| HS Code | 224660 |
| Product Name | LUPOY Polycarbonate (PC) K1622P |
| Manufacturer | LG Chem |
| Material Type | Polycarbonate |
| Grade | K1622P |
| Melt Flow Index | 22 g/10 min (300°C/1.2kg) |
| Density | 1.20 g/cm³ |
| Tensile Strength | 62 MPa |
| Flexural Modulus | 2400 MPa |
| Heat Deflection Temperature | 126°C (0.45 MPa) |
| Vicat Softening Point | 146°C |
| Mold Shrinkage | 0.5-0.7% |
| Transparency | High |
| Flammability Rating | UL94 V-2 (1.5 mm) |
As an accredited LUPOY Polycarbonate (PC) K1622P factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | LUPOY Polycarbonate (PC) K1622P is packaged in a 25 kg white plastic bag, labeled with product details and batch information. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL) for LUPOY Polycarbonate (PC) K1622P: typically 16-20 metric tons packed in 25kg bags on pallets. |
| Shipping | LUPOY Polycarbonate (PC) K1622P is typically shipped in 25 kg polyethylene-lined paper bags or bulk containers to ensure product integrity. The shipment should be stored in a cool, dry place away from direct sunlight and protected from moisture. Proper labeling and handling in compliance with safety regulations are essential during transport. |
| Storage | LUPOY Polycarbonate (PC) K1622P should be stored in a cool, dry, and well-ventilated area, away from direct sunlight and sources of heat or ignition. Keep the material in tightly closed, original containers to prevent moisture absorption and contamination. Avoid exposure to outdoor elements and store separately from strong acids, bases, and oxidizing agents to ensure product integrity and safety. |
| Shelf Life | LUPOY Polycarbonate (PC) K1622P typically has a shelf life of 2 years when stored in unopened, dry, and cool conditions. |
LUPOY Polycarbonate K1622P is produced for demanding industrial segments that require enhanced clarity, high-impact strength, and lasting dimensional stability. Our plant supplies this resin to manufacturers who specify precise polymer grades for complex downstream processes and target strict regulatory frameworks worldwide.
Automotive OEMs use this polycarbonate in mass-production of parts where UV resistance, gloss, and mechanical integrity must remain stable under frequent thermal cycling. Typical applications include instrument panel clusters, climate control housings, and interior trim bezels. Injection molding lines dose the resin directly, with grade-specific colorant masterbatches added for OEM-matched finishes. Downstream customers require low VOC release and high surface quality, especially for visible components positioned near passenger airways.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Ask for polycarbonate K1622P in electronics housing applications where impact failure or dimensional deviation could threaten safety or function. Downstream electrical OEMs depend on this grade for molding low-wall enclosures and connector blocks, especially where transparent or translucent covers must allow inspection or indicator visibility. Clean-room extrusion and insert-molding lines run this grade for repeatable part dimensions and stable flame-retardant response without halogen additives.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Process control in advanced lighting factories requires polycarbonate grades that remain clear after UV exposure and offer uniform diffusion for LED applications. Producers select K1622P for optical quality, clarity, and weatherability in extruded diffusers, lenses, and lamp covers. This resin withstands continuous lighting operation, resists discoloration when exposed to sustained light, and maintains consistent thickness profile during high-volume extrusion. Formulators match refractive index and melt flow with masterbatch pigment and UV stabilizer pre-mixes.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Medical device manufacturers specify this polycarbonate grade for diagnostic housing and sterile components where chemical resistance, non-cytotoxicity, and clarity are mandatory. Healthcare clients run K1622P on validated molding cells for quick release of hand-held devices, sample holders, and laboratory analyzer covers. Procedures enforce rigorous batch traceability and downstream gamma sterilization compatibility for final products destined for regulated market regions.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Industrial OEMs select this grade for machine perimeter guards, operator windows, and process protection screens where impact tolerance and visual clarity are mandatory for safety and line-of-sight monitoring. Polycarbonate K1622P supports both cold and hot bending to custom profiles, and downstream users rely on stress-crack resistance and thermal stability for integration into automated machine housing. Units must achieve global safety label approval and withstand repeated cleaning protocols in process environments.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Manufacturers of personal protective equipment demand high-grade polycarbonate for transparent face shields and visors, specifying optical purity, chemical resistance, and dimensional accuracy. K1622P feeds continuous process lines producing injection-molded and thermoformed visors for healthcare, laboratory, and industrial use. The material supports rapid demolding, reliable impact stopping ability, and subsequent surface hard-coating for repeated cleaning, all while passing strict optical testing.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive LUPOY Polycarbonate (PC) K1622P prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8618018036652
Email: sales6@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Our work on polycarbonate resins goes back decades, and LUPOY K1622P stands out as one of the most consistent performers in our production line. We understand what it means to trust your raw materials, especially in high-precision applications like electronics housings, automotive glazing, and mechanical components. Engineers have requested a grade strong enough to handle sudden impact, clear enough for light-diffusing parts, and stable under challenging thermal loads. Every pellet of K1622P leaves our reactors meeting these expectations.
We manufacture K1622P for projects requiring real-world safety and long-term stability. This resin features a well-balanced melt flow (MFR), providing a level of processability that suits both thin-wall injection and thicker moldings. From our side, we carefully regulate polymer chain length, controlling viscosity through tight reactor parameters, not just recipe tweaks. Thermal resistance comes from the raw Bisphenol-A feedstock quality and well-controlled extrusion, resulting in Vicat softening readings suited for demanding enclosures or automotive light guides. Our staff tests every batch for clarity, transparency, and yellowness index. Engineers looking to avoid haze or unwanted tinting in clear parts usually settle on K1622P within a short series of mold trials.
We chose the K1622P grade when customer feedback pointed toward greater reliability for parts that undergo constant stress and repeated sterilization. Medical device makers commented on lower warpage and retained mechanical strength compared with some other PC resins. In automotive lighting, it delivers steady optical performance—the complex shapes mold accurately without bubbles or streaks. In consumer electronics, the high impact strength gives designers creative freedom for thinner or more complex shells, without running the risk of sudden breakage during drop tests.
What sets K1622P apart results from the way we manage every part of its production. We never cut corners with resin drying or temperature control. The final granules have almost no residual moisture, which prevents bubbling and hydrolytic breakdown in tough mold cycles. We perform melt index tests often during production runs to avoid wide batch-to-batch swings in flow rates. Our team tracks intrinsic viscosity and polydispersity index at multiple checkpoints. This workflow means K1622P users rarely see surprises in performance—one of the most common reasons it ends up preferred for repeated, long-term manufacturing contracts.
We built our lines for minimal contamination because even a speck of foreign matter carries through in the finished part. From raw pellet feeding to extrusion, we maintain a dust-controlled environment, and change resin filters regularly to keep inclusions under industry standards for critical optics. For projects like lighting diffusers or automotive interior panels, this attention to detail pays off where clarity and defect-free surfaces are mission critical.
K1622P handles repeated melt and regrind cycles well, without serious loss of mechanical strength or optical clarity. Our own lab technicians subject it to accelerated weathering and UV exposure, so users can plan outdoor durability or harsh environment installations without fear of premature yellowing or embrittlement. Machining and drilling after molding won’t chip or crack the part, due to the stress-relief procedures we follow before packaging and shipping.
We manufacture millions of tons of PC resin each year, but K1622P frequently receives praise from line operators and molding engineers. They tell us shot consistency and part-to-part repeatability stays high even after hundreds of cycles. Problems like surface splay or voids appear less than with many generic PC resins. This positive record comes out in smaller scrap ratios and fewer returns at the customer end.
Resource savings influence every decision we make. We recover process heat during K1622P production. Our water systems run in closed loops, which reduces waste. All secondary emissions move through scrubbers and filters to meet regulatory controls. Material traceability remains linked to each batch—many of our biggest customers conduct their own audits and leave satisfied with both quality and environmental management. With tightening expectations for low-outgassing and hazard-free components, our strict selection of raw inputs pays off by keeping unwanted additives out of K1622P’s supply chain.
Compliance rests on more than paperwork. We keep LUPOY K1622P on RoHS and REACH lists, backed by regular external laboratory testing—much of it initiated by demanding manufacturers who need independent proof. Our internal standards advance alongside international regulations, so molders can ship globally with confidence in product suitability. We follow the protocols for food-contact and medical-resin processing, but always advise customers to check the end-use scenario with our lab because trace residues, though extremely low, may influence certain certifications or regional standards.
Most OEMs and custom molders ask for strong mechanical strength, clarity, thermal stability, and a consistent mold cycle window. K1622P answers with a resin backbone robust enough for snap-fit joints and thin ribs, yet flexible enough to avoid cracking under quick tool ejection. Automotive suppliers appreciate lower rates of stress whitening and improved part ejection, especially where glass fiber or mineral fillers become necessary. For transparent or lightly tinted parts, designers enjoy easy coloring in masterbatch blending without muddiness or streaking.
Our customers move away from generic or bulk PC resins after running into issues with yellowing, inconsistent flow, or strange odors during molding. LUPOY K1622P handles these problems straight out of the bag. The difference shows in the resin’s lower impurity levels, improved thermal oxidation resistance, and absence of off-gassing or static build-up. Unlike some commodity polycarbonates, K1622P supports automated assembly processes better, as fewer surface defects or deformations show up on finished goods.
Process stability allows for shorter molding cycle times and less machine downtime, which makes a measurable difference over a high-volume project’s lifespan. We see device makers commit to K1622P after running side-by-side mold trials against other PC grades and watching their rejection rates fall. Part geometry comes out sharply defined, and touch surfaces stay smooth without requiring post-mold finishing. Modified formulations work seamlessly with reinforcing agents, flame retardants, and color masterbatches—each tested to avoid any negative side effects in mechanical testing.
As manufacturers, we see hundreds of varieties of PC resin samples cross our QA benches each week. For K1622P, we screen each batch using laser diffraction for size distribution and infrared spectroscopy for chemical uniformity. These tools catch a range of off-spec incidents—anything from under-polymerized material to slight monomer contamination gets caught long before product leaves our warehouses. Hot-runner molders need pellet homogeneity, and our process focuses on achieving that consistently.
Cycle efficiency matters on a modern production line, and K1622P brings predictable release profile and clean de-mold without sticking. Technicians eliminate many headaches from warping or part retention by using K1622P, which saves hours in tool cleaning and mold maintenance. Material dries to proper levels much quicker than standard grades, which helps on lines switching frequently between resin types.
Within our PC lineup, some projects demand even more heat resistance or a customized impact rating. While K1622P meets broad industry requirements for clarity, thermal stability, and basic impact, users should compare it to our high-heat or impact-modified products for cases involving constant flame exposure or heavy drop loading. We guide customers through testing protocols for demanding transportation or heavy-duty industrial parts so that their safety margins never rely on guesswork.
Every year, repeat orders for K1622P come from tool shops and end-use brands who value consistency over a long product launch. They value K1622P’s clean finish, its sturdiness, and the substantial reduction in process variability it delivers. They mention reduced visual defects, stable dimensions, and reliable color matching from lot to lot. This reliability means their own after-sales and warranty costs shrink—a major advantage in industries where recalls or returns damage relationships and profit alike.
Material science keeps evolving, and customers expect new features like greater heat aging performance, lower carbon footprint, or bio-based content. Our R&D team experiments with feedstock sources and process optimizations regularly. K1622P’s strong foundation, free from unnecessary additives, supports these upgrades without sacrificing legacy compatibility. We engage directly with automotive Tier 1s, white goods leaders, and medical device innovators at the development phase, learning about their emerging challenges and translating them into new material properties or process enhancements.
Digitalization and automation drive new requirements for resin flow, laser marking, and robotic assembly. K1622P aligns smoothly with these trends. Surface energy remains uniform, accepting paint or direct printing for identification codes or decorative layers. In-mold labeling and insert molding work with K1622P, eliminating downstream operations and strengthening part structure. 3D scanning of finished parts shows tighter dimensional tolerances, simplifying quality control during high-volume runs.
Our relationship with molders and component builders extends beyond resin delivery. We provide troubleshooting guides, mold design input, and on-site technical advice. Process engineers rely on our feedback when adapting a design for K1622P, ensuring no nasty surprises during scale-up. We document and share lessons learned from past projects, focusing on practical issues like venting, gate location, or tool cavity surface finish. Our team speaks from first-hand shop floor encounters—not just theory. This collaboration helps reduce learning curves and smooths out the transition from prototype to steady-state production.
Material integrity depends on careful packing and shipment. K1622P ships in multi-layered moisture-barrier bags, sealed directly off the compounding line. Warehouse policies minimize storage times, supporting a just-in-time delivery model that keeps fresh resin in the hopper. We keep tracking systems for every outbound lot. This lets purchasers trace resin back to its original polymerization batch, which builds trust and accountability through every point in the supply chain.
In climates with high UV or humidity, product integrity sometimes becomes the deciding factor for material choice. K1622P performs well in tropical regions and high-altitude installations without sudden drop-offs in mechanical strength or dramatic yellowing. End users in automotive and outdoor electronics markets appreciate reliable weather resistance and stable impact properties long after the warranty ends. Our feedback loop from customers in these environments directs any required formulation tweaks or testing protocol upgrades.
Over the lifetime of a molded part, the unseen difference between a reliable and an inconsistent polycarbonate shows itself in maintenance, part replacement, and brand reputation. By delivering a resin with a stable quality profile, K1622P enables our customers to run longer campaigns without disruptions. We see companies build their own products’ reputations around the dependability of our materials, a benefit that translates into stronger market positions and higher levels of user satisfaction.
Our staff participates every year in conferences and workshops dedicated to improving polycarbonate resin performance and application development. This active engagement gives us early insights into changing regulatory landscapes and new technical challenges on the horizon. K1622P forms the baseline for these innovations, because it combines robust chemical and physical characteristics with the adaptability so often demanded in today’s quickly evolving markets. We keep open communication with design engineers, production managers, and procurement teams, channeling that feedback into process upgrades, lot testing procedures, and even new polymer chemistry directions.
As manufacturers, we know every project and every molding operation carries unique challenges. K1622P grew out of real-world needs: consistent quality, predictable performance, and trouble-free processing. It comes from years of direct experience—listening to customer problems, stress-testing products, and refining every detail in each step of the production chain. No matter the scale of your end use, choosing a material like LUPOY K1622P supports not just your product, but the efficiency and confidence of your whole operation.