| HS Code | 792957 |
| Product Name | LUPOY Polycarbonate (PC) TE5000G |
| Manufacturer | LG Chem |
| Material Type | Polycarbonate |
| Form | Granules |
| Color | Natural |
| Melt Flow Index | 10 g/10min (300°C/1.2kg) |
| Density | 1.19 g/cm³ |
| Tensile Strength | 63 MPa |
| Flexural Strength | 93 MPa |
| Flexural Modulus | 2400 MPa |
| Impact Strength Izod Notched | 60 kJ/m² |
| Heat Deflection Temperature | 130°C (at 1.8 MPa) |
| Vicat Softening Temperature | 148°C |
| Flame Rating | UL94 V-2 |
As an accredited LUPOY Polycarbonate (PC) TE5000G factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | LUPOY Polycarbonate (PC) TE5000G is typically packaged in 25 kg multi-layered, moisture-resistant bags with clear product labeling. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL) for LUPOY Polycarbonate (PC) TE5000G: Approximately 16 metric tons packed in standard 25kg bags, palletized. |
| Shipping | **Shipping Description:** LUPOY Polycarbonate (PC) TE5000G is shipped in sealed, moisture-resistant 25 kg bags or bulk containers to prevent contamination. Store and transport in cool, dry conditions, away from direct sunlight and heat sources. Ensure packaging remains intact during transit to maintain product quality and safety. Not classified as hazardous for shipping. |
| Storage | LUPOY Polycarbonate (PC) TE5000G should be stored in a cool, dry, well-ventilated area, away from direct sunlight and sources of heat or ignition. Keep the material in its original, tightly sealed packaging to avoid contamination and moisture absorption. Store at temperatures below 30°C, and avoid stacking heavy items on top to prevent deformation of the packaging. |
| Shelf Life | LUPOY Polycarbonate (PC) TE5000G typically has an unlimited shelf life if stored properly in cool, dry conditions away from sunlight. |
LUPOY Polycarbonate (PC) TE5000G serves as a high-performance engineering resin across multiple industrial sectors. As the direct producer, we have standardized our technical grades and material customizations according to the diverse requirements of specialized manufacturing streams. Below, we detail real downstream industrial application cases, reflecting compliance, use levels, process flow, and product categories.
Automotive OEMs specify TE5000G grades for injection-molded lenses and housings in headlamps, tail lamps, signal lamps, and daytime running light modules. Its high light transmittance, UV resistance, and thermal dimensional stability suit advanced LED and HID systems. As the direct manufacturer, we cooperate with Tier 1 suppliers to ensure the raw material exceeds critical functional, aging, and aesthetic benchmarks for exterior auto lighting. Strict traceability, zero foreign particles, and tailored impact modification meet regulatory and durability test cycles imposed by global automakers.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Electronics manufacturers use TE5000G for switchgear housings, power distribution boxes, and terminal block covers, supporting high dielectric strength, flame retardancy, and form stability. We support customers in precise molding of thin-walled, snap-fit enclosures that must pass insulation and glow-wire testing. Material tracking, batch uniformity, and halogen-free grades ensure compliance with international regulatory regimes for electrical safety and environmental limits on hazardous substances.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Medical device OEMs select TE5000G for rigid enclosures and transparent access panels in powered diagnostic and imaging equipment. The pure and low-leachable polymer structure supports biocompatibility and internal sterilization protocols. As the manufacturer, we implement GMP-level batch control and full traceability, delivering only resin batches with validated cytotoxicity and chemical resistance for direct clinical device fabrication.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Manufacturers of residential and industrial water purification systems incorporate TE5000G in pressure vessel end caps, flow meter windows, and fluidic control bodies. The resin's chemical inertness and clarity comply with potable water system component requirements. We deliver material variants specifically qualified for drinking water contact, ensuring tight molecular weight control, low residual monomer content, and regulatory documentation for water exposure applications.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
TE5000G provides the high optical clarity and flow properties for continuous disc processing lines manufacturing audio CDs, DVDs, and archival data storage media. The material's consistent melt flow and extremely low total volatile content enable precise replication of digital microstructures, critical for signal integrity and minimized read errors. Our process controls ensure the resin batches meet the ISO disc substrate standards and cleanroom manufacturing protocols for defect-free production in the optical media sector.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Building materials producers adopt TE5000G for impact-resistant panels and window assemblies in architectural, security, and industrial installations. The raw material delivers consistent thickness control, mar resistance, and meets global building fire and safety glazing codes. We customize melt viscosity and stress resistance to facilitate lamination with anti-abrasion or toughening films, critical to certified applications in high-traffic public and transportation infrastructure projects.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive LUPOY Polycarbonate (PC) TE5000G prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8618018036652
Email: sales6@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
We have worked with polycarbonate for decades, molding it, observing it under heat and pressure, pushing its boundaries in our machines. Every new model carries lessons from the previous generation, and we can see shifts in industry demand with each improvement. LUPOY Polycarbonate TE5000G represents one of those steps forward that comes from listening closely to what fabricators, OEMs, and end-users actually need—real-world toughness, process consistency, and safety in demanding technical environments.
TE5000G’s standout trait lies in its robust impact resistance. Right on our line, we see it in the mold and during drop tests: parts handle rougher handling than typical PC grades. You get a material built to shrug off sudden shocks, whether it’s a jolt in transport or a dropped enclosure during installation. This durability gives design engineers more confidence to reduce wall thickness, which lowers part weight and material usage without risking brittle failures.
Another difference shows up during processing. With TE5000G, melt flow stays stable batch after batch. Even when changes in temperature or humidity creep into the plant, the resin moves smoothly through hot runner systems. There’s less shearing and fewer color streaks, which improves yields. We spot fewer shutdowns for nozzle cleaning, and operators spend less time tweaking cycle parameters.
TE5000G doesn’t only make fabrication easier. It creates finished parts with clean surfaces. When we injection mold covers or housings, the gloss appears even, with little evidence of flow lines. This helps when customers want front panels or medical device parts to look professional straight from the press.
Working closely with partners in electrical and electronics production, we’ve put TE5000G through its paces. Applications typically include circuit breaker casings, distribution panels, and control housings that have to meet demanding safety standards. Electricians and assembly workers handle these enclosures every day. Polycarbonate in these roles can’t go brittle. It needs to resist cracking when fixings bite down or when panels open and close repeatedly.
TE5000G stands up to high-voltage insulation needs. We run regular dielectric strength and tracking-resistance tests, and results remain consistent with the highest polycarbonate standards. Unlike some commodity PC resins, TE5000G resists arc-tracking, so it’s better suited to crowded or humid electrical boxes. This keeps the risk of short circuits low and meets industry certifications for flame retardance without loading in extra additives that might compromise flow.
We’ve also seen the material used in lighting diffusers and safety shields. The clarity levels in TE5000G don’t match optical grades, but for robust translucent covers, the impact resistance really makes a difference. We’ve heard from clients who switched from brittle plastics, only to see damage rates from shipping and field use drop sharply. Less waste on the production floor, fewer replacements, and lower customer complaints—it’s all tangible benefit.
We see real differences on the shop floor. TE5000G flows well at standard injection pressures. This gives us cleaner mold fills and supports more complex tool geometries. Thin-wall sections are easier to fill out, avoiding short shots, so there’s less regrind and less need for post-mold repair.
During extrusion, TE5000G holds its viscosity profile even in continuous runs. Sheet producers have reported fewer surface defects, and scrap rates stay low. It extrudes into sheets and simple profiles without gelling or surging, which has shortened setup times during line changes.
From a process safety point of view, TE5000G gives off very little volatile material compared to some alternative resins. Tooling buildup is slower. We’ve had fewer cases of vent clogging or plate-out on mirror-finish surfaces. Molding in-house and at customer plants, we keep air quality well within occupational health benchmarks.
There’s no shortage of polycarbonate resin options. We run parallel batches for comparison: general-purpose PC, high-flow PC, base PC blends with fillers or flame retardants. One difference that stands out with TE5000G is its balance of toughness and processability. High-flow grades process readily, but sometimes their impact resistance drops off sharply, especially at colder temperatures. Our own data, plus customer field returns, show TE5000G holding up against both drop impacts and sustained stress better than most high-flow competitors.
We’re often asked about long-term UV stability and heat aging. TE5000G is not a specialty UV grade, but in covered installations or indoor panels, it doesn’t yellow or degrade as fast as low-cost polycarbonate. In accelerated oven aging, molded test bars retain their flexibility longer, showing less embrittlement. For outdoor clear glazing or overexposed components, adding a surface UV coating remains a best practice, but the base polymer of TE5000G gives a strong platform.
Compared to polycarbonate blends—like PC/ABS or PC/PMMA—the pure resin of TE5000G wins points for purity and predictability. Some blends offer better chemical resistance or lower cost, but the all-PC construction means mechanical strength and electrical properties stay reliable through tough cycles of assembly, use, and maintenance. The resin holds up after drilling, tapping, and repeated fastening, which keeps parts securely together without spider cracks radiating from holes.
Customers in the electrical, transportation, and healthcare markets press us for detailed compliance data. TE5000G’s flame retardant performance is a direct result of its molecular structure, not heavy use of brominated additives. Standard tests show that it achieves V-2 or better flame rating in many wall thicknesses—often enough for housing, terminal blocks, and switchgear.
We also invest in traceability and batch consistency. Each lot can be traced back through our raw material inputs. Customers that need regular supply for high-volume assembly lines appreciate consistency, because process parameters aren’t constantly shifting. Inline spectroscopic checks help us catch minor variations in melt viscosity or color before resin leaves the plant.
RoHS compliance matters for electronics producers, and TE5000G meets these standards. Additive packages used in the compound avoid restricted heavy metals and regulated substances under most legislation covering global markets. We supply certificates on request, since many finished products face scrutiny at export or at customs.
TE5000G rarely ends its journey as raw resin. The real ingenuity comes from how customers shape and finish it into next-generation devices. Some use laser marking for serial codes and part identification. Others run secondary machining—milling, drilling, ultrasonic welding—without the kind of chipping or dusting that plagues more brittle thermoplastics. Medical device makers report that parts molded from TE5000G can take cleaning with hospital disinfectants or mild solvents day after day without significant surface dulling or micro-cracking.
Sustainability weighs on everyone in manufacturing, including us. TE5000G supports recycling at the end of its lifecycle. Scrap generated in-house often reprocesses cleanly, so closed-loop systems become feasible in industrial settings. Finished parts do not contain intentionally added halogens or SVHCs under REACH. When waste handling streams call for separation, the resin’s density and burn characteristics make identification and sorting easier compared to multi-phase or heavily filled blends.
Feedback loops make for better products, and we take the time to listen. Moldmakers from high-volume production have called TE5000G forgiving—meaning fewer headaches getting it to fill fine details or eject complex parts. Maintenance techs prefer it, since there’s less abrasive wear on expensive tooling compared to some glass-filled compounds.
Engineers designing parts for handheld instruments or machine guards have highlighted how TE5000G shrugs off tough impacts yet keeps a comfortable feel. The resin’s inherent toughness lets them move away from metal reinforcements or costlier engineering plastics. Several teams have shifted from PC/ABS for the added strength and cleaner finish, even though they could have chosen a marginally lower-cost blend.
On the supply chain side, consistency matters. Our sales and logistics staff report that customers needing volume shipments can count on our production facility to scale output up or down without wide swings in quality. TE5000G’s pellet form blends with most standard masterbatches, so color matching to corporate branding or new product launches runs smoothly.
There’s still room to push polycarbonate properties further. We’re running trials incorporating more post-consumer resin content. Early results show that TE5000G’s melt stability and color tolerance support moderate levels of recycled content while minimizing sacrifice in performance. Some customers want to close the loop by returning sprues and scrap for reprocessing. Our process engineers work with their teams to set up sampling protocols and line trials, because we see sustainability as a shared project.
Some sectors need even higher flame ratings or resistance to harsh chemicals. For these cases, we collaborate on custom compounding: blending in specialty flame retardants, anti-static additives, or tailored impact modifiers. Unlike with some multi-component blends, TE5000G’s base polymer makes it a better “blank slate” for specialty modifications while keeping core strength intact.
Transparency in raw material sourcing is a growing concern. Our procurement staff focuses on stable, vetted suppliers who certify resin composition and trace possible conflict minerals. This supports our own product integrity but also provides our downstream customers with the confidence that TE5000G resin supports responsible supply chain management.
Being a chemical manufacturer means standing behind the resin. We take accountability for every bag or truckload that goes out. If a customer lines up a new mold for an enclosure assembly, our application engineers step in and support them through mold trials and optimize process parameters. This feedback matters, since it pushes us to address pain points like flow hesitation or weld line strength on the plant floor—well before a user in the field ever experiences an issue.
We maintain a technical service hotline staffed by people who have actually run the machinery, not just a customer support script. When processors run into issues with gating, venting, appearance, or stress whitening, our techs dig in and suggest actual tooling or parameter changes, not just send boilerplate advice. This two-way conversation built up over dozens of customer projects lets us keep improving the resin and avoid quality drift.
Factories operate best with predictability. TE5000G delivers a steady melt profile time after time, so once our customers lock in their mold setups, they can keep running with confidence. Material consistency keeps molded part dimensions on target and helps avoid cumulative tolerance stack-up in downstream operations.
Process engineers who rely on TE5000G don’t find themselves halting lines unexpectedly due to inconsistent batch quality. That reliability allows for finer tuning, optimizing cycle times, and deploying more automation. It also keeps suppliers’ and customers’ relationships positive and geared toward shared growth rather than blame-shifting or safety stock buildups.
TE5000G is part of a bigger effort to serve customers with reliable, reproducible, and safe plastic materials. Our focus extends beyond simple product specs—we back it up with process insight, supply reliability, and open communication about resin performance and limitations. We work hand-in-hand with customers at their production sites to address challenges as they crop up: pushing for faster cycle times, sharper detail, or lower scrap rates.
No two projects look the same, which is why we stay involved from first-contact resin trials through high-volume production. Where traditional PC materials lose strength or appearance with repeated cycles, TE5000G keeps its edge in clarity, toughness, and process stability. Whether it lands in an electrical enclosure, a protective cover, or a critical machine housing, it offers a material backbone that supports both innovation and everyday reliability.
Customers can expect TE5000G to solve more than just simple material needs—from making manufacturing smoother and safer to supporting environmental goals through reusability and recycling. The knowledge built into TE5000G’s resin structure comes directly from our years on the factory floor, continually working with real-world requirements, not just lab-bench hypotheticals.