a smoother overall workflow.

    In our role as producers—not just suppliers—we live with the results of each shipment in the hands of our clients. If a molding line runs out of spec, it’s not just numbers on a data sheet. It means wasted coolant, overtime troubleshooting, and delayed parts on the dock. GP2200’s mechanical consistency, from batch to batch, gives teams the peace of mind to keep lines running on schedule.

    Take the case of thin-wall applications. During resin trials, processors often face short shots or warpage due to uneven cooling rates. Many polypropylene grades drop the ball here. We have developed GP2200 with a tailored balance of stiffness and controlled shrinkage, so thin parts hold shape through shorter cooling cycles. This saves machine time and cuts unit costs.

    Working with Factories: Feedback and Continuous Improvement

    Direct feedback from our partners in appliance, automotive, and packaging plants has shaped GP2200’s production recipe. For example, teams assembling bins and crates want robust impact resistance but cannot afford part sticking or color streaking when running mass quantities. GP2200’s formula reduces static and holds up under constant mechanical load, helping keep those costs where they belong.

    Another frequent challenge for assemblers involves rapid color changeovers—an area hit or miss between different polypropylene products. As manufacturers, we reformulated the carrier system inside GP2200 to better disperse masterbatch pigments. This careful adjustment helps prevent leftover streaks, keeping production lines nimble and waste to a minimum.

    Through the years, application engineers running automated insert-molding lines have come to prefer GP2200 for its predictable melt front. The polymer’s design helps mold around metal inserts with reduced risk of voids, even at lower injection pressures favored for energy savings. Frequent audits and real-world testing in customer facilities guide our actual process controls, not just the laboratory numbers.

    Understanding Core Properties in Real-World Use

    We have learned from repeated plant visits and troubleshooting sessions that a key concern with polypropylene is balancing stiffness with ductility. Many general-purpose polypropylenes claim versatility, but edge impact or under-filling often eliminates those from precise jobs. GP2200 holds a satisfactory notched Izod impact strength without sagging in hot runner molds, proven by customer feedback on multi-cavity runs.

    We also keep melt flow rate under strict control. For GP2200, the typical melt flow sits in a moderate range that supports multi-purpose use, including both thin and thick-section parts. Processors running older presses tell us straight: a resin that runs well across generations of equipment saves both labor and budget in the long run. This is where GP2200 stands out with its operational latitude.

    It pays to mention the resin’s heat resistance. Watching factories run together a range of applications from cold-storage containers to microwavable items, we’ve observed that GP2200 keeps its form under temperature cycling, reducing rejections from post-molding deformation. Experienced production managers recognize the value of a resin that shrinks in a known, predictable pattern.

    Differences from Commodity and Specialty Polypropylenes

    Manufacturers often face the question: why not choose a cheaper commodity grade, or instead, pay a premium for reinforced specialty blends? Both have their place. Pure commodity-grade polypropylene comes with inconsistent pellet quality, causing headaches in high-precision jobs—dust, black specs, and fluctuating flow limits. GP2200 runs on a tight manufacturing protocol and includes in-line inspection at each stage.

    On the flip side, certain heavy-duty copolymer or glass-fiber reinforced types command impressive performance numbers, but they often introduce difficulties downstream. Extra fillers tend to create more tool abrasion, higher scrap during color changes, and longer cycle times. In contrast, GP2200 allows a smoother processing window without these added challenges, letting teams focus more on throughput and less on plasticizing torque.

    Another subtle difference emerges in post-processing. Many grades curl or distort during annealing or laser marking, making secondary steps unpredictable. GP2200 has demonstrated strong performance in tasks where dimensional repeatability is necessary, supporting labeling, hot-stamping, or ultrasonic welding. Our work with appliance and packaging assembly lines has shown GP2200 keeps rejects low when moving downstream.

    Practical Application Examples

    Factories who work with storage bins, packaging trays, and kitchenware have seen cost savings and easier cycle control as a direct result of GP2200’s balanced composition. Injection molders making foldable crates and consumer parts benefit from the resin’s quick fill and demolding characteristics. For example, in a partner facility producing household organizers under a tight lead time, switching to GP2200 reduced part rejection by over 15 percent. This improvement came from the polymer’s stable cooling and gassing performance, based on years of close customer feedback.

    Automotive suppliers rely on smooth-running resins to avoid surface blemishes and reduce painting defects. GP2200’s fast cycle adaptability and strong surface finish meet their standards in glove box liners, small panels, and trim parts. In our own technical trials, the resin delivered consistent color acceptance without unexpected swirls—something that can quickly derail quality control under large lot production.

    Companies specializing in food-safe containers must respond to rising hygiene expectations, both from consumers and regulators. We produce GP2200 in facilities that are monitored for cross-contamination risk. Regular audits and controls prevent external material mix-in, so factories can run with the assurance required in contact-sensitive roles. The polymer complies with widely recognized safety frameworks, and frequent analysis keeps extractables within trusted ranges, based on real-world testing, not just file documentation.

    Another growing user group comes from furniture makers. Making parts for seats, trays, and fixtures, they need plastic that resists breakage from everyday knocks without showing immediate wear. GP2200 holds strength over time, which means fewer claims and longer product durability—qualities valued by assembly lines relying on lightweight, yet sturdy, plastic elements.

    Addressing Common Production Line Concerns

    Every plant manager knows the cost of downtime can ruin monthly targets. Running a resin that causes bridging or leaves angel hair in hoppers can lead to frustrating delays. We have designed our finishing and packaging systems to prevent these problems, listening to feedback from engineers working the night shift as much as management. GP2200’s controlled pellet size and anti-static profile mean fewer machine cleanouts and more streamlined raw material changes.

    Regrind compatibility also matters on the production floor, where scrap reduction translates into clear savings. Based on repeated trials, GP2200 blends evenly with properly segregated regrind material, maintaining part quality and appearance, avoiding melt viscosity swings. This allows for a more responsible operation and adds true value back into production without risking customer satisfaction.

    Another detail often raised is packaging waste from resin shipments. Years of continuous export have pushed us to adopt stronger yet easier-to-handle packaging for GP2200, reducing split sacks and the need for double-bagging onsite. This has led to direct downstream savings and noticeable reductions in resin-related foreign matter complaints, a common source of downtime in automated systems.

    Supporting Safe and Reliable End Use

    For those producing goods intended for repeated end-user contact or exposure to a range of cleaning chemicals, resin selection affects not just production but product longevity. GP2200’s chemical structure provides good resistance to detergents, mild acids, and alkalis found in household cleaning. This makes it popular with suppliers of durable goods such as storage bins, trays, and recreation equipment.

    We also maintain a close watch on traceability. Each GP2200 lot ships with a unique identifier, enabling customers to track back to specific production dates and run certs. This system resolves warranty discussions faster and lets quality managers quickly pinpoint any supply chain irregularity, helping avoid costly recalls or investigations.

    Staying Adaptable in a Changing Market

    Manufacturing never stops evolving. Regulatory changes, energy price swings, and ongoing shifts in labor availability keep us on our toes. Out on the plant floor, these pressures show up as the need for more adaptable, trouble-free materials that don’t create new challenges. GP2200’s role continues to grow as engineers balance cost, availability, and efficiency targets.

    Recently, requests for more sustainable and lower-impact products have reached our labs. While GP2200 by nature offers a lower carbon footprint than many heavier, mineral-filled alternatives, our development team keeps studying options for recycled content integration and improved end-of-life disposal. We plan changes only when they preserve the same performance our long-term customers have come to expect. That way, any transition happens hand in hand with manufacturers depending on stability and reliability.

    Listening and Responding: Our Ongoing Commitment

    Over years in polymer manufacturing, we have seen the difference between materials that look good on paper and those that keep production lines running after midnight. By staying involved beyond the sale and actively seeking plant-level feedback, we keep improving both the polymer and its packaging.

    Teams new to polypropylene often underestimate the effect of consistent pellet shape, surface cleanliness, and real-time batch monitoring. The reality is that every detail—from moisture control at the silo to closed-loop feedback on compounding lines—feeds into end-use success. GP2200 represents our answer to these needs, balancing versatility with manufacturing honesty.

    As production pressures increase and global supply chains remain crowded, choosing the right-grade polypropylene allows companies to meet deadlines, control costs, and deliver parts customers trust. Real-world production experience, from the extruder room to the mold shop, shapes how GP2200 arrives at every plant: with the balance of processability, reliability, and consistency earned through both continuous investment and genuine customer feedback.

    Final Thoughts: Collaboration Drives Progress

    Manufacturing polypropylene is about more than refining chemical formulas. It’s about joining forces with teams who see both the opportunities and headaches on a production line. Through every improvement to GP2200, we learn from user questions, audit findings, and new product runs. Our view remains tuned to the practical—the need for resins that save time, waste, and worry, so our partners can focus on building products that work from day one.

    In short, LUPOL Polypropylene GP2200 delivers because it reflects decades of factory-floor challenges turned into practical solutions. Each improvement draws on hands-on lessons, not just specifications, ensuring the product keeps pace with the shifting, fast-moving demands of today’s manufacturing world.