| HS Code | 416792 |
| Product Name | LUPOY Polycarbonate (PC) ER2201F |
| Manufacturer | LOTTE Chemical |
| Material Type | Polycarbonate |
| Form | Resin |
| Color | Natural |
| Melt Flow Rate | 22 g/10min (300°C/1.2kg) |
| Density | 1.20 g/cm3 |
| Tensile Strength | 62 MPa |
| Flexural Modulus | 2300 MPa |
| Heat Deflection Temperature | 130°C (0.45MPa) |
| Vicat Softening Point | 146°C |
| Flammability Rating | UL94 V-2 (1.5mm) |
| Optical Properties | High transparency |
| Applications | Injection molding |
As an accredited LUPOY Polycarbonate (PC) ER2201F factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | LUPOY Polycarbonate (PC) ER2201F is packaged in 25 kg white polypropylene bags, featuring blue LUPOY branding and product details. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL) for LUPOY Polycarbonate (PC) ER2201F: 17~18 metric tons, packed in 25kg bags, on pallets. |
| Shipping | LUPOY Polycarbonate (PC) ER2201F is securely packaged in moisture-resistant 25 kg bags or bulk containers. It should be shipped in clean, dry conditions to prevent contamination or material degradation. During transport, avoid prolonged exposure to heat, direct sunlight, and impact to maintain product quality and integrity. |
| Storage | LUPOY Polycarbonate (PC) ER2201F should be stored in a cool, dry, and well-ventilated area, away from direct sunlight and sources of heat or ignition. Keep the material in tightly sealed, original containers to prevent moisture absorption and contamination. Avoid exposure to strong acids, bases, or oxidizing agents. Ensure proper labeling and handle in accordance with standard industrial hygiene practices. |
| Shelf Life | LUPOY Polycarbonate (PC) ER2201F typically has an unlimited shelf life if stored in cool, dry conditions and unopened packaging. |
LUPOY Polycarbonate ER2201F supports critical industrial sectors by providing consistent mechanical strength, dimensional stability, and thermal resistance required for demanding end-use applications. Below, we detail genuine downstream pathways where major manufacturers integrate this grade for high-performance engineered parts.
The automotive sector utilizes ER2201F for parts demanding high impact resistance, flame retardance, and dimensional precision under varying thermal loads. Instrument panels, center console trim, and window switch assemblies rely on the grade’s moldability and gloss retention to maintain appearance and function throughout vehicle service life. Process engineers specify ER2201F in compounding and injection molding to achieve demanding tolerances and colorfast finishes, compatible with in-vehicle regulatory standards on VOC and material safety.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Manufacturers of ICT hardware select ER2201F for housings exposed to long-term thermal cycling and electrical stress. Applications include switchgear covers, terminal blocks, and server chassis where flame retardance and dielectric stability are critical. The resin’s hydrolytic stability and low warpage contribute to complex, thin-wall part geometries made through high-speed injection processes, meeting OEM product safety certifications and international electrical standards.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Major lighting OEMs use ER2201F for high-transparency lenses and light guide plates in architectural, industrial, and automotive lighting. Optical-grade compounding preserves light transmission and color neutrality after repeated thermal aging. Precision injection molding at controlled shear rates ensures minimal birefringence and tight dimensional tolerances required for consistent lumen output and sharp cutoff in professional fixtures as mandated by regional electrical and photometric directives.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
ER2201F forms the basis for high-impact-resistant safety glazing used in machinery guards, viewing windows, and protective barriers in industrial and public infrastructure. Manufacturers rely on its high optical purity and resistance to repeated washdowns and chemical exposure. Laminating and thermoforming lines employ this grade to produce complex curvature panels that comply with workplace safety and material strength norms, retaining integrity after high-velocity impacts and temperature swings.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Professional equipment manufacturers integrate ER2201F in transparent or translucent reservoirs, cold or hot water dispensers, and filter housings, chosen for its hydrolytic stability, stain resistance, and food safety compliance. This grade supports high-quality molding performance and dimensional integrity at elevated temperatures, while adhering to stringent food contact and drinking water regulatory frameworks, validated by independent laboratory migration testing.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Manufacturers in the medical technology sector rely on ER2201F for structural enclosures, protective covers, and display lenses in non-implantable electronic equipment and laboratory instruments. The grade supports repeated steam sterilization, chemical wipe-down, and surface disinfection processes. Medical device engineers assess compliance based on biocompatibility, extractables testing, and ISO traceability, with the material entering the value chain through batch certified production and documented lot release testing.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive LUPOY Polycarbonate (PC) ER2201F prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8618018036652
Email: sales6@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
In the plastics industry, the drive for materials that outperform older resin formulations never lets up. Over the years, consumer brands and OEMs have pushed us with new challenges. We’ve seen engineers frustrated with warping or yellowing, manufacturers bumping up against safety codes, and designers asking for colors they said could never work in polycarbonate. LUPOY ER2201F entered our portfolio to meet these daily hurdles found in real-life production, and to advance the way end manufacturers use polycarbonate.
We created LUPOY ER2201F to offer both high moldability and top-tier flame resistance without the typical compromises, especially when building for electronics or automotive interiors. Our teams needed a grade that blends toughness and heat performance, yet remains straightforward to process on standard equipment. That’s no simple feat; over the years, many polycarbonate compounds we tried had to sacrifice strength for easier molding, or gave up clarity to pass flame tests. LUPOY ER2201F brings us closer to a no-compromise resin for high-value applications.
LUPOY ER2201F builds on decades of polycarbonate manufacturing experience. We produce this grade under strict process controls, using our continuous melt-processing lines that have delivered stable product in large volumes to all continents. Polycarbonate ER2201F features a melt flow index in the mid-range suitable for intricate moldings. Its Vicat softening temperature suits demanding applications, especially where the polymer must hold form near hot internals or under direct sunlight. Our lab data reflects an impact strength that outpaces commodity plastics, even compared to general-purpose PC grades. Transparency remains solid in thin-wall uses, helping it appeal to lighting and visual display clients along with the electronics molders.
On top of mechanical and optical strengths, the material achieves recognized flame retardancy—it meets V-2 ratings at common thicknesses according to UL standards. In our experience, achieving that level of resistance while maintaining easy processability and toughness turns into a balancing act during formulation. It took rounds of pilot runs and finer resin compounding techniques to ensure batch-to-batch uniformity, something we know matters a great deal for components bound for safety certifications.
ER2201F finds its way into electrical casings, power tool housings, automotive cockpit parts, office hardware, and even specialized lighting fixtures. Our engineers talk with molding operators regularly; many tell us that with this grade, heating cycles stay stabler, and scrap rates fall because the resin flows predictably even in thin-walled, ribbed or vented designs. That flow consistency gives production planners the edge, especially as toolmakers push for finer feature definition and higher cavity molds. In tooling with deep draws or sharp corners, lower incidence of stress whitening and cracking stands out versus more basic PC grades.
In electronics, flame performance and electrical insulation take priority as regulations tighten. High heat applications were a trouble spot for older polycarbonate grades, with deformities or bubbling after exposure to soldering or PCB operations. ER2201F’s balance of physical and electrical properties lets it cover high-voltage battery modules, switch covers, touchscreen bases, and circuit breaker enclosures. We see minimal ink bleeding and good color hold, important as end customers increasingly demand not just function but product appeal in translucent or colored casings.
Car interiors present their own set of challenges: extreme heat, exposure to UV, and need for robust coloring. ER2201F runs on existing injection lines, even for intricate dashboard bezels and trim where tight tolerances matter. Many partners have told us that surface finish and gloss are reliably high across large part runs. In the lighting sector, designers turn to this resin for both diffusers and LED housings. There’s a need for material that can take the thermal cycling from high-intensity bulbs and maintain both clarity and mechanical structure—a balance we worked to hit with this formulation.
For office electronics, manufacturers using ER2201F report smooth surface finish on molded keyboards, printer parts, and tool handles. Material choices here influence both tactile feel and long-term looks, especially in parts exposed to touch, humidity, and the occasional chemical spill. Molders benefit from fewer flow marks and consistent coloration, avoiding frequent regrinding or extended cycle times that can happen with less advanced resins. Through feedback from these everyday applications, the product has matured as our on-the-floor teams have learned how to tweak process settings, offering us a loop for continuous improvement.
We produce a range of polycarbonate resins, so seeing how ER2201F stacks up against alternatives is part of our responsibility. Commodity-grade polycarbonates tend to underperform in flame resistance and may go brittle or soften in the upper register of recommended operating temperatures. These cheaper grades sometimes claim good impact strength, but in dense or thin-wall tools, failures under drop or stress tests crop up—a scenario less common with ER2201F.
Engineering teams often ask how it compares to filled or blended polycarbonates. Glass-filled PC brings stiffness and higher tensile strength but usually at a cost—less flexibility in mold design, longer cycle times, and a rougher molded surface. ER2201F, on the other hand, keeps high impact strength and processability even in thin-wall features. Customers seeking a certain transparency for lighting or visual inspection windows immediately spot the difference, since glass or mineral fillers ruin clarity.
Versus polycarbonate/ABS blends, some molders like those because they’re even easier to mold and provide better impact absorbance. But, those blends tend not to meet the same flame standards at lower wall thickness. In regulated environments, especially autos and electronics, ER2201F hits the sweet spot: tough enough, good fire-retardance, keeps color, and doesn’t yellow easily in end-use. PC/ABS blends sometimes also lose appearance faster due to environmental stress, especially under repeated cleaning or chemical exposure. ER2201F maintains its look longer because its backbone resists hydrolysis and surface wear.
A few competitors market high-flow polycarbonate variants intended to cut cycle times and fill larger molds. Our data and customer feedback indicate ER2201F still provides adequate flow, but without the loss of toughness or clarity that can follow extreme high-MFR (melt flow rate) tweaks. Parts produced from ER2201F hold shape better over time, even after repeated assembly and disassembly, an essential property for modular consumer device housings.
From a practical point of view, easy processing on standard injection molding lines matters most to plant operators. No one wants to overhaul drying units or upgrade hot runners just to work with a new polycarbonate grade. Our technicians run trial shots on different machines whenever a customer brings in new tooling or switches from a competitor’s resin. They focus on melt temperatures, shear sensitivity, venting requirements, and water content, knowing each variable can cause short shots or cosmetic flaws.
ER2201F performs with less moisture sensitivity than early-generation PCs, reducing both pre-drying time and risks of splay and bubbles in finished goods. In multi-cavity steel tools, material distribution stays true form, lowering reject rates and minimizing gate vestiges. That matters in mass production, where thousands of cycles per shift add up. Our technical staff constantly studies how the resin flows in high-cavitation molds, looking for ways to shave seconds from the cycle while controlling warpage and gloss. Efficiency means more than just throughput—it means reliable, predictable finished goods and less wasted labor troubleshooting process variables.
On the subject of recycling, ER2201F aligns with industry efforts for greater circularity in plastics. Its polymer backbone accepts a defined proportion of regrind without drastic property loss, a relief for customers keen to cut both cost and landfill footprint. We know too much regrind can reduce toughness or transparency, but within recommended limits, most molders get worry-free performance. Our technical center has done life-cycle assessments, weighing energy use across compounding, transportation, and molding, so that we stay in step with sustainability demands from downstream customers.
Our many years in polymer production have taught us that end-user trust ultimately comes from reliable supply and proven, documented performance. Electrical and automotive part buyers do their homework—untested resin grades can stall an entire project, or worse, lead to part recalls. LUPOY ER2201F supplies are backed by internal test data and industry-recognized certifications including UL flame rating. We don’t just publish numbers, we send samples for third-party verification and collaborate with OEM research departments when full material disclosure is on the table.
In the appliance and utility sectors, more stakeholders want assurance about resin safety—this goes beyond flame retardancy and includes migration testing for potential additives and residual monomers. Our laboratory quality managers run regular lot tests for extractables, using up-to-date analysis equipment. Over time, these efforts have built real confidence in the resin for makers of power outlets, switchgear, HVAC components, and low-voltage protection devices.
Manufacturing never stays static. New product designs land on our desks each week: thinner casings, more complex clips, higher cycles under load, bold color targets. We make it a point to train customers in best practices for drying, mold temperature adjustment, shot size calibration, and surface finishing. Many of our technical sales staff come right off the production floor—years turning wrenches, diagnosing splayed parts, and refining start-up parameters. That knowledge gets passed along during pre-shipment trial runs and factory visits, helping molders get up to speed with less scrap and better part yields.
Toolmakers benefit from our willingness to share data on shrinkage, gate design, venting, and release agent compatibility. Constant exchange keeps us learning as well. For example, a few years ago, a tier-one supplier for automotive clusters switched to ER2201F and fed back improvements on weld line strength and sink mark reduction. This allowed us to fine-tune process recommendations for future customers dealing with tight-tolerance lens covers and decorative panels.
We encourage partners to experiment within safe process parameters. Some tune holding pressures or optimize runner balance for their unique parts, checking results with us. This continuous improvement model, where we gather real-world results and feed them back into our development cycle, ensures each batch of ER2201F keeps step with the evolving demands of production operations and regulatory standards.
In the past decade, the bar has only risen for product durability, regulatory compliance, and environmental accountability. New flame retardant standards and safety requirements appear regularly in Europe and Asia, and consumer tech brands boost scrutiny of every component. To stay ahead, our technical and quality teams invested heavily in resin innovation and process analytics. LUPOY ER2201F rises from this experience—not just a single improved grade, but a product model proven over countless field uses and certification tests.
Consumer product designers push for thinner, lighter, and more visually compelling parts. They want housings that can handle drops, thermal shocks, and long exposure to light, all while remaining sleek and on-brand. Molders expect fewer defects, shorter lead times, and straightforward color matching. At every stage, the material sits at the intersection of competing demands. We’ve learned not to chase performance on just one factor. ER2201F blends toughness, moldability, and flame retardance without requiring new investments in tooling or specialized equipment. That’s proven valuable as manufacturing moves to more agile models—or as lines pivot to short runs and rapid prototyping.
Advanced automation and tighter process controls in modern factories raised the stakes for material predictability. No longer can anyone afford a “just good enough” resin with hidden property swings between lots. We commit to lot tracking, sample archiving, and prompt technical trouble-shooting. That’s only possible thanks to years of investment in process repeatability and close partnerships with top suppliers of raw monomers and additive packages. LUPOY ER2201F’s steady performance comes from tight process discipline—not shortcuts or unknown fillers.
Each shift in our production hall poses new questions on heat balance, flow, surface finish and dimensional tightness. We put days into adjusting feeders, fine-tuning compounders, and calibrating reactors. With resins like ER2201F, much of that work pays off: fewer machine stoppages, clearer fill patterns, and more predictable post-mold shrinkage curves. Moldmakers and line operators both benefit when a single resin handles complex multi-component assemblies, soft-touch inlays, or delicate engraving for logos and controls.
Fatigue tests done in our lab and at customer plants show ER2201F outperforms older PC types in retaining ductility under repeated bending or clamping. It matters during repeated assembly in modular device bases or under constant stress at hinges and locks. Color matching stays true after UV exposure, important for both consumer and industrial parts spending years in the field. That level of long-term appearance is a key measure for clients who build medical, automotive, or public infrastructure devices.
Our development team also works in lockstep with partners targeting next-generation safety certifications or energy-use targets. For each new regulation calling for lower flammable content or higher strength at elevated temperatures, we return to the compounding lab and test floor. We use updated equipment to simulate worst-case application environments. Experience shows that robust material is only part of the solution; quick access to technical support, test data, and process troubleshooting is essential for successful adoption in mass production.
Polycarbonate market cycles move fast, with customer expectations constantly growing. We keep teams dedicated to iterative upgrades—chasing both the next big breakthrough and small tweaks that save hours and scrap on the shop floor. Every time partners return with field reports on part breakage, surface haze, or coloring issues, we chart out potential improvements. Over the years, we’ve worked with hundreds of molders and toolmakers across five continents. Their experience flows directly into our quality control and formulation targets.
For future generations of polycarbonate, the key will be flexibility. Regulations, design needs, and processing advances won’t just stabilize; they’ll keep evolving. With LUPOY ER2201F, our aim remains fixed on a practical path—refined recipes, reliable supply, transparent technical support, and an open ear for every feedback loop. For customers demanding the next jump in heat, flame, or clarity, we take each requirement seriously, balancing them in a polymer that stands up to the daily realities of production.
In a market full of claims and competing priorities, our best results arrive from the hard-won trust that comes after years of field performance, test data, and shared problem-solving on the production floor. With LUPOY ER2201F, we believe our past work and day-to-day support make the difference: delivering a polycarbonate that doesn’t just meet the mark in the lab, but in real-world applications, shift after shift.