| HS Code | 733220 |
| Chemical Formula | (C2H4)n |
| Density | 0.910-0.940 g/cm3 |
| Melting Point | 105-115°C |
| Glass Transition Temperature | -110°C |
| Tensile Strength | 8-12 MPa |
| Elongation At Break | 300-650% |
| Thermal Conductivity | 0.33 W/mK |
| Water Absorption | <0.01% |
| Flammability | High |
| Transparency | Translucent |
| Flexural Modulus | 200-400 MPa |
| Hardness Shore D | 42-48 |
| Chemical Resistance | Excellent (many acids, alcohols, bases) |
| Impact Strength | Very high |
| Electrical Resistivity | 10^17 Ω·cm |
As an accredited LUTENE LDPE (Low Density Polyethylene) factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | LDPE is packaged in 25 kg moisture-resistant, sealed plastic bags with clear labeling for identification and safe handling during transport. |
| Container Loading (20′ FCL) | The 20′ FCL container for LDPE accommodates around 23-26 metric tons of low-density polyethylene resin packed in 25kg bags. |
| Shipping | LDPE (Low Density Polyethylene) is shipped in granule, pellet, or powder form, typically packed in 25 kg bags, bulk bags, or silo containers. It should be kept dry and protected from direct sunlight, heat, and moisture. Standard transport includes trucks, containers, or rail, following safety and environmental regulations. |
| Storage | LDPE (Low Density Polyethylene) should be stored in a cool, dry, and well-ventilated area, away from direct sunlight and heat sources to prevent degradation. Keep material in tightly closed containers or original packaging to avoid contamination. Store away from strong oxidizing agents and combustible materials. Ensure storage areas are free from ignition sources and clearly labeled to prevent mishandling. |
| Shelf Life | LDPE typically has an indefinite shelf life under proper storage conditions, remaining stable, non-reactive, and resistant to degradation over time. |
LDPE is a critical polymer material with extensive industrial usage. Its impact resistance, flexibility, and chemical resistance make it a preferred raw material across diverse manufacturing sectors. Below, we detail real-world downstream applications, focusing on the specific compliance requirements, formulation ratios, processing steps, and resulting product types.
Paper packaging producers use LDPE for extrusion coating to provide moisture barriers on products such as liquid cartons, fast food wraps, and industrial bags. This application leverages LDPE’s melt flow and adhesion properties, ensuring effective lamination onto paper substrates while maintaining food safety and mechanical integrity through high-speed continuous processing lines.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Film manufacturers utilize LDPE as a primary feedstock in blown film extrusion for bags, liners, stretch wrap, and agricultural film. Its processability allows for the production of films with precise thickness control and mechanical properties suitable for a range of load-bearing and barrier functions, from consumer food bags to industrial stretch films.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Injection molding operations in consumer and specialty goods sectors rely on LDPE for its low viscosity, impact resilience, and suitability for thin-walled components. LDPE delivers fast cycle times and consistent flow, essential for mass production of caps, closures, containers, and handles with precise tolerances and reliable mechanical performance.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
The electrical industry uses LDPE as insulation and sheathing for low and medium voltage cables due to its electrical resistance, moisture barrier, and dielectric strength. Flexible processing allows for both single-core and multi-core wire applications, maintaining safety and longevity under varied installation and ambient conditions.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Rotomolding processors use LDPE for manufacturing large hollow items, including storage tanks, bins, and logistical pallets. Its high impact strength and cold temperature performance allow products to maintain shape and structural integrity under load and during drops, supporting industrial applications that require ruggedness and chemical resistance.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Manufacturers convert LDPE into closed-cell foam sheets for applications including sports mats, protective packaging, and automotive insulation. The material’s light weight and shock absorption properties are achieved through precise control of blowing agents and crosslinking additives during continuous extrusion, resulting in sheets and rolls of consistent thickness and rebound.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive LUTENE LDPE (Low Density Polyethylene) prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8618018036652
Email: sales6@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Walking through the polymerization hall, you get a sense of how vital LDPE has become. Over many years, our plant’s reactors have turned out grades of Low Density Polyethylene that meet the changing needs of industries both big and small. Our team spends long hours calibrating temperatures and pressures. We do this so manufacturers who rely on steady, easy-processing material can keep their lines running without headache.
We produce our LDPE pellets from ethylene using high-pressure tubular and autoclave reactors, a method that has seen decades of refinement. Our models cover a spectrum: extrusion blow molding, injection molding, sheet extrusion, film blowing. The tradition starts with a feedstock that’s clean and consistent, always tested for purity, and we follow through until every bag of resin meets the same high standards in melt flow rate, density, and appearance.
Most folks in plastics know LDPE for its “soft” touch—meaning real-world flexibility, translucency, and a resilience to impact that tougher linear materials don’t always deliver. If you’ve ever handled a squeezable bottle or peeled back a plastic wrap, odds are good you’ve used LDPE.
Our resins, across grades, typically range in density from about 0.915 to 0.930 g/cm³. We’ve seen our 18 MI to 2 MI grades pressed into film for packaging bread or dry goods. If higher rigidity is needed, we suggest a slightly denser option. Lower melt index works best for liners or thick products that demand durability and less flowability. The processing temperatures usually sit in the range of 160 to 220 degrees Celsius, and our line operators work with control panels to adjust for extrusion speed, resin temperature, or the cooling rate—all of which shape the final properties.
The beauty of LDPE production is that it does not require exotic plant design or expensive catalysts. Chemically, it’s a long chain branching polyethylene, formed under high pressure, which creates uniquely spaced side chains. These branches let the material bend without cracking, resisting stress fracture and tearing when pulled, folded, or crumpled.
We offer several popular models, and their differences come down to melt flow and density. For blown film, our E1801F grade has delivered dependable clarity and good bubble stability. For wire and cable-coating, higher MI grades reduce die drool and support fast line speeds.
Over the years, food contact film has grown to dominate our LDPE output. Supermarkets require rolls that open easily without sticking. Our plant operators check for “blocking” and “slip” properties on every batch, tuning additives just enough to make bags peel off each other, but not so much that sealing becomes faulty. Blown film lines, especially, demand a well-controlled gel content. We test this by cutting samples and melting them between glass plates, searching for particles. Customers making shrink film, agricultural mulch, bubble wrap, or protective packaging all appreciate film with consistent thickness and puncture resistance.
Lamination grades fill the role in drink cartons. Low gel count means less chance of leaks. Fast cooling gives a good gloss for printability—a trait our customers in dairy packaging point out every year. Injection molding grades get used less, but still find their way into closures, soft caps, and lightweight parts where a stiff resin would risk snapping.
We run extruded sheet models as well, which end up in automotive interiors, medical pads, and flexible lids. Foam extrusion using LDPE helps produce products that need soft cushioning—from sports mats to trays that absorb shocks.
Some customers ask how LDPE differs from HDPE or LLDPE. We answer by showing samples. HDPE (High Density Polyethylene) feels rigid and has less give. You can hear the difference if you tap HDPE and LDPE bottles together: LDPE makes a dull, soft sound, while HDPE clicks. Chemically, LDPE’s long branches cause molecules to pack less closely—this is what makes LDPE softer, more transparent, and stretchier. HDPE is tough, stiff, and more likely to crack than to dent when under strain.
LLDPE (Linear Low Density Polyethylene) sits in between, offering some toughness of HDPE, and some processability of LDPE. It’s popular for stretch wrap, and often gets blended into LDPE film for cost or puncture strength. In actual plant runs, LDPE tends to be more forgiving in processing. Our operators see fewer line slowdowns, and let us run at wider windows of temperature.
Quality control means more than just numbers. We screen for pellet uniformity and contamination before loading bags. Our runners walk the lines and scoop grains from finished resin, checking for discoloration, foreign matter, or “fisheyes” that could signal contamination. Each grade carries a melt index range, measured on our in-house plastometer, checked daily. Our QC keeps an eye on tensile strength, dart drop for film, and impact resistance for thick extrusions.
Transport isn’t taken lightly. LDPE absorbs little moisture, so we stack and store it with basic covers in the warehouse. Some producers using recycled regrind appreciate LDPE’s resilience because it tolerates small inconsistencies in scrap feed, making it a steady base for lower-grade blends.
Waste management also matters on our site. Scraps from trimming, filter purges, or batch ends get sent back for re-processing, not trashed. This keeps input costs low and eases downstream recycling for film producers and reprocessors.
Heat stability and gel control are the most discussed issues in LDPE film production. Tiny cross-linked gels, formed when resin sits too long in the process, create thick spots that can tear thin films. We invest in advanced filter and screen changers on the extrusion lines. These remove oversized or degraded particles before pellets leave our system. Our engineers study shear forces inside the extruders, modifying screw designs and increasing mixing zones, so resin temperatures rise just enough to flow but not burn or degrade.
Batch-to-batch repeatability is another ongoing effort. Even small shifts of a melt index can mean blocked lines or rejected rolls of film. We limit operator variation by automating operator panels, using more sensors, and constantly re-training staff. Our lab rechecks every lot to stop mistakes from reaching the market.
We see volatility in feedstock price every year. When ethylene prices climb, we make it a routine to optimize plant energy and water use, recycle any heat where possible, and improve yield by reducing off-grade lots. Years of steady operational improvement have kept us competitive even during sharp swings in raw material costs. Investing in energy-efficient extruders, in combination with operator upskilling, means our plant can keep producing LDPE at a lower cost per ton than many earlier generations of plants.
As single-use plastics face scrutiny, LDPE remains relevant thanks to its ability to run well with recycled content. Our R&D team is constantly evaluating post-consumer recycled blends, aiming to keep film clarity and strength as close to virgin as possible. We’ve had success supplying customers who make agricultural film, collection bags, and garbage liners that use up to 30% recycled content without losing significant properties.
In medical packaging, LDPE’s pure polymer backbone, absence of odor, and chemical resistance have kept it a trusted choice for years. We maintain extra clean lines for medical- and food-contact resin, regularly testing for residual catalyst or trace impurities. Some of our output finds its way into pharmaceutical blister packs, IV bags, and soft medical tubing where gentle flexibility and leakproof seams matter most.
In some advanced cable applications, LDPE’s dielectric properties are prized for jacketing and insulation, particularly where ease of cable stripping, weather resistance, and clean extrusion counts. It’s still a standard in many old-school coaxial and signal cables.
Film blowing with LDPE remains an art as much as it is a science. Every operator has seen the difference that a slow-acting screw or a slightly uneven die can make in film clarity or strength. On hot summer days, we notice that cooling air, humidity, and line speed together make more of a difference than feedstock. Our operators routinely adjust nip roll spacing or add anti-block agent to respond quickly.
With blown film, gelling remains a chief concern. We replace filters sooner and keep a sharp eye on melt temperature and residence time. Preventive maintenance on extruders means fewer surges in throughput and a tighter range of properties. Operators have learned that resin post-treatment—like pellet cooling and screening—gives customers an easier-to-handle pellet sack.
In the world of extrusion coating, especially when applying LDPE to board or foil, the speed difference between high MI and low MI grades is never theoretical. As we and many customers have found, thin coatings depend on rapid solidification and require consistent output from the resin hopper to the die, minute by minute.
LDPE finds itself in the crosshairs of single-use plastic debates all the time. From our perspective, one answer lies in resin design for recycling. We focus on grades that resist degradation after processing so the polymer chains can withstand an extra melt without losing flexibility. Even a 30% improvement in post-consumer recyclability for film means hundreds of tons saved from landfill.
We do not use additives that would block downstream recycling. At the same time, we work with regional recyclers to ensure that our grades blend cleanly into mixed streams—bags and film waste get processed locally into garbage sacks, construction sheeting, and some agricultural protection.
We track solvent and water use closely. LDPE does not demand solvent during processing, reducing VOCs versus other resins. We have cut water consumption in pellet cooling and upgraded closed-loop cooling to further reduce impact on local water resources. This habit translates into more sustainable production and meets growing customer demand for transparency.
Government and customer scrutiny of food packaging safety has pushed us to double down on quality protocols. Our food-contact LDPE grades are tested for extractables, odor, and overall migration, keeping them well within global standards. We test all raw materials for regulated chemicals and avoid phthalates entirely.
Regulatory trends shift year after year. We make sure every batch meets local and export standards—be it for toxicity, heavy metals, or polymer purity. That includes testing for residual metals from catalysts as well as screenings for micro-particles that could impact food safety. This helps build trust with converters, packagers, and ultimately, consumers.
Fire safety also stands out in our daily operation. LDPE burns when ignited, so plant safety routines include dust control, flame-proof motors, and antistatic grounding wherever pellets accumulate. Staff undergo regular safety training on handling polymers and emergency response drills, both for line workers and technicians.
Every time a customer calls with a production snag, it speaks to us as operators too. Maybe a film is blocking and not opening, maybe clarity drops suddenly, or a weld seam fails on an automated bag machine. Our technical staff have spent years troubleshooting these problems—from answering questions about additive choice to inspecting samples fresh off a roll.
Transparent feedback comes back to us. Customers move faster when we can supply direct answers based on shop-floor reality. Explaining why a higher slip agent concentration causes sealing issues, or which grade handles a twelve-hour run best, brings us closer to them.
Regular visits to customer sites give our technical teams direct access to real process issues and improvement opportunities. We keep samples of customer films, bottles, sheets, and parts as learning references, sparking ideas for new runs. Our QA team attends to these issues with follow-up analyses—melt index, gel count, optical clarity, seal strength—all done in our in-house labs.
Through decades, LDPE continues to find new applications, riding the wave of packaging trends, environmental needs, and shifts in retail and industrial delivery. Our plant’s LDPE has played a behind-the-scenes role in producing bread bags, shrink covers, medical devices, irrigation tubes, insulated cables, soft-touch packaging, and daily-use goods that millions rely on.
Practicality gives LDPE its staying power. Processing ease, damage tolerance, chemical neutrality, and flexibility—these drive converters to come back to us again and again, regardless of swings in price or regulatory demands. Our job as manufacturers is to keep refining every step, draw on hands-on learning, and support customers with direct experience.
We build LDPE for real-world conditions, for operators and converters who value steady performance, not marketing promise. Every batch leaving our plant reflects years of steady effort and ongoing learning—in sourcing, production, quality checks, sustainable design, and timely service. Those who work with LDPE every day know that what matters is not just the technical specs, but reliability, resilience, and the people who back it up.