| HS Code | 926520 |
| Product Name | LUPOL Polypropylene (PP) CP360H |
| Manufacturer | Lotte Chemical |
| Polymer Type | Polypropylene Homopolymer |
| Melt Flow Rate 230c 2 16kg | 36 g/10min |
| Density | 0.905 g/cm3 |
| Tensile Strength At Yield | 35 MPa |
| Elongation At Break | ≥50% |
| Flexural Modulus | 1600 MPa |
| Heat Deflection Temperature 0 45mpa | 104°C |
| Vicat Softening Point | 150°C |
| Applications | Injection molding, housewares, containers |
As an accredited LUPOL Polypropylene (PP) CP360H factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | LUPOL Polypropylene (PP) CP360H is typically packaged in 25 kg white polyethylene bags, labeled with product details and manufacturer information. |
| Container Loading (20′ FCL) | **Container Loading (20′ FCL):** LUPOL Polypropylene (PP) CP360H typically loads about 25 metric tons, packed in 25kg bags, per 20′ FCL container. |
| Shipping | LUPOL Polypropylene (PP) CP360H is shipped in sealed, moisture-proof 25 kg bags or in bulk containers to prevent contamination. It should be transported under dry, ambient conditions, away from direct sunlight and heat sources. Standard palletization ensures stability and easy handling during transit, complying with regulatory and safety guidelines. |
| Storage | LUPOL Polypropylene (PP) CP360H should be stored in its original, unopened packaging in a cool, dry, and well-ventilated area, away from direct sunlight and sources of heat. It should be protected from moisture, dust, and contamination. Avoid stacking the material excessively to prevent deformation. Ensure the storage area is clean and free of substances that may degrade the polymer. |
| Shelf Life | LUPOL Polypropylene (PP) CP360H typically has an indefinite shelf life if stored in cool, dry conditions away from sunlight and contaminants. |
As a manufacturer dedicated to providing consistent quality and technical support, we supply LUPOL Polypropylene (PP) CP360H as a high-flow grade polypropylene designed for demanding industrial conversion and downstream manufacturing. Below, we outline specific, established B2B application scenarios where CP360H is widely utilized, describing compliance frameworks, dosage practice, integration in downstream production, and the nature of final goods.
Automotive manufacturers utilize CP360H polypropylene resin to achieve superior surface finish, dimensional stability, and long-term performance for a variety of interior trim and technical parts. This grade meets the sector’s stringent VOC emission and odor standards, allowing formulators and tier suppliers to adjust impact modification and coloring requirements while optimizing cycle times in high-volume injection molding. Integration focuses on dashboard fascias, door trims, and pillar covers subject to strict regulatory norms for passenger safety and release of volatile compounds.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
The compound’s high melt flow and mechanical resilience make it a key material for forming complex, injection-molded housings for home and commercial appliances. Appliance OEMs rely on this grade to balance processability with color stability and abrasion resistance, meeting both mechanical integrity and chemical contact safety expectations for daily-use items. Downstream production lines incorporate CP360H for large-scale, semi-automated production of housings exposed to mechanical stress and high-visibility surfaces.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Downstream packaging processors employ this polypropylene grade for producing rigid containers, closures, and functional caps by injection or compression molding. CP360H maintains its toughness and clarity after high-shear, high-speed filling processes, making it suitable for the packaging of both food and non-food contents. Packaging converters must calibrate additive levels to comply with rigorous food contact and migration limits in regulated markets.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Manufacturers of stationery and office supplies choose this grade for its consistent colorability, antistatic property retention, and mechanical precision in multi-cavity molding tools. Applications such as pen barrels, snap-fit clips, and utility case lids require high reproducibility and resistance to stress whitening, while compliance focuses on consumer item safety and physical performance under repeated handling.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Battery processors in automotive, industrial, and standby power sectors utilize the material’s high electrical insulation and impact resistance for forming battery housing parts. CP360H’s resistance to acid and chemical attack, combined with mold flow performance, enables reliable downstream printing and assembly with no significant warpage or leakage risk. Compliance centers on electrical, flame retardant, and mechanical norms for energy storage devices.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Leading device manufacturers adopt CP360H for non-invasive diagnostic, monitoring, and laboratory instrument housings due to its chemical resistance, easy sterilization, and color stability under frequent cleaning. Processing lines rely on the material’s flow performance for crisp panel detailing and screw mounting integrity without brittleness, while compliance ensures safety for repeated patient and operator contact in clinical environments.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive LUPOL Polypropylene (PP) CP360H prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8618018036652
Email: sales6@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
The market doesn’t stand still, and neither do production standards across plastics manufacturing. In the last decade, we’ve seen demand shift: lighter weight, higher rigidity, and greater purity have become the foundations of high-value thermoplastic products. This drove our team to refine our polypropylene lines—products like LUPOL Polypropylene (PP) CP360H stand out because we engineered them with these realities front and center.
We don’t approach polypropylene with a one-size-fits-all mentality. The CP360H model was developed based on the technical and practical feedback we gained from partners working with injection-molded automotive, home appliance, and food packaging components. Manufacturers told us what they struggled with: weight reduction without a loss of strength, clean food contact, and visual appeal free of chalky residue or inconsistent finish. Using homopolymer base technology and a precisely managed melt flow index, CP360H addresses those specific issues.
You can’t cut corners when you manufacture a material that goes straight into car interiors or kitchenware. Every pellet of CP360H reflects years of steady process refinement. We start with feedstocks that meet strict traceability standards. Our reactors and finishing lines allow precise temperature, catalyst, and pressure control. This consistency shows up in real-world applications—final parts exhibit stable impact resistance, dimensional accuracy down to tenths of a millimeter, and a surface free of streaks or gel defects.
Throughout production, our operators aren’t just running checks for paperwork. They’re watching for signs that tell the true story—unusual discharge sounds, visible color variation, unexpected odor, or even how resin pours from the silo to the extruder. A machine won’t notice those details the way a veteran process technician can. We treat PP lines with the same care welders use to judge a finished bead by eye and by touch, not just a gauge.
From our lab data and in-the-field results, CP360H stands apart because it pairs a reliable melt flow index in the 30-35 range with a high flex modulus, making it well suited for thin-walled, rigid parts. In automotive trim or electronic housing applications, these characteristics mean less wall sag, reduced cycle times, and more consistent filling during injection. The polymer’s high isotacticity leads to parts with superior gloss and fewer post-mold defects. We saw line yields climb and scrap rates drop after switching customers over from typical cost-driven alternatives.
Material cleanliness counts in food-contact situations. We control volatiles, monomer residue, and trace metals to minimize odor and taste transfer, so CP360H not only meets regulatory standards, but consistently meets sensory requirements on whiteware and clear packaging forms. We support this with real numbers from regular GC-MS and migration testing, not just broad marketing claims.
Serving OEMs and custom molders gives us a close-up view of final part challenges. Reproducible dimensional stability has a direct link to how window regulators, air vents, and small kitchen gadget housings fit together without excess flash or warpage. That’s where the hydrostatic pressure performance and melt elasticity built into CP360H come into play.
As for food-grade packaging, our clients avoid downstream trouble—labels stick cleanly, surfaces don’t haze up during sterilization, and pellets load reliably through high-shear feeders. Plant managers tell us they need less downtime scrubbing vent screens and regrinding angel hair. Labor savings add up at the end of the quarter.
We don’t chase the lowest price point at the expense of long-term reliability. Running cheaper grades through high-speed lines often brings more than its share of headaches: warping, inconsistent shrinkage, unpleasant surface texture, higher scrap, and more off-spec product. With CP360H, our melt index control means small design changes don’t send cycle times through the roof. Customers scaling up from pilot molds to commercial production find fewer unplanned adjustments after the switchover.
We maintain higher transparency and lower nucleating agent concentration than off-brand or reprocessed resins. This shows up under close inspection: parts molded from CP360H take color and masterbatch more evenly and don’t pick up the telltale “milky cast” some competitors’ resins leave behind. If someone’s spent an afternoon recalibrating coloring dosages, this difference is impossible to ignore.
We’ve tested CP360H’s recyclability repeatedly across closed-loop plant scenarios. The material keeps its form and processability for more regrind cycles than the average commodity PP, losing less tensile and impact strength on each turn. This keeps bulk bins – and the bottom line – healthier.
Tooling and maintenance crews often judge a resin by more than what’s written on a data sheet. We listened to feedback from teams switching from widely available general-purpose PP to CP360H. They reported a notable reduction in die buildup and easier screw cleaning, even after long production runs. Color changes run faster and require less purge. This doesn’t just save batch-to-batch changeover time; it cuts maintenance labor and avoids machine downtime due to stuck residues.
In multilayer and composite work, weld-line strength and bond uniformity measure up to industry targets. We’ve had partners in appliance housings and vehicle interior systems report fewer post-mold failures after shifting to CP360H as the outer skin because of tighter flow control and higher surface energy.
Food-grade compliance standards keep growing stricter. CP360H meets the migration and overall heavy metal thresholds laid out by regulators across multiple countries. We go beyond stating compliance—batch records can be traced back to the feedstock source, and regular audit samples make their way to third-party labs for cross-verification. This process builds trust with converters and brand owners. As a direct producer, we don’t rely on secondhand verifications; we demonstrate transparency with real testing schedules, so customers don’t face supply chain challenges down the road.
From food trays and yogurt cups to lightweight durable closures, CP360H’s material clarity and tissue retention often exceed industry expectations. Shelf-life stability and the ability to withstand both sterilization and low-temperature storage environments put this polypropylene out in front of more basic resins, which can develop brittleness or odor migration over time.
The automotive sector runs on tight tolerances and unforgiving QA checkpoints. If a resin fails mid-assembly, the fallout can echo up and down the line for days. CP360H provides the mechanical stability necessary for dash inserts, internal brackets, air diffusers, and other trim. Its warp resistance saves money otherwise spent scrapping trays of out-of-spec parts and recutting tools. The flow profile ensures even rib filling, so supports underneath trim stay strong without sink marks showing on visible surfaces.
PP CP360H’s high thermal stability also supports direct overmolding and secondary finishing, windowing the margins left by less consistent commodity PPs. We work closely with engineering and QA departments in major supplier chains—they rely on exacting batch-to-batch sameness to avoid program downtime or part recalls. Consistent lots and timely fulfillment help them stay ISO-certified and cost-competitive.
Sustainability has grown from a buzzword into a genuine manufacturing priority. In production, we manage energy usage, VOC control, and water recirculation – not only to meet local laws, but because the numbers show concrete efficiency payoffs over time. CP360H undergoes life cycle analysis to document its lower total energy footprint versus heavier, shorter-lived plastics. Its high recyclability supports closed-loop systems, allowing us and our partners to recapture, reprocess, and reuse production scrap reliably.
We’ve implemented advanced pellet conveying and dust removal systems that decrease bulk-handling losses and workplace exposure. Our facility investments let us deliver every bag and silo load knowing the consistency reflects both our environmental commitments and bottom-line business priorities.
CP360H’s predictable regrind performance lets manufacturers close the loop internally more efficiently, limiting unnecessary waste shipments and lowering logistics costs.
Our technical service group spends a lot of time on factory floors, watching how materials perform under actual operating conditions. We’ve helped molders tweak gating, flow paths, and cooling times in response to feedback specific to CP360H. Its high melt flow simplifies mold filling on complex geometries. In consumer goods made with living hinges—think flip-top closures—CP360H resists stress whitening and fatigue failure. Parts keep their shape and snap after countless open-close cycles.
Design engineers have come to appreciate that with this material, less post-mold warpage and higher tolerance retention allow for tighter fits between mated components. This reduces the need for trial-and-error on mold modifications, helping keep projects on deadline and under budget.
Compounders push polypropylene to its limits—demanding base polymers that remain stable when loaded with fillers or additives like talc, flame retardants, or glass fibers. The backbone we’ve built into CP360H holds up well to compounding shear and disperses additives without excessive viscosity spikes.
This means fewer melt filter blockages, more consistent mix color, and reduced plate-out on hot-runner tips. Whether you’re producing a mineral-filled automotive part or a lightweight masterbatch for consumer packaging, a stable base material avoids lost time and off-spec product. Cost savings show up down the chain: machine stoppages, customer rejections, and labor for line cleanout all fall.
We back every lot of CP360H with traceable records, from raw materials through reactor conditions, pelletizing, and bagging. Our in-plant QC program relies on both standardized test methods and real-world checks. It isn’t enough to pass tensile and MFR numbers; we run drop tests on finished assemblies, monitor color variability under direct lighting, and conduct user-representative stress checks.
Not all polypropylene is the same, and minor defects in pellet morphology can trigger extruder hang-ups or lumpy surface finish. We run outside-the-lab process trials to spot and fix these issues before customer shipments ever leave our plant. This hands-on approach delivers higher part-to-part consistency, limits surprises, and provides end users tools they can trust.
With increasing demand for fast turnarounds and predictable inventory, reliable supply ties directly into overall customer performance. As a manufacturer, we hold real-time production and logistics data—no waiting on third parties or resellers for stock status or shipping notifications. This allows us to work directly with customers facing surge orders, inventory spikes, or short production windows.
We’ve invested in logistics capabilities — silo delivery, secure big bag handling, and regional warehousing — to limit bottlenecks. Our own transport and customer support teams have solved urgent plant stoppage cases, even during holiday or volatile shipping periods. That kind of flexibility doesn’t happen with generic or heavily brokered product lines.
Ongoing communication at the production level builds partnerships that make a difference under pressure. It’s not uncommon for us to provide plant trial resin for process validation or support emergency resupply after an unforeseen stoppage. These actions support steady manufacturing output, quality, and a strong working relationship well beyond a single order.
New markets keep challenging polypropylene: lighter cars, smarter devices, sustainable retail packaging, and health-conscious food storage. Our process development teams work alongside R&D leads from major product designers to deliver resins that meet precise requirements, whether that’s for higher clarity, better print adhesion, deeper color saturation, or lower VOC offgassing.
Every successful application using CP360H has informed our ongoing process improvements. Whether we’re supporting a startup’s first run of sustainable food containers or optimizing flow-front consistency for a tier-one auto supplier’s next project, direct manufacturer insight supports application innovation.
Even a well-developed product like CP360H faces its share of technical and market challenges. Mechanical property drift, contamination during storage, or transport timing disruptions require continuous attention to production and delivery discipline. We keep tight integration between our quality labs, logistics centers, and field engineers so small issues don’t spiral into big problems for downstream users.
We invest in ongoing operator training and open communication between shifts, making sure insights gained from each production run get applied to the next. Rather than hiding or ignoring performance dips, we address the root causes and update process controls. This practical, experience-backed approach delivers both ongoing product consistency and continuous relationship value to every partner.
Experience on the plant floor—watching batches run, hearing machines, and seeing material form—frames everything we do as a polypropylene maker. LUPOL CP360H wasn’t just built to meet arbitrary data sheet targets. It arises from decades of feedback, technical troubleshooting, and a hands-on commitment to better, more usable material.
Listening to line operators, QA teams, supply chain managers, and designers has shaped every improvement we make. Their perspective, along with manufacturing know-how, forms the backbone of the material’s performance advantages across industries. Our job isn’t just shipping polymer—it’s making sure every bag, every batch, and every shipment supports someone else’s process, reputation, and product.