| HS Code | 550113 |
| Polymer Type | PPS/SPS compound |
| Brand | LUSEP |
| Density | 1.34-1.56 g/cm³ |
| Tensile Strength | 60-110 MPa |
| Flexural Modulus | 2.5-10 GPa |
| Elongation At Break | 2-30% |
| Heat Deflection Temperature | 220-260°C |
| Flame Retardancy | UL94 V-0 |
| Water Absorption | ≤0.1% |
| Electrical Resistivity | ≥1×10¹⁶ Ω·cm |
| Filler Content | 0-65% |
As an accredited LUSEP (PPS / SPS compound) factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | LUSEP (PPS/SPS compound) is packaged in 25 kg net weight, moisture-resistant, multi-layered PE-lined kraft paper bags with clear labeling. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL) for LUSEP (PPS / SPS compound): Typically loaded 18-22 tons, securely packed in bags or pallets, moisture-protected. |
| Shipping | LUSEP (PPS/SPS compound) should be shipped in tightly sealed, clearly labeled containers, protected from moisture and physical damage. Store and transport in a cool, dry, well-ventilated area away from incompatible substances. Follow all relevant safety, handling, and regulatory guidelines, including proper documentation and labeling for chemical transport. |
| Storage | LUSEP (PPS/SPS compound) should be stored in a dry, well-ventilated area away from direct sunlight, heat sources, and moisture. Keep the material in tightly sealed, original packaging to avoid contamination. Ensure the storage area is free from acids, oxidizing agents, and strong chemicals. Recommended storage temperature is between 5°C and 35°C to maintain product quality and integrity. |
| Shelf Life | LUSEP (PPS/SPS compound) typically has a shelf life of 12 months when stored in cool, dry, and unopened conditions. |
LUSEP, a proprietary polyphenylene sulfide (PPS) and syndiotactic polystyrene (SPS) compound, serves high-performance demands across multiple advanced sectors. We engineer our material for exceptional heat resistance, mechanical strength, and chemical stability, ensuring consistent results at every production stage. Below are detailed applications for LUSEP in key industrial segments, reflecting real-world downstream integration.
Automotive manufacturers use LUSEP in the design of high-temperature electrical connectors, sensor housings, and fuse boxes. Its inherent flame resistance and dielectric properties withstand demanding under-hood conditions and meet critical automotive testing requirements. Our customers implement this compound in parts requiring high dimensional stability under thermal cycling, particularly where conventional polymers degrade. LUSEP’s resistance to automotive fluids and solvents prolongs component lifespan and helps carmakers meet long-term quality targets.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Appliance manufacturers select LUSEP for heating element housings, microwave oven parts, and dishwasher internal components due to its ability to retain mechanical properties at elevated temperatures and resist hydrolysis. The compound enables reliable and repeatable part production, supporting batch-to-batch uniformity and strict defect tolerance targets. Consistent heat aging performance and outstanding electrical insulation help minimize field failure rates during consumer and commercial use.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Producers of electronic equipment use LUSEP for components like coil formers, terminal blocks, and battery carrier frames. Its dimensional precision and stable insulating performance enable miniaturized electronic assemblies meeting high-density configuration demands. LUSEP withstands typical soldering and reflow temperatures during PCB population, without significant deformation or outgassing that could impact circuit quality or cause defects in insulated paths.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
LUSEP exhibits high resistance to chemical corrosion, making it a preferred material for manufacturing pump bodies, valve seats, and filter cartridges exposed to aggressive acids, bases, and solvents. Downstream processors value its creep resistance and structural integrity in assemblies operating at elevated temperatures and pressures for water treatment, chemical processing, or semiconductor fluid management. The stable molecular weight reduces downtime due to part warpage or unexpected failures.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
LUSEP is used by lighting component manufacturers in reflector bases, LED lamp holders, and circuit mounting trays where sustained UV and heat exposure is critical. Its white colorability and fiber compatibility allow high reflectance, while the stability against thermal degradation ensures prolonged luminaire service life. The compound minimizes the risk of warping or yellowing, essential for architectural and sealed commercial lighting designs.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Producers of advanced water filtration and metering systems select LUSEP due to its hydrolysis resistance, low extractables, and compatibility with potable water. Regulatory compliance, dimensional precision, and prolonged mechanical reliability support cost-efficient field installations and reduce routine maintenance requirements. The compound’s inertness in chlorinated and non-chlorinated systems supports consistent water flow and purity for municipal, industrial, and domestic water distribution infrastructure.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive LUSEP (PPS / SPS compound) prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8618018036652
Email: sales6@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
LUSEP has developed over years of close work between polymer chemists and plant engineers, with feedback from assembly technicians, molders, and designers who demand one thing at the end of the day: a plastic compound that delivers reliability under heat, pressure, and harsh chemicals. We began refining our PPS/SPS compounds with an honest assessment of where standard thermoplastics start to crack—literally and figuratively—under real-world conditions. Here’s what separates the LUSEP line from more generic material and why customers in automotive, electronics, and industrial sectors keep asking for these compounds by name.
PPS, short for polyphenylene sulfide, has been a backbone material for automotive under-the-hood parts, solenoids, and pump housings for decades. SPS, or syndiotactic polystyrene, brings low water absorption and remarkable insulation. LUSEP blends and co-compounds the best of both to achieve properties that impact actual performance: exceptional hydrolysis resistance, thermal stability above 200°C, dimensional retention, and dependable electrical insulation even under continuous operation.
A lot of published data highlights a compound’s tensile strength or flexural modulus, but from years of field reports, we know customers value LUSEP for its ability to run in tough assembly conditions without warping after repeated on–off cycles or sudden heats. Our plant has set up specific compounding lines equipped with twin-screw extruders, allowing tighter control over glass fiber dispersion and additives, which translates into superior mechanical behavior—especially long after the warranty period ends.
LUSEP compounds address a particular headache for PCB designers and power module engineers: surface tracking, flashover, and insulation breakdown. Unfilled or basic filled PPS and SPS can start to lose insulation properties under high humidity, but LUSEP’s tailored grades, using unique filler technology, keep comparative tracking index (CTI) values above industry benchmarks.
Many customers in E&E come to us with parts exposed to solder reflow, with temperature spikes above 270°C for a short window. LUSEP grades hold up without shifting in shape or sagging. That directly impacts yield, especially for tight-tolerance housings and relay bodies where even a half-millimeter deformation means rework or scrap. Our technicians constantly tweak glass content, flame retardants, and processing stabilizers in response to both internal testing and field failures our customers face.
Any manufacturer in the auto sector knows that under-the-hood temperatures and unpredictable chemical splashes challenge basic thermoplastics. LUSEP’s PPS backbone shrugs off brake fluids, coolants, and hydraulic oils. SPS modifiers add to the mix by reducing both weight and water uptake—critical for multi-year engine use. Unlike generic PPS, LUSEP grades reduce creep at points under clamping force, helping maintain torque and compression seal after thousands of thermal cycles.
What really pushes LUSEP ahead is our ability to offer models fit for specific functions. For example, LUSEP 615GF35 brings 35% glass fiber loading and is trusted for powertrain parts that see mechanical and chemical abuse day in, day out. Meanwhile, an SPS-rich variant, LUSEP 550FR, meets stricter flame retardance for switchgear without halogen content, which keeps both regulatory and environmental teams satisfied.
Molders talk about batch-to-batch variability with other products. The chemical factory floor does not have room for guesswork. A failed batch means lost uptime—no one wants to discover issues during a 10,000-shot run. Our LUSEP lines run tough real-world tests: multiple melt index checks per shift, careful dosing of stabilizer and filler, and post-compound moisture conditioning. That’s how we’ve managed to keep deviations in glass and mineral content under one percentage point over multiple years of audits.
Because of these controls and our digital tracking system, users see less burn mark formation, more consistent color, and lower scrap during injection. LUSEP offers tight viscosity control; we regularly receive feedback from Tier 1 suppliers that cycle times decrease and finishing defects drop. For automotive headlamp brackets, relay base housings, and pump impellers, this means durable, predictable parts that keep assembly lines running.
Direct comparisons drive purchasing. Nylon (PA66 and PA6), PBT, and standard PPS are common alternatives. Nylons draw in too much moisture and warp during weathering or after steam cleaning. PBT offers good chemical stability but starts to lose strength as it ages near the 140°C mark—well below LUSEP’s threshold. Basic PPS manages chemicals fine, but subtle differences in compounding make a world of difference. Factory-trialed LUSEP grades outperform competitors thanks to clean feedstock selection and our proprietary blending procedures.
Specialty suppliers sometimes market high-filler PPS blends that can feel similar in spec sheets. LUSEP keeps a balance between rigidity and processability, so molders don’t face constant tool wear or clogging from abrasive fillers. We pioneered mineral- and glass-hybrid blends, resulting in grades with less warpage and less voiding during cooling—a pain point for anyone running precision connectors or multi-cavity molds.
Manufacturers need more than just a one-off sample. Our factory maintains multi-ton annual output capacity, supported by input QC. Fielding requests for short lead-times, we keep on-site feedstock reserves to respond to urgent project changes or breakdowns in downstream mold shops. It takes time to earn that kind of trust; we’ve gradually earned large-volume orders from automakers during unplanned ramp-ups and supply chain squeezes.
Switching over a line to a new compound might risk blockage, color streaks, or missed mechanical targets. LUSEP’s processing window eases changeovers, so toolmakers can drop in new material with little waste. On-the-ground tech support is built in—we send line pros for troubleshooting and adjustment, not phone agents with scripts. Over years and thousands of ton lots, our partners know that quick answers from our plant engineers keep breakdowns to a minimum, whether it’s a pigment tweak, anti-static agent adjustment, or gate design refinement in the mold.
Factories see repeat orders from customers only when material proves itself year after year, not just over a few weeks of lab tests. LUSEP has run through cycle testing far beyond regulatory minimums—both in our own test bays and with third-party labs. Parts molded from our material withstand years of temperature cycling, prolonged coolant exposure, and repeated electrical surges without embrittlement or surface tracking. There’s a reason relay manufacturers and sensor housers return to LUSEP for next-generation designs instead of jumping to newer, unproven plastics.
Some OEMs test mechanical retention and chemical attack together. LUSEP compounds don’t just pass—they do so with margin: less weight loss, fewer microcracks, and better surface integrity. That’s thanks to our focus on input purity and tight process control, a lesson learned from contracts that failed years ago using batch-fluctuating imports. When fielded for five, ten, even fifteen years, these details prevent headaches and warranty claims.
Not all high-performance compounds reach the tight standards for high-voltage parts, precision gears, or water-contact compliant components, but LUSEP covers the full spectrum. For high-voltage switchgear and busbar insulation, our FR grades consistently reach V-0 class without heavy-metal additives. Water-contact components, such as certain pump or valve housings, rely on LUSEP’s ability to stay stable under chlorinated and hot water—based on back-to-back plumbing cycle testing in both Asia and Europe.
We don’t just offer one generic grade. LUSEP’s lineup includes multiple product codes, such as 613CF20 for carbon-fiber-reinforced anti-static housings, and 550UL for high-temperature, low-outgassing electronics parts. The flexibility for both high mechanical demand and specialty compliance comes from our willingness to re-blend, tweak stabilizer packs, or change glass fiber source as needed. That’s something made possible by actually running the compounding lines ourselves, not relying on a broker or offsite blenders.
Like all modern chemical producers, we recognize rising pressure for cleaner, more responsible outputs. LUSEP production has shifted partially to recycled-source feedstock where physical and electrical demands allow. Our compliance office regularly tests lots for RoHS, REACH, and halogen-free labeling. Third-party labs check batches for heavy metals and persistent organic pollutants, so our customers have no hesitation selling products worldwide. Automakers and E&E giants both continue tightening their supplier requirements, and LUSEP passes audits by leaning deep into full line traceability and supplier declarations.
Sustainability does not mean cutting corners. Over the last five years, we’ve managed to improve waste pellet recovery and optimize batch sizes so less off-grade material goes to landfill. Wherever properties line up, bio-attributed feedstock trials are running, especially in less performance-critical components. On the compliance side, LUSEP has met requirements for flame retardance, outgassing, and even advanced automotive OEM standards that push far beyond what standard commodity PPS or SPS can offer.
Some of the most valuable feedback does not come from the boardroom but from tool setters, QC managers, and operators on the factory line. Teams assembling industrial relays noticed less downtime after switching to LUSEP 615GF30, due to fewer shorts caused by surface contamination. Automotive technical managers tell us that LUSEP 550FR passed extended coolant exposure tests without the clouding or crazing seen on past parts. In meter box retrofits, installers now favor our PPS/SPS compound for terminal blocks, which handle both screw torque and high current without discoloration, even in coastal locations.
This kind of day-to-day performance earns loyalty. LUSEP did not start as the lowest-priced option. Buyers pressed us to cut cost, but once parts started passing quality gates and fielded for years, the long view won out. Less downtime, fewer returns, and quieter customer service lines end up costing less than constant spot-fixes and recalls. The message from downstream plants resonates: reliability in parts translates to hours saved, confident launches, and repeat contracts.
Molders demand compounds that can handle a range of temperatures, injection speeds, and part thicknesses without blisters, streaks, or voids. LUSEP answers with a broad melt window and stable viscosity across different shot sizes. Process techs regularly send us updates from factory runs, and we respond by refining masterbatches or tweaking lubricant levels. We have cut down start-up scrap for users by helping fine-tune cycle settings, not just shipping a standard TDS and leaving them to it.
Designers pushing the limits with thin-wall connectors or precision gears provided feedback that certain glass-fiber blends held sharper edges and resisted sink marks longer. In hearing customer needs, we rolled out grades specifically for micro-molding, where even a thin hair of flash can scrap a whole batch. This boots-on-the-ground approach, fed back into compound tweaks, shapes what goes out our doors next.
Being a chemical manufacturer means more than extruding pellets and shipping boxes. Ongoing partnerships with customers—including on-site trials and failure analysis—help our own chemists anticipate where new challenges will emerge. Recently, EV component designers demanded even higher thermal and dielectric protection; our answer involved not just tinkering with flame retardant package, but investing in new pilot compounding equipment that opens up more options for tricky hybrid filler systems.
Supporting innovation also means responding quickly when things go wrong. Scrap investigations from one auto supplier led us to trace a rare lot of off-grade glass fiber, allowing us to fix the problem within a single production shift. That agility comes with running your own compounding lines and knowing every input, not simply reselling bags from another source. Through all of this, LUSEP keeps evolving as we stay in touch with actual end-user pain points.
From the earliest trials on a single-line extruder to today’s multi-silo systems and barcoded lot tracking, LUSEP’s progress mirrors the lessons learned by the whole chemical manufacturing sector. We listen when operators call out new defects, we sit with designers who push parts beyond their expected loads, and we adjust our line processes based on true-to-plant conditions.
Every part leaving a tool shop stamped from LUSEP tells a story—sometimes quiet, sometimes the result of persistent troubleshooting, and always the outcome of manufacturing knowledge built by hands-on people, not distant marketers or brokers. That’s what makes LUSEP more than just a line on a quote sheet; it’s a compound forged for the real-world messiness of industry, batch after batch, year after year.