| HS Code | 594874 |
| Product Name | LUCENE Polyolefin Elastomer (POE) LC565 |
| Manufacturer | LG Chem |
| Polymer Type | Polyolefin Elastomer |
| Grade | LC565 |
| Melt Index 190c 2 16kg | 3.5 g/10min |
| Density | 0.868 g/cm3 |
| Hardness Shorea | 80 |
| Tensile Strength | 11 MPa |
| Elongation At Break | 850% |
| Melting Point | 48°C |
| Flexural Modulus | 22 MPa |
| Vicat Softening Point | 40°C |
As an accredited LUCENE Polyolefin Elastomer (POE) LC565 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | LUCENE Polyolefin Elastomer (POE) LC565 is packaged in 25 kg white plastic bags, labeled with product name, grade, and manufacturer. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL): Typically loads 16 metric tons of LUCENE Polyolefin Elastomer (POE) LC565, packed in 25 kg bags. |
| Shipping | LUCENE Polyolefin Elastomer (POE) LC565 is typically shipped in 25 kg polyethylene bags or bulk bags to ensure protection from moisture and contamination. Shipments are securely palletized and shrink-wrapped for stability during transport. All packaging is clearly labeled with product details and safety information in compliance with international chemical shipping standards. |
| Storage | LUCENE Polyolefin Elastomer (POE) LC565 should be stored in a cool, dry, and well-ventilated area, away from direct sunlight and heat sources. Keep the material in its original, tightly sealed packaging to prevent contamination and moisture absorption. Avoid contact with strong oxidizing agents. Handle with care to prevent physical damage and ensure stable storage conditions. |
| Shelf Life | LUCENE Polyolefin Elastomer (POE) LC565 has a shelf life of 24 months when stored in its original, unopened packaging. |
As the original producer of LUCENE Polyolefin Elastomer LC565, we support a wide range of industrial sectors where demand for flexibility, impact strength, and processing efficiency underpins product reliability and compliance. Our detailed application segmentation below reflects authentic industry use, based on technical collaboration and field-proven integration data from our direct downstream partners.
Polyolefin elastomers significantly enhance flexibility, low-temperature impact performance, and stress-crack resistance in power cable and optical fiber coatings. Utility-grade and telecom wire manufacturers incorporate LC565 to comply with global fire safety, electrical, and physical durability standards, adjusting the compound ratio to maintain dielectric properties and processability.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Automotive compounders utilize our POE LC565 to achieve balanced ductility, scratch resistance, and low-temperature impact strength in TPO panels, interior trims, and bumper facias. This application aligns with OEM environmental and safety compliance, tuning the elastomer loading for regional weather and crash safety requirements.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Adhesive formulators employ LC565 to tune open time, flexibility, and cold temperature integrity of polyolefin-based hot-melt adhesives in packaging, woodworking, and bookbinding lines. The material’s compatibility with tackifier systems supports compliance with packaging contact standards and process throughput expectations.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Film converters incorporate POE LC565 to improve tear strength, puncture resistance, and sealability of multi-layer packaging films for food, personal care, and industrial applications. Brands in regulated markets rely on elastomer-modified films to meet contact safety and supply chain sterility expectations without sacrificing machinability or optical clarity.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Shoe sole and sporting goods manufacturers incorporate LC565 into EVA and crosslinked PE foam to deliver enhanced elasticity, dimensional stability, and rebound under repeated compression cycles. This elastomer supports global substance restrictions and wear resistance requirements for footwear distributed in regulated markets.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Producers of industrial and consumer rigid goods blend LC565 into polypropylene to boost impact resistance, energy absorption, and elongation. Typical users adjust the ratio to balance processability and final part stiffness in response to end application drop tests and regulatory mechanical properties.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive LUCENE Polyolefin Elastomer (POE) LC565 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8618018036652
Email: sales6@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Every new product in the polyolefin elastomer family tells its own story, but in our plant, the journey of LC565 stands out. For years, customers asked for an elastomer with more than ordinary flexibility—it needed to survive harsh processing, deliver clean performance, and open opportunities in tough applications. From the first small batch samples, our technical team dove deep into process temperatures, catalyst tweaks, and resin selection, pushing the boundaries of what a POE could be. LC565 emerged out of these demanding trials, shaped by dozens of iterative runs and critical customer feedback. Unlike more generic grades, LC565 didn’t come from a standard recipe—it grew out of real-world demands from film makers, injection molders, and compounders who kept hitting the limits of other materials.
Many elastomers flood the market, but LC565 quickly found a following because it actually solved specific problems our partners faced. Several compounders we supply had issues with tough-fibers and impact modifiers that either drove up costs, clogged their extruders, or showed unpredictable shrinkage in finished goods. LC565 broke through these barriers with a molecular weight profile fine-tuned for fast processing and a narrow melt index (MI) range that gives more consistent parts, even when scaled up from pilot lots to full commercial batches. Resin clarity and elasticity, two features often seen as mutually exclusive, meet head-on in this formulation—a feature molded from both chemistry and real application insight. Compounds made with LC565 show strength at low temperatures, boasting higher tear resistance while staying easy to blend into TPOs, soft-touch films, and cable compounds.
Specifications only matter if they translate to better results on the line. In our own trials, LC565 landed consistently with a melt flow index right in the sweet spot for automotive and wire applications—about 0.9 to 1.3 g/10min. This MI opens up options for thin-gauge films but avoids the kinds of flow challenges that slow down custom sheet lines. Shore A hardness sits in the lower 60 range, so finished materials feel supple without losing bounce-back. The density, below 0.89 g/cm³, helps finishers and converters balance lightweighting goals with toughness, reinforcing everything from artificial leather to soft packaging. The clarity and gloss, as we’ve seen in our own pressed films, surpasses most filled alternatives that customers used before switching.
For end users who chase multi-layer films or co-extruded profiles, LC565 lets operators dial up flexibility and cling in stretch wrap, or improve impact strength in automotive PP blends—all while minimizing complications with process stability. Since LC565 comes from a metallocene-catalyzed process rather than a random copolymer blend, the material profile remains locked in batch after batch, a must for those who can’t afford downtime from lot-to-lot variations.
Our conversations with converters, processors, and R&D teams drive countless product improvements. Several converters explained their old elastomers suffered from too much die build-up and inconsistent pellet quality, issues that created more than a few night shift headaches. The fine balance of comonomer types in LC565—mainly butene with a calibrated loading of octene—has helped companies reduce these problems without bringing unwanted stiffness or odor, both of which caused costly rework on older lines. In fact, process managers at one major cable plant told us their scrap rate dropped by over 8% after switching to LC565 for bedding and insulation layers. Soft-touch grip producers also report fewer shifts lost to gelling and less color streaking during pigment changeovers, thanks to LC565’s tighter formulation control.
It didn’t make sense to them, at first, that a slight adjustment in comonomer ratio could make this much difference. Our technical staff spent afternoons on those lines, running side-by-side comparisons so customers could watch real granule melting, in their own extruders, under their own conditions. LC565 stood up to the test on cycles as short as 17 seconds, reducing transfer losses and holding gloss for transparent grades. There are plenty of grades on the market but those nuances in processing make a significant impact at the end of each fiscal quarter.
Since rolling out commercial grades, we’ve worked with many sectors. Packaging customers who had been forced to use costly plastomers or settle for blends that compromised strength finally found balance with LC565. In shrink film and stretch wrap, the improved elastic recovery and puncture resistance allowed for down-gauging—one plant dropped film thickness by nearly 20%, translating to raw material savings and less waste on roll changeover.
Auto parts manufacturers benefited in different ways. Bumper fascia and interior trim commonly fail impact resistance tests, forcing teams to chase specialty formulations that double raw material cost. With LC565 as an impact modifier in TPO blends, these fails dropped sharply in both lab and real-world tests. Multiple lines now run LC565-modified TPO in series production, passing drop tests and meeting OEM appearance standards. The material’s melt stability keeps die faces clean, so there is less downtime for tool change—again, a metric that actually matters to plant engineers.
Outdoor power equipment builders and cable compounders brought up long-term performance. Some worried about UV sensitivity—a real concern for elastomers exposed to sunlight and heat. After running outdoor aging cycles at both our test fields and external labs, LC565 maintained its elasticity and resilience, even after 1,000 hours equivalent sunlight. Cables using LC565 as a bedding layer passed not only industry flexibility tests but also cold impact down to -40°C, a critical bar for utility projects in northern regions.
Producing LC565 isn’t a matter of just switching out a catalyst or tweaking a reactor cycle. We push strict controls all the way from feedstock purification to polymerization at every batch. Every reactor run gets rigorous melt index sampling and FTIR checks, so we catch the smallest variations in comonomer distribution and chain branching. This hands-on process management keeps us confident that every pallet shipped will meet the demands of the plant floor and not just the lab bench.
Energy efficiency became a core focus during development. Customers needed a POE that wouldn’t demand higher extruder temps. LC565 brings down processing energy thanks to its narrow molecular profile, requiring less torque and frictional heating under standard screw designs. This matters as much to the bottom line as to sustainability reporting, and several compounding customers now rank LC565 as a preferred material based on overall green metrics, not just traditional performance numbers.
Real world feedback makes clear that LC565 steps away from older, randomly-copolymerized elastomers. In production, grades based on Ziegler-Natta or conventional metallocene responses lag behind LC565’s batch-to-batch consistency and ease of processing. Film processors share that other POEs often develop lensing, gels, and flow lines in co-extruded applications at either high or low draw. Our teams worked to eliminate those pain points; LC565 holds shape and surface across a much wider range of take-off speeds.
Cost structure matters as much as functionality. Customers who previously blended softeners, or double-dosed high-cost plastomers, found LC565 brought equivalent flexibility but at a better price point and with fewer additives. Some competitors’ grades come with limitations: lower puncture resistance or stickier extrudates hampered downstream converting. LC565 strikes a real-life balance—strong and tough, but still forgiving enough to mold diverse parts on the same equipment. The feedback from automotive and packaging lines directly influenced our tailoring of the molecular weight peak and comonomer selection.
In hot-melt adhesives, the difference matters even more. Some POEs bring too much cold flow, causing roll deformation and sticky sheets. LC565, with its targeted crystallinity, resists cold flow while allowing enough softness for low temperature application. Hot-melt formulators can make sticks and pellets that retain form without wrappers or extra stabilizers.
Every batch leaving our facilities passes both industry norm and customer-driven quality control. Our QC logs for LC565 stand out compared to conventional grades, including checks for trace metals, volatile loss, and high temperature performance. As sustainability standards continue rising, we work to ensure our polyolefin elastomers meet and exceed those emerging requirements. Many customers transitioned to LC565 because earlier materials couldn’t align with new European or North American standards for heavy metals or extractables. This shift wasn’t just reactive—our compounding partners relied on advance information so their own sustainability audits would pass with confidence.
Stability in storage matters, too, as small batch compounders and film processors often rotate stock for six months or more. LC565 resists oxidative yellowing and maintains pellet integrity, helping our customers control inventory losses. Several manufacturers using recycled input streams for green applications found LC565 stepped up blend performance, making their circular economy products more practical and stable on the line.
From the floor of our production hall to the lines of our customers, LC565’s development drew on almost constant feedback. Product support for us means more than a spec sheet—we spend time in the field helping troubleshoot, adjust screw designs, and optimize additive packages. In one case, a customer scaling up multilayer film lines with LC565 called in with an unplanned issue during transition. Our technical group visited to review real-time output, discovered a hopper bridging challenge, and proposed cooling granule flow using air curtains. This hands-on approach led to smoother runs and actually sped up production over original targets.
Long-term value shows in customer loyalty and repeat orders. We’ve supported large multinational converters and niche specialty compounders, with many returning as their finished goods expand into new markets. In flexible packaging, one customer grew from testing single cases to year-round demand across all their lines—a shift that drove us to ramp reactor output and improve our own process controls. Every new application brings unique challenges, and our R&D staff works hand in hand with customers to meet them, sometimes by blending LC565 with specialized fillers or compatibilizers, sometimes by helping commission new lines with optimized heat profiles.
Elastomers like LC565 reflect the demands of the industries they serve. Markets keep changing, and so do the expectations for performance, cost, and sustainability. We watch regulation, consumer trends, and competitor moves, taking real lessons back to our process teams. So many applications—auto, cables, packaging, adhesives—have found new advantages in LC565, whether tightening tolerances, holding color longer, or cleaning up at the end of each run. It’s a dialogue between manufacturer and user, and we keep that channel open to keep raising the bar.
Investing in better POEs isn’t about hype or sales language—it’s about actual results for engineers, operators, and business managers. After standing alongside countless customers through line trials, bottleneck trouble-shooting, and quality audits, we’ve seen how a product like LC565 can shift not just process efficiency but the bottom-line economics of finished goods. As a manufacturer, we know the stakes go beyond a single batch or claim. Delivering consistent elastomer performance, backed by proven plant data and field experience, builds trust that carries forward. We keep refining LC565 as applications shift, drawing on facts and real operations, making sure it remains at the front of POE innovation—and, most importantly, delivers value customers can see on their lines every day.