| HS Code | 582377 |
| Product Name | LUPOY Polycarbonate (PC) WSRE0000296 |
| Manufacturer | LG Chem |
| Material Type | Polycarbonate (PC) |
| Melt Flow Rate | 10 g/10 min (300°C/1.2kg) |
| Density | 1.20 g/cm³ |
| Tensile Strength | 62 MPa |
| Flexural Modulus | 2,300 MPa |
| Heat Deflection Temperature | 138°C (0.45 MPa) |
| Transparency | High |
| Ul Flammability Rating | V-2 (1.5mm) |
| Water Absorption | 0.15% (24h, 23°C) |
| Processing Temperature | 260-300°C |
As an accredited LUPOY Polycarbonate (PC) WSRE0000296 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | LUPOY Polycarbonate (PC) WSRE0000296 is packaged in a 25 kg white, industrial-strength bag labeled with product and safety information. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL) for LUPOY Polycarbonate (PC) WSRE0000296: 16–20 metric tons per container, packed in 25 kg bags. |
| Shipping | LUPOY Polycarbonate (PC) WSRE0000296 is shipped in sealed, moisture-proof bags or drums to ensure product integrity. Containers are clearly labeled and secured on pallets for safe transportation. Standard shipping conditions recommend storage in cool, dry areas, away from direct sunlight and incompatible substances, following all regulatory guidelines for handling plastic resins. |
| Storage | LUPOY Polycarbonate (PC) WSRE0000296 should be stored in a cool, dry, well-ventilated area away from direct sunlight and sources of heat or ignition. Keep the material in its original, tightly sealed packaging to prevent moisture absorption and contamination. Avoid exposure to strong acids, alkalis, and oxidizing agents. Proper storage ensures optimal material performance and longevity. |
| Shelf Life | LUPOY Polycarbonate (PC) WSRE0000296 typically has a shelf life of 24 months when stored in cool, dry conditions. |
LUPOY Polycarbonate (PC) WSRE0000296 enables high value in specialized industrial production through its unique mechanical, optical, and thermal properties. As the direct producer, we deliver fully traceable, process-grade polycarbonate resins meeting stringent demands across electrical, automotive, medical device, and consumer products industries. Below, we detail real downstream application areas, compliance needs, formulation benchmarks, processing integration points, and representative finished goods.
Automotive exterior and interior lighting manufacturers specify this grade of polycarbonate due to its UV stability, high transparency, and moldability. The resin processes efficiently into headlamp lenses, indicator covers, and daytime running light diffusers, supporting scratch-resistant coatings and precision optical geometries. Downstream production lines prioritize rapid injection molding cycles and strict haze/yellowing control, integrating online visual and dimensional QC for every lot.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
The electrical industry uses our material for control panel housings, circuit breaker shells, and high-performance connectors, where insulation performance and fire retardancy are critical. This application leverages the polycarbonate’s dimensional integrity and flame resistance, especially for MCBs, distribution boards, and power strips. Mold shops maintain specialized mold temperatures and gating to prevent stress whitening and ensure full cavity fill for thin-walled parts.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Medical OEMs integrate this polycarbonate grade in non-implantable device shells, blood filtration housings, and clear instrument covers. It supports medical molding best practices, resisting gamma and ethylene oxide (EtO) sterilization cycles. Manufacturers use specialized demolding and annealing steps to minimize residual stress, maintain transparency, and avoid microfracture propagation through repeated sterilizations. Production cells operate under controlled cleanroom environments and batch-level traceability for every pellet lot.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Disc manufacturers require thermally stable, optically pure polycarbonate for compact discs (CD), digital versatile discs (DVD), and Blu-ray substrates. The resin’s low residual birefringence and light transmission support high-density data writing, and its flow properties enable thin-disk pressing with micron-level accuracy. Clean-extrusion and high-pressure injection or compression molds run at tight temperature and humidity windows to prevent dust, bubbles, and warping.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Polycarbonate delivers required impact resistance, clarity, and anti-shatter safety in architectural glazing, machine guards, and security windows. Converters extrude or laminate this material into multiwall panels, flat sheet, and bullet-resistant units for commercial and critical infrastructure. Batching includes UV absorbers or abrasion-resistant coatings as needed for outdoor applications. Plant QC features repeated ball drop, forced entry resistance, and long-term light transmittance testing every shift cycle.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive LUPOY Polycarbonate (PC) WSRE0000296 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8618018036652
Email: sales6@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Working long shifts in compounding halls and monitoring melt flows gives a person a true sense of what it means to match process consistency with real-world expectations. We launched LUPOY Polycarbonate WSRE0000296 not just to meet an order, but because seasoned hands in fabrication lines kept mentioning the same issues—fragility under repeated impact, hazy clarity in transparent pieces, and unpredictable stress responses in end-use parts. This grade emerged through steady effort addressing those manufacturing bottlenecks in thousands of hours spent testing raw materials, tweaking extrusion, and evaluating every shipping lot with the same meticulous attention.
The value shows up early in production. WSRE0000296 brings a high-flow characteristic that reduces downtime caused by melt clogging and vapor build-up. Process engineers will recognize the familiar challenge: holding down a spec on wall thickness without driving up reject rates. This polycarbonate delivers a window of workable viscosity that keeps press speeds up. The resulting cycle time advantage frees up bottleneck mold machines, which matters directly to managers charting real productivity upticks.
We see the proof in the pieces. This lot produces optical-quality transparency, which decorators and finishers use in vehicle light housings, electronics covers, and other applications where clarity can’t be an afterthought. Its ability to absorb repeated shocks without cracking has meant some of our automotive accounts have shifted more of their interior and exterior components over from acrylics or brittle, older polycarbonate grades. In our own drop tests and accelerated weathering cycles, we saw fewer spiderweb fractures across molded sheets even when we raised impact energies that would have split standard PC chips.
Anyone who has run a polycarbonate through an injection line knows that minor fluctuations in pellet moisture or temperature can spell big differences in finished part quality. At our facility, we keep no secrets: WSRE0000296 stays easy to dry and holds up well during screw transfer, even at elevated processing speeds. Not all PCs behave this well—our own troubleshooting in earlier formulations taught us the value of tighter compounding tolerances and careful reactor management.
We use real-world conditions in trial runs. The resin flows smoothly through hot runners and open gates without burning or yellowing, which keeps color control and surface appearance within tight targets. In deep-draw molding for electronic device fronts, the material resists flow lines and sink marks. These details seem technical until a whole batch is at risk of rework or scrap, which costs time and trust for every operator on the floor.
Our team continues to measure impact strength, heat resistance, and tensile elongation with calibrated equipment in house. LUPOY Polycarbonate WSRE0000296 consistently reaches a high notched Izod impact value, meaning finished parts shrug off drops and accidental collisions in the field. Glass transition points remain stable across batches, so thermal deflection worries become less of a recurring phone call for OEM buyers.
The resin withstands elevated service temperatures for extended periods without losing its shape or gloss. This matters most in lighting fixtures, automotive dashboards, and housings for sensitive electronics—where even a few degrees of deformation can lead to part failures. In our own environment-stress evaluations, dimensional stability stays in check during prolonged cycles in high-humidity chambers. Pieces do not warp from moisture pick-up or outgas unpredictably, which also makes finished goods safer in tightly-sealed assemblies.
There’s a reason old habits die hard in plastics; some buyers will choose historical grades they trust, assuming new offerings might disrupt the line. We put LUPOY PC WSRE0000296 against legacy polycarbonate resins because there’s no shortcut to credibility. The key strengths come through in both molded samples and finished parts: less brittle failure under high-load tension, better clarity at high-wall thicknesses, and improved extrusion profiles at the line speeds modern factories demand.
Traditional polycarbonate resins tend to lose edge clarity or haze over when pushing thicknesses above 6mm, especially in optical applications. With our grade, we see a lower internal stress profile that translates into resilient, see-through panels. Operators can cut, drill, and route molded parts with fewer crack-outs and edge chips, a difference our long-term sheet fabricators point out after months of use, not just a few tool passes.
We see LUPOY Polycarbonate WSRE0000296 move quickly into applications where functional and visual properties meet sharply. It has become a choice resin for molded covers of medical diagnostic equipment, not only for its resistance to chemical cleaners but also for the impact toughness that keeps devices operational between users. In our years of experience, we have watched medical sector demand shift rapidly to plastics that can be sterilized without losing transparency or embrittling under heat. WSRE0000296 checks both boxes and holds up during successive cleaning cycles.
Automotive industry needs are rarely forgiving. Even small errors in lens clarity or housing toughness translate into reworking lamp clusters or dash components, which can tie up schedules and strain supplier relationships. Our customers making instrument panels and lighting assemblies have commented that they achieve deeper, bubble-free lens shapes while seeing lower rates of edge fracturing than with older polycarbonate types. This trust, earned in day-to-day use and not only lab claims, comes from the resin’s reliable melt behavior in multi-cavity tools and intricate part designs.
Thermal stability and electrical insulation have been priorities for our clients in the electronics sector. In our own test cells, LUPOY PC WSRE0000296 maintains high dielectric strength panels, making it appropriate for device covers, plug-in relay supports, and circuit breaker housings. Our production lines encounter far fewer cases of short-circuit flashover or carbon tracking, thanks to the resin’s resistance to surface arcing and moisture ingress. These properties are not afterthoughts, but the result of years collecting feedback from customers who troubleshoot real installations, not just sample boards.
Heat generation in compact designs means housings have to handle spikes in temperature without warping or discoloring. From our experience supporting consumer appliance manufacturers, this grade sees less bowing and clouding even after accelerated thermal cycling tests. Our shop-floor experience tells us that ease of demolding and surface finish directly cut rework rates, and our in-process scrap logs on WSRE0000296 have shrunk as a result.
Every year, scrutiny grows regarding plastic waste, recycling potential, and the carbon footprint left by resins. In our facility, we have adopted energy-saving extrusion and pelletizing processes to limit waste and decarbonize output. LUPOY Polycarbonate WSRE0000296 responds well to closed-loop recycling during plant operations. Scrap easily reenters the process without substantial downgrading in final properties, so pallets of off-cuts do not gather dust in the lot or face landfill.
In application, end-product recyclability becomes a meaningful benefit. Device manufacturers and automotive accounts ask us to track regrind performance for returned goods. We have measured mechanical property retention after five reprocessing cycles in our own trials; the material stays tough enough for reuse in secondary goods and less visible structural parts. This reduces overall lifecycle costs and delivers a direct value message to buyers with sustainability mandates.
Makers of safety shields, machine guards, and glazing sheets know the risks that come with bad batches or underperforming resins. Impact failures in those environments never go unnoticed. Over the years, feedback from these customers led us to study long-term stress cracking, resistance to high-velocity impacts, and flame-retardant modification compatibility. LUPOY WSRE0000296 offers a carbon backbone structure that accepts standard FR additives during compounding, without losing flow or clarity. We have partnered directly with users to qualify shielding panels for industrial, transport, and even sports equipment needs, reinforcing the grade’s safety track record.
Our experience with LUPOY Polycarbonate WSRE0000296 goes beyond technical specs. On-the-floor collaboration with toolmakers, part designers, and quality control teams means we adjust and respond to challenges fast. Problems such as stress whitening after snap-fits, gate blush on molded lenses, or static cling in packaging applications have all crossed our desks. Each time, adjustments in formulation or processing conditions helped overcome these stumbles, often before they translated into quality complaints on the customer side.
We run as many trials on commercial machines as we do in our own test center; field feedback gives the truest read on resin behavior in complex molds and secondary finishing. Steady contact with operators and processors brings a level of insight that no brochure can replace. Our technical support team works directly with users to fine-tune drying protocols, adjust shot weights, and maximize the grade’s features on the line, instead of offering generic advice.
Industrial lighting and architectural applications set exacting standards for long-term outdoor performance. Polycarbonate is known for its resistance to yellowing, but not all grades hold up equally under extreme UV and heat. After accelerating weatherability exposure for WSRE0000296, we record minimal haze and color shift, which eliminates frequent warranty claims due to cloudiness or brittleness. Construction project managers and site owners have validated rooftop skylights, signage panels, and architectural glazing made with this resin through years of sunlight, wind, and rain.
What sets a resin apart, in our view, is its ability to perform with the same reliability, month after month. Our process monitoring system at the plant runs continuous quality checks on each production run. From pellet size distribution to molecular weight ranges, LUPOY PC WSRE0000296 stays inside narrow bands for every key property. Customers experience fewer processing surprises and smoother transitions between production orders, even as global supply chain issues challenge other materials.
Our blending teams dedicate real time and resources confirming that colorants, additives, and regrind integrate smoothly. Consistency means less time spent troubleshooting stuck tools, discolored batches, or surprise flashing in high-speed tools. The resin’s stable rheology brings down the number of uncontrolled variables in any process, which is always a plus for production planners and shift leads.
Many product developments in this plant have started with customer frustration—slow cycle times, splitting edges, unpredictable part strength after shipment. We sit down with molders and fabricators around the region, and most improvements in WSRE0000296’s structure came from listening first-hand. One large-tier component supplier described the satisfaction of running back-to-back orders using this grade to eliminate the musty odor complaints they experienced with regular PC. In another case, a glazing installer called out the reduced stress cracking after thermal swings, a problem that caused service call-backs before they adopted our grade.
Many resin manufacturers rely on lab numbers as a primary value proposition. The difference in our approach with LUPOY Polycarbonate WSRE0000296 comes from day-in, day-out manufacturing experiences. We run up against the same temperature swings, feed inconsistencies, and aging molds as our clients. Out of that hard-earned understanding grows a material solution that blends reliability with performance, rather than sacrificing one for the other.
Real users measure value in fewer headaches during production, parts that perform once shipped, and resin that adapts to tomorrow’s needs as fast as requirements evolve. This grade of polycarbonate was shaped by those priorities. We believe the continued demand for LUPOY WSRE0000296 speaks not only to technical properties, but to the solutions it brings from one shop floor to the next, every single day.