LG Chem, Ltd

Products

LUPOY Polycarbonate (PC) WSRE0000294

    • Product Name: LUPOY Polycarbonate (PC) WSRE0000294
    • Chemical Name (IUPAC): Poly(bisphenol A carbonate)
    • CAS No.: 25037-45-0
    • Chemical Formula: (C₁₆H₁₄O₃)_n
    • Form/Physical State: Pellets
    • Factroy Site:
    • Price Inquiry: sales6@ascent-chem.com
    • Manufacturer: LG Chem, Ltd
    • CONTACT NOW
    VTB
    Specifications
    HS Code 503462
    Product Name LUPOY Polycarbonate (PC) WSRE0000294
    Manufacturer LG Chem
    Material Type Polycarbonate (PC)
    Density 1.20 g/cm³
    Melt Flow Index 6 g/10 min (300°C/1.2kg)
    Tensile Strength 62 MPa
    Flexural Modulus 2350 MPa
    Heat Deflection Temperature 132°C (1.82 MPa)
    Transparency High
    Ul Flammability Rating UL94 V-2
    Water Absorption 0.15% (24hr, 23°C)
    Vicat Softening Point 148°C

    As an accredited LUPOY Polycarbonate (PC) WSRE0000294 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing LUPOY Polycarbonate (PC) WSRE0000294 is typically packaged in 25 kg white polyethylene bags, featuring product labeling and safety information.
    Container Loading (20′ FCL) `Container Loading (20′ FCL)` for LUPOY Polycarbonate (PC) WSRE0000294: 21 metric tons (MT) or approximately 840 bags per 20′ FCL.
    Shipping LUPOY Polycarbonate (PC) WSRE0000294 is shipped in moisture-protective, sealed bags or drums to prevent contamination and degradation. The product should be stored in a cool, dry place away from direct sunlight. Handle with care to avoid physical damage. Shipping complies with international regulations for plastic resins and non-hazardous chemicals.
    Storage LUPOY Polycarbonate (PC) WSRE0000294 should be stored in a cool, dry, and well-ventilated area, away from direct sunlight and sources of heat or ignition. Keep the material in its original, tightly sealed packaging to prevent contamination and moisture absorption. Avoid storage near strong oxidizing agents, acids, or bases. Ensure proper labeling and adherence to all safety data sheet (SDS) recommendations.
    Shelf Life LUPOY Polycarbonate (PC) WSRE0000294 typically has a shelf life of 2 years if stored in original, unopened packaging under recommended conditions.
    Application of LUPOY Polycarbonate (PC) WSRE0000294

    Applications of LUPOY Polycarbonate (PC) WSRE0000294 in Industrial Manufacturing

    LUPOY Polycarbonate (PC) WSRE0000294 supports large-scale manufacturing in sectors where high mechanical strength, transparency, and dimensional stability are indispensable. As the direct manufacturer, we deliver this grade to precise customer formulations across technology-driven industries. Below we outline the primary real-world application routes, each aligned with strict regulatory and production frameworks used by leading downstream producers.

    1. Automotive Lighting Components

    Automakers and tier suppliers rely on this PC grade to produce advanced headlamp lenses, signal covers, and interior LED light guides, where UV resistance and optical clarity are critical for both safety and aesthetics. Integration occurs during injection molding, where controlled melt flow yields precision optical elements for mass vehicle platforms, supporting high-volume, short-cycle manufacturing environments in OEM plants.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    2. Electrical & Electronics Housings

    Electronics OEMs select this polycarbonate for production of device enclosures, switch housings, and power distribution modules requiring dielectric insulation, impact resistance, and flame retardancy. Qualified product runs involve precise control of wall thickness and geometry, enabling downstream surface finishing such as painting, laser etching, and metallization in appliance and consumer electronics factories.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    3. Medical Device Transparent Parts

    Medical and life sciences equipment manufacturers leverage this grade for transparent covers, fluid reservoirs, and diagnostic device windows, where biocompatibility and resistance to autoclave sterilization are required. The material enters ISO 13485-aligned production lines, meeting demands for precise, contamination-free molding of sensitive diagnostic and monitoring systems.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    4. Safety Glazing and Protective Shields

    Construction and safety fixture manufacturers introduce this polycarbonate into glazing units, machine guards, and visors for high-impact resistance and clarity needs. This grade supports both flat and curved profile fabrication in downstream lamination and thermoforming lines as part of advanced architectural or industrial safety system assemblies, underpinned by rigorous tested performance in real-world install environments.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    5. Compact Disc & Optical Media Manufacture

    Data storage and media replication operations rely on this material for precision formation of optical substrates in CDs, DVDs, and Blu-ray discs, where melt flow and particulate purity dictate yield and disc longevity. The production line employs automated injection-compression or co-injection methods, with monitoring for orientation and flatness per sector read performance criteria.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    6. Water Dispenser and Food Contact Bottles

    Beverage and purified water industry producers select this food-contact approved PC grade for robust, reusable water dispenser bottles and kitchenware. Downstream lines require the resin’s high clarity and impact strength to maintain hygienic standards after repeated hot-filling, washing, and mechanical transport cycles, with blow molding and extrusion as common transformation steps.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    Free Quote

    Competitive LUPOY Polycarbonate (PC) WSRE0000294 prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.

    We will respond to you as soon as possible.

    Tel: +8618018036652

    Email: sales6@ascent-chem.com

    Inquiry

    Get Free Quote of LG Chem, Ltd

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    LUPOY Polycarbonate (PC) WSRE0000294: A Manufacturer’s Perspective

    Introduction to LUPOY PC WSRE0000294

    LUPOY Polycarbonate WSRE0000294 sits among the polycarbonates we produce that have drawn much attention within the plastics industry. Through years of refining our compounding process and investing in quality control, we’ve made products like WSRE0000294 that stand out in reliability and consistency. Creating a resin that performs up to real-world demands means working closely with industrial users to learn what actually matters to them: performance under pressure, stable processing, and dependable supply. Over time, we noticed requests were shifting, especially in design and electrical sectors. Most businesses pushing for innovation started asking for clarity, stability, and safety—not just raw performance or price.

    Physical Characteristics and Model Identity

    Every batch of LUPOY PC WSRE0000294 runs through our latest twin-screw extrusion setups, giving the granular resin a uniform structure. This model features transparency and high impact strength, built on a homopolymer polycarbonate backbone with engineered additives blended in to reinforce thermal and UV stability. Our operations team tracks everything from moisture content to melt index in each lot, holding every production run to strict ISO standards.

    Those who need materials for injection molding parts, sheet extrusion, or co-extrusion systems often approach us for this grade due to its processing window. WSRE0000294 holds up through repeated molding cycles without significant degradation, so it fits especially well into demanding manufacturing lines. Our team adjusted the formulation over time, reducing volatiles and optimizing the flow characteristics for both thin-wall and thick-section parts, which helps customers create components without warpage or unpredictable surface finish.

    The Practical Role of WSRE0000294 in Today’s Industries

    Factories making lighting diffusers, safety glazing, and electronics housings need materials that can hold their shape after years in unpredictable climates. WSRE0000294 delivers on clarity and toughness, but its real value appears during assembly and field use. In electric vehicle enclosures, for example, temperature swings often cause lower-cost plastics to shrink, crack, or lose transparency. We engineered our PC resin to fight yellowing and surface cabonization that creeps up through repeated heating and cooling. Customers in the construction supply sector credit this grade with reducing their part failure rates where exposure to UV and weather comes standard.

    Medical device molders report reliable hydrolytic stability after confirming samples through repeated autoclave cycles. Years ago, engineers approached us about creating a batch that stands up to strong disinfectants without weakening bonds or discoloring. Their feedback shaped the additives package in the current WSRE0000294 blend. Unlike general-purpose PC grades, our formula resists crazing from ethanol and peroxides, keeping face shields and machine housings clear through repeated cleanings.

    Understanding Usage on the Manufacturing Floor

    Workshops using LUPOY PC WSRE0000294 often focus on cycle time and waste minimization. Many resins turn sticky or scorch at modest excess temperatures, sending operators scrambling to clear blocked dies and maintain surface gloss. Our team spent years balancing the melt flow index so WSRE0000294 feeds smoothly without “stringing” or gelling prematurely, even at high throughput rates. Molders switching from other polycarbonates often report fewer streaks or unmelted fragments. Most appreciate the way it releases cleanly from the mold, which means less rework and longer tool life.

    Fabricators bending or thermoforming sheets need materials that keep transparency and toughness after reheating. Early resin prototypes made in the 2000s became cloudy with thermal cycling, but we kept iterating until the current version avoided microbubble formation and stress whites even at aggressive forming radii. Our technical team found that the fine-tuned stabilizer package helps maintain gloss and color through secondary operations like laser cutting or ultrasonic welding. In reality, these improvements mean fewer customer complaints about brittle or opaque parts, and they allow the people handling day-to-day fabrication to trust in predictable results.

    How LUPOY WSRE0000294 Emerged from Customer Realities

    We started developing the WSRE0000294 model after years of hearing frustration from engineers and production managers dealing with streaky parts, inconsistent shrink, or poor weathering. Many of them wanted a polycarbonate that blended transparency and mechanical integrity, but real-world requirements vary. Lighting professionals need diffusers that don’t yellow under fluorescent or LED sources. Appliance makers ask about ductility and snap-fit retention after multiple assembly/disassembly cycles. Technicians in cleanrooms want parts that resist fogging, and outdoor electronics casings demand both impact protection and visual appeal.

    Understanding these demands only happens through building trust over time with manufacturers willing to share their headaches and failures. Our approach has always been to test the material beyond its datasheet numbers—running parts through cycles of UV, moisture, tension, stress, and solvent exposure. Field failures guided each improvement in the stabilization system, while feedback from toolmakers and production line supervisors drove us to reduce internal stress for greater dimensional accuracy.

    Material Differences: WSRE0000294 Versus Other PC Grades

    The most common feedback compares WSRE0000294 to both general-purpose polycarbonates and glass-reinforced alternatives. Many PC resins offer a base level of impact resistance or temperature stability, but the way additives interact with polymer chains creates variability in clarity, ductility, and chemical resistance. Our WSRE0000294 version contains a custom-mixed stabilizer blend, which noticeably slows down the rate of optical aging and supports long-term resistance to microcracking under stress.

    Most standard PC grades shine only in basic impact and moldability tests, but start losing gloss or becoming brittle after extended sunlight exposure. Our research and process controls target these points of weakness, ensuring consistent melt flow and reliable clarity after weathering cycles. Many lower-end PC resins use cheaper flame retardants that leave a haze or disrupt smooth surfaces, but our formula achieves standard V-0 ratings while retaining light transmission and optical smoothness—critical for lighting or medical covers. We skip unnecessary fillers that might lower price on paper but end up degrading key performance parameters.

    Glass-filled versions play a different role by offering stiffness and strength at the cost of transparency. Products that demand absolute dimensional stability, like electrical housings or structural brackets, sometimes use those reinforced grades. Yet, WSRE0000294 offers a middle ground for parts that need clarity and moderate reinforcement, allowing product designers to avoid tradeoffs between appearance and mechanical function. That’s one reason appliance and lighting manufacturers gravitate toward it when their designs run up against size, weight, or visual constraints.

    Processing and Quality Control: What Sets WSRE0000294 Apart

    Maintaining consistent lot-to-lot properties comes down to our investment in raw material screening and production-line optimization. Our feedstocks undergo pre-drying and inline filtration to minimize the risk of contamination and moisture, each batch is traceable back through the factory’s automated system. Granulate shapes, particle sizes, and additives loading see regular spot checks from in-house technicians. Resin moisture level sits below the threshold required for clear injection molding, so parts molded with WSRE0000294 resist bubbles, surface swirl, and internal voids.

    Beyond basic control, our team built a batch testing protocol where we run full-scale sample parts under overload to catch rare outliers. If a customer ever runs into processing quirks or unexplained failures, our technical service engineers ask for in-house samples and replicate molding trials using the same mold and setup, troubleshooting every variable from barrel temperature to packing pressure. We track every single complaint and run root-cause analysis to inform incremental improvements, closing the loop on manufacturing quality.

    Contributing to Safety and Compliance Standards

    Over the last decade, safety standards in electrical and electronics manufacturing grew stricter, particularly around flammability and outgassing. Our resin meets key flame and smoke standards, helping customers certify finished goods for sale in regulated markets. Regulatory compliance draws on more than formulations: It includes monitoring for residual monomer, controlling for toxic byproducts, and making sure resins do not release volatile substances above required thresholds during processing or in finished parts.

    Field engineers in automotive, medical, and consumer appliance industries increasingly carry handheld detectors, testing emissions from new parts. LUPOY WSRE0000294 supports low extractables and emissions, a result of both controlled processing and raw material selection. During audits, supplying detailed batch certificates and sharing ongoing compliance data with industrial buyers demonstrates both capability and accountability. We’ve seen how this practical approach encourages long-term relationships beyond mere price quotes.

    Adapting to Sustainability and Circular Economy Pressures

    Our polycarbonate production sits directly in the crosshairs of sustainability discussions. More end-users ask questions about incorporation of post-consumer content, recyclability after end-of-life, and chemical safety in disposal. Developing WSRE0000294 is part of our response to those expectations. With every formulation change, we run lab tests on the use of recycled monomers and secondary feedstocks, working closely with upstream suppliers who demonstrate traceability and quality. The current grade focuses on reducing production waste and supporting closed-loop recycling where possible, aligning with most regional take-back and collection systems used in the plastics industry.

    We help large customers set up regrind or direct reuse programs for off-cut and scrap, tracking resin flow from our plant back to their sites. Being able to offer lifecycle data for every shipment reassures sustainability officers and supports eco-labeling initiatives. The reality for manufacturers is that balancing technical performance with environmental expectations involves constant tradeoffs, and our lab and process teams spend as much time optimizing for reuse as for melt flow or UV stability.

    Supporting Customers in Real-World Manufacturing Setup

    The story behind LUPOY PC WSRE0000294 often comes to life on the factory floor. Plant engineers working tight production schedules can’t afford downtime from nozzle clogging, color drift, or inconsistent shrink. Our process-experienced sales engineers, many of whom have spent years in molding or extrusion themselves, visit customer sites to troubleshoot startups and resolve issues in-line. Setting proper drying parameters, adjusting back pressure, or fine-tuning mold surface finishes all influence the final appearance and performance of molded parts.

    One lighting manufacturer recently invited our team to solve persistent stress fractures in large lenses. After on-site measurements and part analysis, the main culprit was found not in the tool or machine settings but in the compounding technique at their pre-molding line. Working alongside their crew, we modified feedstock storage and preheat routines, leading to steady improvements in impact strength and optical clarity.

    Constructive technical exchange drives our long-term development. Consistent performance isn’t achieved just by chemical recipe—a material must fit into a variety of plant setups, many passed down through generations or retrofitted for new products. Our approach emphasizes practical training, from adjusting drying times to monitoring part ejection temperatures, passing on the technical details that often go overlooked in a pure data sheet.

    Continuous Development Through Field Learning

    Bridging user feedback to lab research propels our ongoing improvements. Each customer return or new challenge—whether a resin running too slow or parts fogging after assembly—informs tweaks to stabilizers, process aids, or even packaging. Several years ago, recurring customer questions about static discharge in automation environments led to an adjusted antistatic blend now used in specialty runs of WSRE0000294. That tweak dropped reject rates across multiple industries handling precision electronics.

    Technicians on our floor stay in regular contact with both product designers and operational leads, developing specialty batches that respond to unanticipated problems. When a batch of specialty greenhouse roofs started delaminating under spring weather, feedback came in directly from agricultural partners. Plant engineers worked through every phase of their production cycle, logging heat profiles, greenhouse installation methods, and environmental exposures. Within a single season, the UV stabilizer ratio updated, reducing future field failures and improving both transparency and toughness.

    Unlike anonymous commodity grades, our PC resin development favors hands-on troubleshooting over mass-market launches. Every field lesson translates back to the production line, feeding into future process controls, QA checks, and additive blends, building a cycle of learning that helps us adapt to industries moving at different speeds.

    Meeting Advanced Needs in Electronics and Automotive Applications

    OEMs in consumer electronics and electric vehicles count on our PC resin to satisfy tight dimensional tolerances while allowing aesthetic flexibility—from frosted blue to crystal clear. The demand for thinner, lighter, and more complex forms tests the boundaries of conventional compounds. Our WSRE0000294 supports tight defect thresholds, no-flow weld lines, and consistent color retention under varying illumination sources.

    One automotive interior supplier moved from a glass-filled competitor grade to our PC because their parts showed better retention of mechanical toughness after dashboard assembly and exposure to cabin heat. Laboratory comparisons highlighted that WSRE0000294 outperformed alternatives by holding impact resistance after thermal cycling, which translated to fewer warranty returns from the automaker.

    Electronics designers requiring intricate, snap-together assemblies find reliable ductility and stress-crack resistance helpful in streamlining their product launches. Unlike stiffer or more brittle alternatives, WSRE0000294 allows deeper flow into microstructured molds, producing fine detail without causing breakage during assembly or end use.

    Emphasizing Health, Compliance, and User Experience

    Healthcare product developers increasingly focus on the patient and user experience, which places pressure on material suppliers to avoid sharp odor, irritation from outgassing, or discoloration from medical cleaning agents. We run our finished resin through a series of chemical extraction and biocompatibility tests to support responsible use in non-implantable applications. Each update to national safety, food contact, or electrical codes prompts a new review, and our regulatory team keeps commercial partners up to date on compliance documentation.

    Outgassing and leachables remain front-of-mind not just for regulatory auditors but for facility staff working with confined, climate-controlled spaces. Material offgassing creates surface deposits on sensitive lenses and sensors; our WSRE0000294 formula minimizes these effects, which reduces part cleaning and replacement cycles downstream. Several device assembly sites use it for protective lenses and sensor housings, citing a noticeable reduction in particle buildup and haze.

    Pushing the Limits of Versatility

    The most innovative manufacturers test our polycarbonate beyond intended use—experimenting with edge-lit panels, anti-tamper seals, personal protective gear, and smart home items. Few PC resins handle both thick-section molding and ultrathin thermoforming, yet our design and process controls make this range possible. This flexibility helps customers reduce resin inventory, simplify supply chains, and adapt product lines to new standards without switching suppliers or requalifying parts.

    Over time, feedback from industrial designers blends into our internal database, contributing to tweaks in colorants, release agents, and anti-drip formulations. Each logged improvement supports broader commercial needs without sacrificing long-term performance or reliability.

    Facing Future Challenges Together

    Manufacturers face pressure to balance cost efficiency with product reliability, safety, and sustainability. LUPOY Polycarbonate WSRE0000294 represents one result of years spent listening to customer challenges, running in-house experiments, and refining both process and product to meet modern demands. Through ongoing field learning and investment in safer, cleaner production technologies, we continue building materials that can stand up to evolving needs in lighting, medical technology, appliances, transportation, and beyond.

    As the industry keeps changing—driven by both tighter regulation and smarter product design—we stay committed to working with customers, engineers, and field technicians to identify what matters most in polycarbonate performance, always seeking practical improvements that will help real-world businesses produce safer, more durable, and more sustainable products.