| HS Code | 170527 |
| Product Name | LUPOY Polycarbonate (PC) K0445 |
| Manufacturer | LG Chem |
| Material Type | Polycarbonate (PC) |
| Melt Flow Rate 300c 1 2kg | 44 g/10min |
| Density | 1.20 g/cm³ |
| Tensile Strength Yield | 62 MPa |
| Flexural Modulus | 2,250 MPa |
| Izod Notched Impact 23c | 60 J/m |
| Rockwell Hardness M Scale | 68 |
| Vicat Softening Temperature B50 | 146 °C |
| Glass Transition Temperature | 147 °C |
| Molding Temperature | 270-320 °C |
As an accredited LUPOY Polycarbonate (PC) K0445 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | The LUPOY Polycarbonate (PC) K0445 is packaged in 25 kg white, robust plastic bags labeled with product name, grade, and manufacturer. |
| Container Loading (20′ FCL) | The 20′ FCL container loading for LUPOY Polycarbonate (PC) K0445 typically holds around 16-18 metric tons, securely packed in bags. |
| Shipping | LUPOY Polycarbonate (PC) K0445 is securely packed in moisture-protected, sealed packaging, typically in 25 kg bags or bulk containers. It is shipped on pallets, with clear labeling for safe handling. Store and transport in dry, cool conditions, avoiding exposure to direct sunlight and moisture to preserve product quality. |
| Storage | LUPOY Polycarbonate (PC) K0445 should be stored in its original, tightly sealed packaging in a cool, dry, and well-ventilated area, away from direct sunlight and moisture. The storage temperature should ideally be below 30°C to prevent material degradation. Avoid contamination with dust and chemicals. Keep away from sources of ignition, and stack containers safely to prevent damage. |
| Shelf Life | LUPOY Polycarbonate (PC) K0445 typically has an unlimited shelf life if stored unopened in dry, cool conditions, away from sunlight. |
As the original manufacturer of LUPOY Polycarbonate K0445, we supply consistent-grade PC for critical industrial applications. This material supports downstream manufacturers in automotive, electronics, medical device, optical, and construction sectors, catering to strict production demands. Below, we detail real industrial use cases, relevant compliance, blend ratios, processing steps, and the final product range within each application segment.
Tier-1 automotive suppliers rely on our PC K0445 for structural interior and select exterior vehicle applications. The engineering-grade resin handles large-format injection molding for instrument panels, pillar trims, glove boxes, and headlamp housings. Automotive processors formulate PC K0445 to specified impact and UV stability requirements, integrating custom colorants and additives to meet OEM design codes. The production line involves tight tolerance molding and complex secondary finishing, supporting advanced assembly workflows for global vehicle platforms.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Our PC K0445 meets the highest electrical safety and durability requirements for molded device housings, connectors, and switch components in consumer and industrial electronics. Processors use this grade for housing injection molding, overmolding, and insert-molding over metal contacts. Manufacturers obtain consistent dimensional control, flame resistance, and insulation performance critical to electronic product design cycles. The workflow emphasizes stringent handling to prevent surface contamination and ensures traceable resin lots for regulatory audits.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Device assemblers select our medical-grade PC K0445 for key non-implantable applications, including structural instrument components, laboratory automation parts, and reusable sterile packaging. Process engineers ensure sterility through compatible gamma and steam sterilization regimens. During component formation, manufacturers tightly control resin quality, coloring, and surface property modifications to meet specific biocompatibility and traceability mandates. Validation runs include thorough migration and extractable testing, with continuous quality verification under ISO 13485 processes.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
The optical grade clarity and surface toughness of PC K0445 lead to adoption by processors manufacturing optical-disk media, safety lenses, and architectural glazing. Downstream plants execute precision extrusion or low-defect injection molding to yield high-transparency parts with excellent impact resistance and UV durability. The finished sheets and lenses often require further processing, such as anti-scratch coating or laser marking, ensuring compliance with sector-specific optical specs and weathering standards.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Lighting OEMs integrate PC K0445 into LED optical systems due to its excellent diffusion characteristics and consistent color stability. Formulators create blends with diffusing or light-enhancing additives to control luminous flux, haze, and uniformity. Downstream process setups involve high-precision, moisture-controlled injection molding and extrusion for unified light guides and lamp covers. Detailed spectral and photometric testing follows molding, certifying each batch for lighting performance and safety compliance in demanding installation environments.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive LUPOY Polycarbonate (PC) K0445 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8618018036652
Email: sales6@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Building a grade like LUPOY Polycarbonate K0445 takes more than just running polymer pellets. This is a resin we developed for customers demanding excellent impact strength and optical clarity, with reliable moldability each shift, every week, in real-world plant conditions. Over the last decade, we’ve seen polycarbonate push into more technical parts for electronics, electrical housings, automotive glazing, even segments such as medical device covers and industrial lighting. When we worked on LUPOY PC K0445, the feedback from OEMs and toolmakers did not stop at a datasheet. Manufacturing and extrusion teams told us they were fighting cycle time issues and dimensional creep with earlier blends. They needed a transparent resin with a real shot at replacing metals and glass where high strength, ductility, and impact resistance matter—especially in applications exposed to mechanical load, heat, and outdoor conditions.
K0445 is not just another clear polycarbonate for commodity uses. This grade stands out by keeping its toughness without sacrificing molding speed or transparency. We tailored the melt flow properties to suit thin-wall and complex part geometries, so the resin fills deep cavities and long flow paths without creating weld lines or flow marks. During compounding, our technicians watch for not just purity but also stress cracking after demolding. We monitor optical clarity using haze and light transmission tests, ensuring that K0445 consistently hits the target demanded for lighting diffusers or transparent shields. You can mill, drill, or laser-cut parts with confidence due to the resin’s balanced molecular structure—we optimized the chain length for flow with solid resistance to brittleness. That flexibility has allowed customers to shift from glass and metal without taking on the weight, breakage risk, or fabrication limits often encountered in older solutions.
In manufacturing environments, every hour of downtime from inconsistent resin lots means lost earnings. We stepped up our process controls with K0445. Resin batches pass repeated melt flow index checks, impact strength testing (IZOD at different temperatures), and colorimetry to spot shifts in base tint. Sometimes we walk the floor with compounders watching for issues like dust infiltration or pellet deformation during conveying—little things that later affect surface finish and yield. Only resins that meet our test criteria leave the blending line. We stand behind optical polycarbonate not because it survives lab trials but because molding partners push it through high-cavitation tools, secondary machining, and even post-forming without unexpected failures. In busy press rooms where temperature swings are routine, K0445 provides a cycle-to-cycle consistency like few others we’ve run.
Take impact resistance. Standard polycarbonate can underperform if exposed to outdoor UV or secondary heat treatments. We built K0445 for strong resilience, especially where connectors, machine guards, or housings face knocks, vibration, or temperature changes. In high-speed molding or laser marking operations, other resins may warp or discolor. K0445’s stabilized blend maintains clarity and dimension even under demanding cycles. Technicians often remark on how tight the shot-to-shot viscosity stays, making it easier to dial in the same parameters across multiple presses. This grade also resists yellowing longer in lighting parts, avoiding “browning” that hurts product appeal—direct feedback we heard from high-traffic retailers using our resins in display cases.
Real engineering does not stop at the design stage. Molders turning out thousands of housings or covers in a 24/7 operation notice which resins give fewer sink marks, better release, and fewer downstream complaints. K0445 has supported programs where transparency, toughness, and resistance to environmental stress cracking could not be compromised. Unlike basic commodity grades that start with recycled polymer fill, K0445 uses prime raw material streams and tighter filtration during pelletizing. This means fewer gels, fish eyes, or surface blemishes on the finished article.
Electrical safety also plays a role. Polycarbonate is widely known for its self-extinguishing behavior, but flame retardancy can vary among suppliers. Our formulation for K0445 holds up in standard vertical burn tests without additives that degrade surface gloss or change the color balance. For electronic and electrical enclosures, keeping visual finish consistent matters, especially when cosmetic parts sit in full view. Some manufacturers have tried imported grades that show batch-to-batch yellowing or warping as the end product sits in sunlight or under permanent illumination; our quality checks for K0445 specifically target long-term lightfastness for these installations.
Feedback from assembly plants, field repair techs, and end users continues to steer what features we prioritize. Thin-wall diffusers, LED lamp covers, protective shields, and even certain optical lenses rely on K0445’s clear, uniform profile. During production, the resin’s flow lets designers push the envelope with sharper corners and integrated snap-fits without worrying about stress concentration points leading to cracks. Compared to imported generic grades, K0445 users report a lower scrap rate in injection operations, fewer complaints tied to breakage during shipping, and less rework at finishing stages. Where parts call for after-molding painting or metallization, adhesion holds better due to improved surface energy profiles achieved right in the compounding phase, eliminating the need for costly post-treatments.
If you line up K0445 against basic general-purpose polycarbonate, a few differences immediately stand out. Impact resistance stands at the high end of what unfilled PC can achieve without external modifiers. Clarity holds up even after repeated heating for regrind cycles—something we track for customers blending in their own recycled stream up to a controlled percentage. Other commercial grades often trade off clarity for higher melt indices; we tuned K0445 to maintain both, based on feedback from toolrooms running multi-cavity, complex geometries with living hinges or shut-off features.
Stress whitening and cold-craze resistance in K0445 help heavy-use parts stay clear of microcracks, even after years of mechanical actuation or repeated assembly/disassembly. Chemically, the resin resists spotting from common household cleaners, mild acids, and alkaline solutions, which is crucial in appliances and glass-replacement installations. Where competitors lean on anti-UV additives that haze or leach out over time, K0445 integrates stabilization into the backbone, supporting high retention of optical and mechanical properties through extended weathering cycles. Part designers get more leeway in drafting and wall thickness, as the resin can hold intricate ribbing or bosses during rapid fill and cooling without showing flow lines or knit defects.
We see the real test for any resin not in a spreadsheet, but in how it survives downstream assembly, customer handling, and years of exposure. Installers, for example, test housings made from K0445 by repeated fastening and removal—polycarbonate that fails here cracks or loses its holding strength. We receive regular updates from field workers running components outdoors across seasons, noting that parts molded with K0445 keep their properties despite temperature swings, UV loading, and even roadside impacts. We review not just initial break strength, but ductility and resistance to notch sensitivity—the kind of failures that mar otherwise well-designed components in end use.
Polycarbonate manufacturing carries an environmental responsibility. During K0445 production, we continually review energy input, emissions handling, and pellet handling efficiency. Pellet drying protocols are tuned so that moisture uptake before molding stays well below limit, preventing splay and bubbles in transparent parts. Scrap is minimized through inline monitoring. Our customers want not just performance, but also confidence that their resin partner delivers predictable, high-yield material while keeping resource use efficient.
As part of our continuous improvement process, we log feedback on K0445 from high-volume users and lab partners, making incremental modifications to batch formulation, pellet geometry, and even bulk packaging formats. No resin sees release unless it passes a battery of mechanical, optical, and aging tests. Our technical support staff provides direct input to mold maintenance teams troubleshooting issues like venting, residence time, or shear heating; we never outsource this expertise. Customers running multi-shot, multi-material overmolding have highlighted how K0445’s interfacial bonding properties let them expand their product range while lowering cycle times.
End users often overlook how polycarbonate resins evolve from freshly molded to long-term service. In high-traffic zones—think turnstile covers in transit hubs or guards on industrial lines—polycarbonate can show wear or dulling. Our ongoing lab aging studies check for yellowing, brittleness, and surface pitting with K0445. We use real atmosphere cycling with humidity, ozone, and temperature ramps. This tight testing protects customers deploying K0445 in mission-critical applications, such as infrastructure, safety glazing, or control panel covers, where sustained performance is non-negotiable.
K0445’s composition stands out in that it keeps a predictable gloss and avoids brittle transition as conditions push past normal room temperatures. Electricians, for example, have told us about conduit covers and switchgear enclosures where previous polycarbonate options lost their grip or tolerance after months under load. K0445’s molecular structure ensures dimensional retention even under stress, with enough flexibility to take minor impacts or flex without spider-web cracking.
Scrap reduction is a critical factor for high-cavity, automated molding. K0445’s pellet-to-pellet consistency gives molding teams tighter control, whether running high-gloss parts or transparent functional elements. We’ve designed packaging formats that match customer storage and handling routines, from bulk bins to smaller bagged lots where needed. This attention to quality control follows the resin from our blending towers to the customer’s hopper.
In automated plants using robot take-off and part sorting, every fraction of a second saved per cycle scales to tangible productivity gains. We’ve seen customers reduce unscheduled downtime by relying on K0445 for fewer shutdowns tied to streaks, burn marks, or unplanned cleaning. Advanced formulation means less material gets rejected for haze, inclusions, or flow defects common with cheaper polycarbonate options. From our side as the manufacturer, claims and credits for off-quality drops sharply where customers use K0445—another sign that tight process control and careful resin preparation upstream translate directly into customer profitability.
Automotive, electrical, lighting, and safety glazing markets all impose their own hurdles. In automotive, for example, polycarbonate must deliver resistance to chemicals, abrasion, and thermal cycling under sunlight or engine heat. K0445 answers the call by balancing flexibility and heat resistance, reinforcing its usefulness for headlamp lenses, interior panels, and exterior trim exposed to the elements. Our own field teams regularly collaborate on approval cycles with tier suppliers and major automakers, supporting test builds, mold modifications, and coloring adjustments as needed.
In architectural and building applications, polycarbonate windows and panels require a higher standard for impact and weather resistance compared to cheaper plastics. K0445 supports these applications by holding toughness and optical properties even in large-section parts exposed to wind load or vandalism risks. For lighting, clarity and diffusion take top priority. Our on-site teams support lighting OEMs to fine-tune mold design and secondary processing, relying on K0445’s optical grade resin to minimize defects, absorption losses, and inconsistent light transmission.
Our approach to working with designers using K0445 reflects a partnership rather than just material supply. From the concept phase, our technologists engage in joint reviews of drawings, simulations, and mold flow analysis. K0445’s unique balance of flow and impact toughness opens new opportunities in slim profiles, aerodynamically-shaped parts, and integrated mounting features. Parts designed from the start with K0445 avoid much of the post-tooling headaches that come from using general-purpose resins that stretch or distort at the edge of their recommended use window.
Because our technical and manufacturing staff have been directly involved with the rollouts of thousands of products using K0445, our expertise cuts through theory and supports hands-on problem-solving. Mold design, venting, gate placement, and de-molding techniques have benefitted from detailed feedback loops from shop floors and installation technicians. Our support doesn’t end at the spec sheet but continues through service calls, project updates, and ongoing performance tracking. That experience matters, especially in fast-moving industries where speed, consistency, and durability are not up for debate.
Polycarbonate use cases grow more demanding each year. Designers want lighter, stronger, safer, and better-looking parts to stay competitive. As a manufacturer, our responsibility extends past selling a pellet. We work side-by-side with customers to spot issues, troubleshoot process bottlenecks, and recommend manufacturing tweaks that maximize K0445’s potential. Our R&D streams stay active based on plant trials, equipment upgrades, and changes in customer performance standards.
Choosing K0445 reflects a commitment to durability, clarity, and reliability, measured over production runs counting millions of units. We hold ourselves accountable for every batch and every application—letting the results on our customers' floors speak for themselves. This is not simply a resin, but a bridge between chemical science, engineering practice, and product innovation that will keep evolving as customer challenges set new benchmarks.