LG Chem, Ltd

Products

LUPOY Polycarbonate (PC) E2766P

    • Product Name: LUPOY Polycarbonate (PC) E2766P
    • Chemical Name (IUPAC): Polycarbonate, bisphenol A polymer
    • CAS No.: 25037-45-0
    • Chemical Formula: (C₁₆H₁₄O₃)ₙ
    • Form/Physical State: Pellets
    • Factroy Site:
    • Price Inquiry: sales6@ascent-chem.com
    • Manufacturer: LG Chem, Ltd
    • CONTACT NOW
    VTB
    Specifications
    HS Code 943340
    Product Name LUPOY Polycarbonate (PC) E2766P
    Manufacturer LG Chem
    Material Type Polycarbonate
    Form Pellet
    Color Natural
    Melt Flow Rate 300c 1 2kg 6.5 g/10min
    Tensile Strength 63 MPa
    Flexural Modulus 2400 MPa
    Izod Notched Impact 23c 70 J/m
    Heat Deflection Temperature 1 8mpa 127 °C
    Specific Gravity 1.20
    Mold Shrinkage 0.5-0.7 %
    Water Absorption 0.15 %

    As an accredited LUPOY Polycarbonate (PC) E2766P factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing LUPOY Polycarbonate (PC) E2766P is packaged in a 25 kg white plastic bag, labeled with product name, grade, and manufacturer.
    Container Loading (20′ FCL) Container Loading (20′ FCL) for LUPOY Polycarbonate (PC) E2766P: Typically accommodates about 24 metric tons, packed in 25kg bags or suitable packaging.
    Shipping LUPOY Polycarbonate (PC) E2766P is securely packaged in moisture-resistant 25 kg bags to protect against contamination and damage during transit. Shipments are typically palletized and shrink-wrapped for added stability. Store and transport in cool, dry conditions, away from direct sunlight and incompatible materials to ensure product quality and safety.
    Storage LUPOY Polycarbonate (PC) E2766P should be stored in a cool, dry, and well-ventilated area, away from direct sunlight and moisture. Keep the packaging tightly sealed to prevent contamination and degradation. Avoid storing near heat sources or incompatible materials. For best performance, use the product within 12 months of delivery and keep it in its original packaging until use.
    Shelf Life LUPOY Polycarbonate (PC) E2766P has a recommended shelf life of 24 months if stored in original, unopened packaging under dry conditions.
    Application of LUPOY Polycarbonate (PC) E2766P

    Applications of LUPOY Polycarbonate (PC) E2766P in Industrial Manufacturing

    As a manufacturer dedicated to providing advanced polycarbonate materials for industrial production, we supply LUPOY Polycarbonate (PC) E2766P for high-performance, end-use-driven sectors that demand precise engineering, regulatory compliance, and reliable integration within downstream processing environments. Below, we outline applications where this grade meets strict industry requirements, with details on compliance, formulation, production stage, and finished products.

    1. Automotive Headlamp Lenses and Lighting Components

    Automotive lighting manufacturers select LUPOY Polycarbonate E2766P for its optical clarity and heat resistance, making it suitable for lens and light housing fabrication. This material withstands high-intensity light sources and provides long-term dimensional stability, addressing OEM safety regulations and aesthetic requirements. Engineers control the polycarbonate content and processing parameters to balance transparency, impact strength, and UV exposure resistance during injection molding or extrusion.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    2. Electrical and Electronics Housings for Circuit Protection Devices

    Electrical equipment manufacturers utilize PC E2766P in molded housings for circuit breakers, relay covers, and switch casings where flame retardancy, dimensional stability, and insulation integrity are critical. Strict compliance with global and local electrical safety codes directs formulation and molding operations to deliver housings that protect sensitive circuitry and ensure user safety through extensive thermal and impact testing programs.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    3. Medical Device Housings and Diagnostic Components

    The medical device industry integrates PC E2766P for non-implantable enclosures such as diagnostic instrument housings and transparent covers due to the resin’s clarity, sterilization compatibility, and compliance with health-specific material safety codes. Production teams select the resin for its chemical resistance and mechanical strength throughout high-cycle molding and secondary finishing steps, ensuring consistent part geometries and surface cleanliness for direct contact with sensitive analytical and monitoring equipment.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    4. Optical Storage Media Production

    Disc manufacturers rely on LUPOY PC E2766P for manufacturing compact discs, DVDs, and Blu-ray substrates, leveraging its high transmittance, low birefringence, and dimensional uniformity. These physical properties directly affect error rates and data integrity during high-speed stamping and replication. Production environments strictly monitor raw material moisture, cleanliness, and melt-flow characteristics to deliver uncompromised audio, video, or data storage media.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    5. Safety Glazing for Architectural and Transportation Applications

    Fabricators producing transparent and bullet-resistant glazing panels deploy this polycarbonate specification due to its high impact absorption, flexibility for lamination, and clarity. Panels produced from the resin meet mandatory international and regional safety codes, with polycarbonate sheets employed as security glazing layers in banks, public transportation, and building entryways. Sheet extruders and laminators manage usage ratios based on threat levels and product thickness profiles specified in architectural and civil engineering projects.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    6. Food Contact Bottles and Dispensers (Non-Infant)

    For food-grade applications such as refillable water jugs, beverage dispensers, or durable kitchenware, downstream processors utilize LUPOY PC E2766P because it enables repeated washing with high thermal stability and absence of migration beyond regulatory limits. Material suppliers support compliance controls and provide documentation needed for global food safety audits, ensuring the composition remains within accepted tolerances for intended food contact over product lifespan.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    Free Quote

    Competitive LUPOY Polycarbonate (PC) E2766P prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.

    We will respond to you as soon as possible.

    Tel: +8618018036652

    Email: sales6@ascent-chem.com

    Inquiry

    Get Free Quote of LG Chem, Ltd

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    LUPOY Polycarbonate (PC) E2766P: Engineering Strength for Real-World Applications

    Understanding LUPOY E2766P and Its Unique Role in Polycarbonate Solutions

    Polycarbonate has earned its place in industry thanks to its blend of transparency, resilience, and adaptability. Within the global market, LUPOY E2766P draws attention for a reason: it reflects direct responses to requests from product developers and manufacturers who are pushing beyond standard performance. Drawing from our years in polymerization and compounding, we regard this grade as a reliable answer to challenging conditions where safety, clarity, and long-term durability are on the line. Here in the plant, our own feedback loop between production and our technical support teams shapes every batch, keeping us focused on results that customers put to the test in their own facilities—on the shop floor, in labs, and out on the market.

    A Closer Look at the Performance Edge of LUPOY E2766P

    E2766P shows high melt flow, which means injection molding and extrusion lines keep pace even on complex, thin-walled or multi-cavity tools. Customers in electronics and automotive parts production have commented on its ability to fill fine details swiftly without sacrificing molded-in strength. We hear from toolmakers who monitor shutdown scrap rates: they see less waste and fewer flow marks compared to conventional PC. In our own tests, finished parts keep their clarity after long exposure to light and mechanical stress. Bulk shipments reveal consistent color and granule uniformity, which helps reduce color matching headaches in production lines. From our point of view, fewer surprises in processing mean fewer bottle-necks and less troubleshooting, keeping real workdays smoother for plant operators.

    Consistent Properties that Meet Real-World Demands

    Every compounding run for E2766P targets toughness, heat resistance, and reliable impact properties as the core goals. On annual audits, our labs confirm V-2 flame retardance, making this grade a safe fit for items like electrical housings and lighting diffusers. Molded samples resist yellowing—evident when we compare retained gloss between test slabs and competitor products after accelerated weathering. As a manufacturer, we check these claims against customer feedback: electronics firms in humid climates report fewer problems with warping and discoloration, which translates to longer shelf life and less unsold stock. We do not rely on theory; we check molded parts in real cabinets and modules as they ship out, testing mechanical stability at different temperatures before and after processing.

    Clear Differences from Commodity Polycarbonate Grades

    Standard PC grades often make promises around basic durability, but E2766P stands apart for a blend of strength, clarity, and workability. The melt flow index allows for quicker cycle times—a detail that matters if you’re producing at scale and downtime is not an option. In side-by-side press runs, our team records shorter cooling times and more stable dimensions. Workers appreciate the lower tendency for “splay” marks, which can otherwise lead to higher reject rates. In comparison to lower purity PC powders, E2766P retains less internal stress after molding, which shows up six months later as fewer failures under load or thermal cycling. For automotive OEMs and telecom hardware suppliers, this consistent reliability shortens qualification cycles and means their finished parts stay in spec when shipped globally, not just in controlled conditions.

    Practical Choices for Everyday Production

    For molders running thousands of parts per shift, the little differences between PC grades add up. E2766P admits a wider temperature window in molding—something operators appreciate on lines where raw material lots shift and setpoint drift can otherwise lead to stuck parts or flash. Maintenance managers point out the reduction in runner blockages and die wear, which reflects our dedication to batch filtration and thorough drying at the production stage. On assembly lines, downstream processing—whether ultrasonic welding or printing—runs with more predictable adhesion and cleaner print outlines due to the surface quality E2766P provides. The absence of contaminant gels and color streaks means fewer seconds and less manual rework. This comes from our process controls, but the real proof shows up in customer inventory audits that reveal higher first-pass yield.

    Applications Where LUPOY E2766P Stands Out

    Application fields range from end caps and light diffusers in building interiors to battery casings in electronics. One area where our customers regularly highlight success is the production of connectors and switch components. Often, mass-produced connectors face high standards for dimensional stability, especially after soldering or operation in hot environments. E2766P retains tight tolerances even after subjecting molded parts to repeated heating and cooling cycles. In LED lighting—a market where clarity matters as much as toughness— diffusers made from E2766P deliver uniform light transmission, resisting yellowing far longer than commodity blends. Retailers that supply after-market automotive lighting kits report lower warranty claims related to cracking or discoloration after road use.

    We see more companies favor E2766P for transparent covers and sight windows in appliances, where both appearance and the ability to handle accidental impact count. In these settings, part designers have told us that they push wall thickness lower to save cost, and the lower viscosity and high melt strength of E2766P bridge the gap, reducing the risk of burn marks or short shots. This opens up more creative part geometries without sacrificing end-use safety. Our experience has shown that quality control teams find fewer crazing cracks, even after repeated opening and closing in appliance assemblies.

    Specifications Rooted in Real Manufacturing Challenges

    As a manufacturer, we do not chase specs for marketing; we drive parameters that hold up in repeated plant runs and meet demanding supply contracts. LUPOY E2766P falls in the high-flow, high-impact family, classified for use in UL V-2 environments and with a melt flow rate tailored for detailed injection parts. The transparency stably exceeds 85%, which is more than enough for optical lenses in control panels and meters. Cycle times during optimal tool operation cluster close together, so daily output numbers are predictable. Material lots show consistent bulk density and pellet size—our automated screens reject outsized granules before shipment, so hoppers feed smoothly and cause no bridging during dosing. Material drying before molding holds moisture below recommended thresholds, which translates to less risk of splay or hydrolytic degradation in finished parts.

    Processing Experience: Feedback from the Shop Floor

    Few things frustrate production engineers as much as mystery variables on processing lines. Over years of trials with E2766P, our own teams and customers’ crews find set-up easier than most high-flow grades. Operators run barrels at standard PC temperatures and see consistent fill rates, with minimal need to chase recurring adjustments or fight short shots. This gives more flexibility for those running multiple tools in the same workday. Where edge gates are used, less gate blush appears; side gates and hot runners maintain clean shut-off with limited stringing. Our technical support group has walked lines with customer maintenance teams; we see fewer required changes on heaters and screws due to degradation, as the formulation works cleanly even under elevated shear.

    Cycle overruns tally up lost labor over time. In side-by-side trials, molding teams tallied up parts per hour and noted a measurable increase versus mid-range PC grades, with scrap trending downward. For high-gloss parts, post-mold inspection counts show fewer surface blemishes, lowering the tally of regrind and rework. From first barrel purge to end-of-shift shutdown, material run-out is cleaner, and barrels are left ready for start-up without residue. This sort of practical feedback drives our decision to keep producing E2766P at the scales we do. We don’t see value in adding filler materials that complicate blending or slow lines; instead, we stick to a composition that prioritizes operator results.

    Differences from Other Polycarbonate Grades

    Within the LUPOY series and the wider polycarbonate market, E2766P focuses on balancing flow and toughness in high-speed, high-volume production. Some PC grades chase extreme heat resistance or niche flammability, often at the cost of clarity or processability. E2766P blends enough melt strength for complex molding without slipping into brittleness, which is an issue seen in highly glass-filled or unmodified flame-retardant variants. We have tested competitor samples marketed for “universal” use and seen them falter on demanding parts: warping under variable mold temperatures, visible weld lines, or increased stress cracking during rapid assembly.

    We manufacture and supply virgin, unblended stocks—no recalibrated regrind. Customers who have switched from lower-cost, recycled-content PC grades note a sharp drop in batch-to-batch variation across key dimensions. Electrical engineers testing enclosures find better dielectric consistency, and mechanical test labs have charted higher Izod impact rates. For those sensitive to part aesthetics, the haze and yellow index for E2766P rank amongst the lowest in any high-flow polycarbonate we have seen, based on both factory measurements and third-party testing.

    Tackling Industry Challenges with Material Choices

    Polycarbonate users press for reliability during thermal cycling, repeated impacts, or outdoor exposure. We have heard from security hardware clients who struggled with crazing and yellowing from sunlight and cleaning agents. E2766P’s stabilized formulation improves UV performance, so covers and screens last longer in the field. Lighting gear assemblers look for low warpage at assembly—E2766P holds its shape even through multiple cycles of soldering and paint curing. We calibrate our processes to keep volatiles low, aiming for less risk of outgassing during hot stages of downstream processing. This shows up as a lower incidence of blisters when coatings or adhesives are used after molding.

    Tool makers dealing with complex shapes often face trouble filling thin-walled parts. E2766P’s enhanced flow opens up new mold designs and allows shorter cycle times without the trade-off of weaker knit lines. Mold makers provide feedback on lower wear rates, reflecting the high purity and stability of our compounding. The blend handles higher mold temperatures in automotive and appliance applications, which enables glossy, high-transparency surfaces that do not yellow or haze during use.

    Real Feedback: Reliability in the Field

    Over the past two years, a range of industries has migrated key assemblies to E2766P—from medical diagnostics casings to telecom relay guards. We track customer complaints in a hands-on way: the number tied to stress cracking, outgassing, or early discoloration has dropped as processors rely on E2766P for molded parts. Some OEM customers now standardize their entire converter range or enclosure portfolio around E2766P to align with global shipment standards and reduce variation on incoming inspection. Field audits by our engineering support group show that finished parts hold their shape and luster longer than units produced from generic PC, especially where heat cycling and minor impacts are routine.

    Our Approach: Continuous Improvement from the Factory Floor Up

    For us, material development starts in day-to-day factory operations. Every innovation in E2766P grew from watching line workers tweak settings, troubleshoot poor runs, or spot long-term part failures. The result reflects thousands of cycle-hours and dozens of customer visits; recipe changes result from patterns, not hunches. We continue to run test molds using customer-provided tools, and each new improvement—whether in pigment handling or compounding speed—runs its trial on actual factory lines before rolling out.

    Every order and every production run deepens our understanding of real-life performance. Customer-driven iterations keep us honest about strengths and limits. If an automotive exterior part warps or an LED housing discolors, that feedback filters straight back into new batch controls or tweaks in resin selection, not just marketing promises. Ongoing cooperation with plastics engineers, product designers, and line operators means E2766P’s margin of advantage stays rooted in users’ experience instead of lab-only benchmarks.

    Supporting the Industry: Practical Solutions for Pacing Change

    Technical change rarely stands still. Demands for low-carbon manufacturing, tighter part tolerances, and new end-use certifications push material expectations higher. E2766P addresses these shifts by staying easy to process on existing lines, not requiring wholesale re-tooling or complex additive packages. On the shop floor, customers appreciate not having to re-certify old molds or rewrite handling guides, shaving weeks off new part launches. We keep documentation close to tested reality with batch-traceable COAs and rapid feedback channels for troubleshooting.

    The real mark of a material’s value comes after months in the hands of operators, assemblers, and end-users. We invest in keeping E2766P’s targets focused on daily reliability, cost-per-part, and physical appearance as measured in thousands of production cycles. Our development teams remain in touch with line supervisors and plant engineers, not just sales, so concerns are heard and reflected in continuous improvements. In turn, the resource savings for our customers show up as higher margins, less downtime, and fewer interruptions—an immediate impact recognized by those with firsthand responsibility for turnaround times and field service.

    In Summary: The Manufacturer's Perspective on Value

    Decades of manufacturing and customer interaction molded our approach to LUPOY Polycarbonate E2766P. From day one, our team steered this grade toward bridging the demands of speed, strength, and visual quality. Each batch draws on lessons learned from real failures, and every improvement aims at measurable outcomes: reliable molding, long-term part integrity, operator-friendly processing. Direct feedback from line workers, plant managers, and field inspectors continues to shape what E2766P delivers. Whether your needs center on transparent housings with strong impact resistance or mass production of intricate, finely detailed molded parts with predictable results, E2766P brings the consistency and performance required in modern manufacturing. Our focus stays on genuine value measured by operational ease, durability, and practical innovation rooted in everyday plant life.