| HS Code | 162912 |
| Product Name | LUPOY Polycarbonate (PC) PC1201 |
| Manufacturer | LG Chem |
| Material Type | Polycarbonate (PC) |
| Melt Flow Index | 12 g/10 min (at 300°C/1.2kg) |
| Density | 1.20 g/cm³ |
| Tensile Strength | 63 MPa |
| Flexural Modulus | 2300 MPa |
| Impact Strength Izod Notched | 65 J/m |
| Heat Deflection Temperature | 135°C (at 0.45 MPa) |
| Transmittance | 88 % |
| Vicat Softening Point | 147°C |
| Molding Temperature | 260-320°C |
As an accredited LUPOY Polycarbonate (PC) PC1201 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | LUPOY Polycarbonate (PC) PC1201 is packaged in 25 kg white polyethylene bags labeled with product details, manufacturer, and safety information. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL) for LUPOY Polycarbonate (PC) PC1201: typically 25 MT per 20-foot container with standard pallet packing. |
| Shipping | LUPOY Polycarbonate (PC) PC1201 is shipped in moisture-proof, sealed bags or containers to prevent contamination and degradation. Packaging typically ranges from 25 kg bags to larger bulk containers. During transit, the product should be kept dry and protected from direct sunlight, heat, and physical damage to maintain quality. |
| Storage | LUPOY Polycarbonate (PC) PC1201 should be stored in its original, tightly sealed packaging in a cool, dry, and well-ventilated area. Protect it from moisture, direct sunlight, and sources of heat or ignition. Avoid storing near strong acids, bases, or oxidizing agents. Ensure the storage area is clean and free from dust to maintain product quality and performance. |
| Shelf Life | LUPOY Polycarbonate (PC) PC1201 typically has an unlimited shelf life when stored indoors, dry, and in original, unopened packaging. |
As a controlled manufacturer of LUPOY Polycarbonate PC1201, we engage directly with processors in the fields of electronics, automotive, optical media, construction materials, medical equipment, and packaging. LUPOY PC1201’s high thermal stability, dimensional precision, and impact tolerance provide secure material supply for diverse, performance-driven downstream sectors. The following application scenarios detail actual manufacturing integrations, regulatory frameworks, compounding ratios, and typical end-use products.
Automotive Tier 1 suppliers compound PC1201 in reflector housings, headlamp lenses, and rear lighting covers to deliver transparent, heat-resistant parts. Downstream manufacturing lines rely on high-flow grades for precision injection molds, creating parts that maintain light transmission and dimensional integrity under sustained vibration and temperature cycles. PC1201 provides the clarity, UV durability, and mechanical strength crucial for compliance in headlamp and signal lamp modules, enabling high-yield production with automated demolding cycles and minimal finishing.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
PC1201 supports the manufacture of molded enclosures for consumer and industrial electronics, including control device housings and power distribution casings. Downstream processors benefit from the material’s flammability resistance and dielectric properties, allowing compliance with international electrical safety protocols. The polymer maintains structural integrity during thermoplastic assembly and resists shrinkage in ultrasonic welding, snap-fit design, and in-mold decoration with complex internal geometries.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Disc manufacturers require PC1201 for its high molecular uniformity and low birefringence. Injection-molded optical discs must meet precise optical path and resistance to warping under thermal cycling. PC1201 allows downstream processors to achieve stable pits and grooves during quick-cooling disc molding cycles, supporting CD, DVD, and Blu-ray disc production that passes demanding visibility and data integrity testing.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Medical OEMs select PC1201 for diagnostic and analytical instrument outshells due to its biocompatibility, dimensional reliability, and ease of post-mold sterilization. PC1201 resists repeated exposure to disinfectants, while precise molding tolerances support the fitment of panels and mechanical subassemblies in medical analyzers. Each production lot ships with traceability records for downstream validation audits, supporting global device regulatory submissions.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Food-contact packaging processors use PC1201 to manufacture refillable water bottles, dispensing bottles, and rigid packaging containers where repeated washing cycles and hydrolytic stability are critical. Production requires certified food safety records and careful compounding to avoid leachable substances. Downstream converters rely on PC1201 to form smooth, scratch-resistant surfaces through blow molding or injection stretch blow molding processes, maintaining clarity and break resistance throughout the product’s lifecycle.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Building materials manufacturers process PC1201 into multiwall and solid sheets for use in transparent architectural panels, skylights, and machine guards. Material properties support sheet extrusion with low stress whitening, providing impact and weather resistance. Particularly in public building applications, PC1201 meets building code demands for transparency, load bearing, and fire resistance, while age-resistant grades withstand UV for extended outdoor service life.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive LUPOY Polycarbonate (PC) PC1201 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8618018036652
Email: sales6@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Manufacturing polycarbonate is no weekend project. Years at our plant dealing with the ebb and flow of market demand and continuous production improvements have shaped how we develop and refine products like LUPOY PC1201. Every resin batch tells a story, from polycondensation stages to the exacting granulation lines, revealing meticulous work in managing temps, feed ratios, and conversion rates. There’s no “one size fits all” on our production floor: PC1201 goes through careful dosing and monitoring, not only to hit the regular mechanical strengths but to deliver consistent thermal stability, optical clarity, and processing efficiency. Walk through our compounding room on any given shift and you’ll find teams inspecting melted streams for flow consistency or testing for melt index—never treating the material as just another anonymous resin.
LUPOY PC1201 doesn’t boast the highest molecular weight in our range or claim wild numbers on data sheets. The value comes in reliability over thousands of production cycles—manufacturers who mold headlamp housings, electrical casings, or household device shells want product that neither warps in seconds nor cracks in weeks. PC1201 checks those boxes. This model maintains stable viscosity even under extended injection runs or extrusion. That means fewer hang-ups in the hot runner, cleaner part surfaces, and none of the haze that plagues lower-tier blends once you crank up the throughput. We know the difference because our own test rooms have pitted this grade against high-modulus variants and flame-retarded types in everything from ultraviolet chambers to repeated drop-and-shock cycles.
Ask the foreman at a busy molding facility why certain grades move year after year: it has less to do with glossy brochures and more with the simple consistency that cuts downtime and surprises. LUPOY PC1201 arrives ready for low-defect, high-output jobs. Its melt flow sits at a level that matches a broad range of standard injection machines. Process windows widen, mold wear goes down, and regrind content can be adjusted without sudden changes in impact resistance or transparency. These points matter—when you have ten presses running and one starts stringing parts because of a resin blend’s quirks, it costs hours, not minutes.
No secret sauce replaces attentive sourcing and storage. We take real-world steps, starting at the raw monomer supplier. Each incoming lot is tracked from barge receipt through the polymerization tanks, with test runs at critical heat and shear levels. Our teams know every tank’s quirks, and minor shifts in moisture or catalyst performance never slide past unchecked. We’ve invested in closed-loop drying and real-time spectral analysis to catch impurities before they leave the line—avoiding the all-too-common “black spec” or off-gas problems that tend to show themselves only after a customer has a truckload at their door.
The market is saturated with PC grades, but many buy only on price, ignoring these basic controls. Every time a client calls about competitor resin leading to outgassing or yellowing mid-way through a project, it’s a reminder: control from base feedstock to finished pellet isn’t optional—it is the job.
Many see the term “transparent polycarbonate” and assume it’s all about high optical transmission. That’s not the whole story. In our shop, transparency represents predictability. PC1201 doesn’t just look clean in finished form, although it does; it keeps optical distortions down at part thicknesses from under one millimeter up to several. Screen covers, panels, even automotive clusters tested under actual traffic glare still resist yellowing or clarity fade after months of weathering. The work comes from years of dialing in the right balance of residual monomer and branching structure, not simply filtering the final melt. Process engineers with eye for detail choose PC1201 for this reason—they don’t want callbacks for discolored or brittle goods months down the line.
The learning curve never truly flattens in polycarbonate processing. Every extruder or press setup demands careful handling, and even small inconsistencies in feed moisture or compounding conditions show quickly. LUPOY PC1201 answers back with a predictable melt flow and good thermal endurance, so crews can push for higher throughput without fighting splay or gas evolution. Our own experience calibrating screw speeds or hot runner profiles has shown this grade can take moderate regrind without stiffening or dulling—a relief on lines where waste reduction matters.
Newer batches have shown even tighter spec control, thanks to investment in process analytics: near-IR moisture probes and melt index sensors adjust dosing in real-time, delivering pellet lots that mold the same today as they did six months ago. For toolmakers and plant managers, this makes future planning and troubleshooting a far less stressful job.
Every worker on our production floor knows the material’s reputation rests on actual product reliability. PC1201 holds up to repeated impact, resisting shattering better than grades with boosted flow or reduced cost bases. In-house tests drop, bend, and flex finished products across seasons, subjecting molded panels to blunt force, sharp edges—even chemical exposure from common degreasers.
The numbers—a notched Izod impact rating, Vicat softening point, or heat deflection temperatures—mean less to most end users than the lived experience. Insulation panels made with PC1201 keep their shape under load. Safety visors resist cracking when tossed. In the field, power tool housings and electronics enclosures stay in service far longer with this compound than more brittle or recycled-filled alternatives. We track returns and field feedback closely; persistent use in demanding sectors like automotive and consumer electronics backs up what the test sheets show here in the lab.
Our comparison pool includes dozens of PC formulations—flame retardant, glass-filled, high-flow, or biodegradable. PC1201 stands apart with its balanced property profile. Some polycarbonate grades come loaded with additives, and labs often chase flame or UV performance at the cost of clarity or ductility. PC1201 plants its flag in clean, undoped toughness and clarity. We see this in customer feedback; those who try filled or blended grades may see early wins in stiffness or self-extinguishing benchmarks but lose out on transparency or find difficulty in reprocessing.
This is a general-purpose grade, but not a generic commodity resin. Molders trust PC1201 because it stays stable across cycles and supports short runs and long campaign production. Premium engineering blends cost far more but rarely outperform PC1201 in real day-to-day products where balanced impact and clarity matter more than extreme specialty metrics. In multi-cavity tool shops, where downtime’s measured in payroll and missed shipments, the switch from a specialty grade back to PC1201 is often a return to predictability.
Like any responsible manufacturer, we’re not standing still. Pelletizing lines and compounding facilities keep evolving. Recent upgrades push for cleaner production—closed-loop water cooling, low-waste extrusion, solvent recovery from the few steps that use cleaning agents. Staff on our energy audit teams care about every kilowatt spent, knowing continuous production means both margins and responsibility stack up across the year. LUPOY PC1201 benefits from these changes; fewer process perturbations mean tighter lot-to-lot range and fewer waste bins at shift end.
There’s another layer now: working toward sustainable sourcing. Recycled content remains a challenging path for optical grades like PC1201. We trial batches with post-consumer and post-industrial inputs, carefully monitoring for haze, loss of impact, or melt inconsistencies. Progress continues, and even with all obstacles, growing numbers of our product lots now include traceable recycled streams, closely managed to avoid quality dips. Clients increasingly ask about lifecycle impacts, and only those truly close to the resins—from batch mixers to technical support—properly understand the balance between recycled content, emissions, and uncompromised properties.
Anyone looking at the resin market knows challenges come from many directions: raw material price spikes, transportation shortages, regulatory mandates on chemical safety and compliance. We deal with them daily. Sourcing bisphenol A consistently means anticipating supplier disruptions and bringing in new certification protocols for every new integration point.
Compliance with global regulations—RoHS, REACH, and more—takes teams of dedicated staff on documentation, batch sampling, and x-ray fluorescence screens to confirm absence of heavy metals or unwanted additives. Our customers, especially those exporting finished goods worldwide, depend on our tracked compliance records. PC1201 doesn’t contain added flame retardants or hazardous fillers, making declaration and audit work less painful for assembly houses or importers.
Market newcomers sometimes see commodity PC and underestimate the value of traceability and batch consistency—until a recall or batch failure forces a tough lesson. Years of feedback and long-term supply relationships show time and again that reliability at the pellet level, not just in the brochure, wins loyalty. Our crew knows this every time emergency orders roll in from customers burned by short-notice disruptions elsewhere.
A resin is not just a raw material—success depends on sharing deep process knowledge. Plant engineers who’ve spent years debugging extruders or injection presses know the signs: popping and splay, surface irregularities, or unseen internal voids. We maintain dedicated field teams, technical experts who have run lines themselves, not just offered cuts from a catalog. These folks routinely walk plant floors, troubleshoot in real time, and suggest actionable tweaks—be it drying regimes, backpressure settings, or mold venting adjustments—to get the absolute best out of PC1201.
We field hundreds of calls monthly from new users and longtime partners facing changing specs or production goals. Advice comes rooted in the day-to-day reality of handling, drying, and compounding—not in guesswork. This includes optimizing screw geometry for challenging fill ratios, running comparative tests on cycle times, or finding blends that maximize value from offcuts.
Our resin engineers see more applications cropping up every quarter. In architectural lighting, clarity plus toughness make PC1201 a default choice for diffuser panels that withstand rough handling at site installation—better even than glass in many rapid-build scenarios. In food contact articles, the inert and pure backbone of the PC grade satisfies global ordinance without the need for post-blending stabilizers. Medical device firms, operating under stringent change-control rules, use PC1201 for housings and clear covers because its formulation stability simplifies regulatory re-approvals.
Electronic manufacturers use this grade for safety shields and circuit board security panels that insist on clarity but also face knocks and surges from shopfloor carts or errant tools. Automotive interior and lighting groups favor PC1201 because it endures typical UV profiles without showing premature haze or embrittlement, avoiding expensive warranty replacements. Our experience links real-world production runs to product lifecycles—showing where and how LUPOY PC1201 consistently meets not just presented needs, but those unanticipated edge-case challenges.
Durability claims gain value only with time and use in the field. We have followed products made with PC1201 through years of end-use, tracking factors such as color shift, dimensional stability, screw retention in assemblies, and long-term surface finish retention. It is easy to point to fresh-off-the-press results; the real test comes after years in outdoor kiosks, handheld tool enclosures, or constant on-off cycling in appliances.
Warranty returns and customer feedback loops constantly inform formulation tweaks and processing guidelines. In many observed cases, housings made with this grade outlast those formed from higher-stiffness but less robust grades, resisting UV-driven embrittlement or environmental stress cracking better. Tooling wear after thousands of cycles remains low, and surface contamination (so common with lower-grade resins from recycled sources) stays minimal. These findings reflect direct plant experience and ongoing partnerships with high-volume OEMs.
Production managers and operators often learn the hard way where a resin choice can spell trouble. We invest as much in preventive testing and troubleshooting as we do in new compound development. Drying procedures remain crucial—polycarbonate absorbs moisture from the air, which leads to splay and weakened parts. Our teams have spent months refining hopper dryers and setting protocols for incoming plant humidity corrections.
Using PC1201, mix regrinds with virgin stock at recommended intervals: our trial data shows impact resistance and clarity hold, provided thermal history stays within limits. Crew supervisors track startup procedures and purge schedules, logging runs against part aesthetics and mechanical benchmarks, preventing avoidable part failures later. On lines running high-cavity toolsets, our support staff frequent molding bays to monitor subtle shifts: tool wear, changes in gate design, or runner cooling. They know the warning signs and act before problems multiply.
Every shift in our factory reminds us that the best polycarbonate resin doesn’t just live on paper. LUPOY PC1201 fits hundreds of jobs every day because it has been lived with, refined, and tested across thousands of tons and millions of finished goods. The "right" product never comes from just matching a specification sheet—it comes through years of production, learning in the field, navigating slip-ups, and staying aware of customer needs that change with each season.
LUPOY PC1201 brings together the things that matter: consistent transparency, real impact strength, thermal stability, ease of reprocessing, and compliance with demanding regulations. The resin’s balance means tool shops and assembly lines ask for it by name. It stands apart in a crowded market, not because of some secret formula, but because of real-world experience and commitment to quality—lessons earned batch by batch, order by order, over every year we’ve worked with our customers.