| HS Code | 343172 |
| Product Name | LUCON (Conductive Compound) |
| Appearance | Black pellet |
| Base Resin | Polypropylene |
| Filler Type | Carbon black |
| Electrical Resistivity | 10^2 - 10^4 ohm-cm |
| Melt Flow Index | 5-15 g/10min (230°C/2.16kg) |
| Density | 1.05 g/cm³ |
| Tensile Strength | 18 MPa |
| Elongation At Break | 35% |
| Processing Temperature | 180-220°C |
As an accredited LUCON (Conductive Compound) factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | LUCON Conductive Compound is packaged in a 1 kg white plastic jar with a secure screw cap and clear labeling on the container. |
| Container Loading (20′ FCL) | 20′ FCL container loading for LUCON (Conductive Compound): typically accommodates 18–20 metric tons, packed in 25 kg bags on pallets, secured for safe transport. |
| Shipping | LUCON (Conductive Compound) is shipped in sealed, chemical-resistant containers to prevent leakage and contamination. Packages comply with relevant safety regulations, including proper labeling and documentation. During transport, the compound is protected from extreme temperatures and physical damage. Shipping is managed by certified carriers trained in handling industrial chemicals safely and efficiently. |
| Storage | LUCON (Conductive Compound) should be stored in a cool, dry, and well-ventilated area, away from direct sunlight, heat sources, and moisture. Keep the container tightly closed when not in use to prevent contamination. Avoid storing near incompatible materials such as strong oxidizers. Properly labeled, the storage area must comply with relevant local, state, and federal regulations for chemical safety. |
| Shelf Life | LUCON (Conductive Compound) has a typical shelf life of 12 months when stored in tightly sealed containers at recommended conditions. |
As a dedicated manufacturer of conductive compounds, we supply LUCON to key processing sectors where antistatic, electrical, and dissipative properties are essential. Our expertise covers several industrial downstreams, each with unique technical, regulatory, and process integration demands.
Electronic assembly and component manufacturers apply LUCON to produce antistatic films safeguarding sensitive devices during transport and storage. The compound supports controlled surface and volume resistivity within required ESD ranges while maintaining transparency and mechanical integrity. Formulation balances are closely managed to satisfy packaging line requirements for film extrusion and downstream lamination.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Automotive OEMs enhance plastic components with LUCON masterbatches to enable electromagnetic shielding and static control in dashboard panels, sensor housings, and electronic enclosure parts. We design formulations to meet precise automotive OEM quality audits, maintain UV stability, and achieve stable conductivity throughout injection, extrusion, and thermoforming cycles.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Manufacturers of cleanroom systems and pharmaceutical plant builders use our conductive compound to ensure static-dissipative flooring panels and wall elements meet strict contamination and safety requirements. We tailor formulations for epoxy, PU, or PVC matrices to help downstream partners consistently produce flooring systems conforming to relevant GMP and ESD control protocols.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Cell manufacturers employ LUCON to impart defined conductivity or antistatic performance to battery separator films, preventing charge buildup without compromising separator porosity or battery ionic transport. Compound selection and dosage are precisely regulated, considering battery cell type, electrolyte compatibility, and downstream roll-to-roll coating process requirements.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Wire and cable producers use LUCON compounds to provide controlled anti-static or conductive pathways within sheathing and insulation, critical for data, power, and telecommunication cables in hazardous or high EMI environments. Processing parameters address extrusion temperature management, compound dispersion, oxidation stability, and end-use certification.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Producers of 3D printer filaments supply industrial users seeking conductive properties for functional prototyping, jigs, and fixtures. LUCON enables filaments with defined conductivity suitable for low-voltage applications and ESD protection. Material selection and compounding consistently match nozzle temperature limits, print resolution requirements, and finished part reliability targets.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive LUCON (Conductive Compound) prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8618018036652
Email: sales6@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
LUCON isn’t an off-the-shelf compound found in every corner of the market. As a chemical manufacturer, direct feedback shapes every batch we make. Over the years, clients across electronics, automotive, smart packaging, and specialty films have asked for something beyond commodity products—something that consistently delivers conductivity without trading off processing stability or mechanical performance. LUCON grows out of that back-and-forth.
From the outside, conductive compounds come in many model numbers, often grouped by their filler and resin type. LUCON blends carbon-based additives—like graphite, CNT, or carbon black—with thermoplastics such as polyethylene or polypropylene. Choice and dosage of the conductive additive make a noticeable impact: strength, surface resistance, processability, even the finished part’s appearance. In our facility, we've seen how small tweaks ripple through the final product. A fraction of a point extra filler can drag down tensile strength, but finesse keeps assets like antistatic function or EMI shielding at their best. Over hundreds of production runs, these differences become obvious in customer plant trials.
We see LUCON pulled into three main areas: electronics trays, fuel system components, and smart packaging films. Electronics still demand the lowest levels of resistivity, sometimes down to just 103 ohm/sq. Getting consistent properties in such a narrow range helped us fine-tune our compounding techniques—higher shear mixing, controlled dosing, staged temperature profiles. Each win in production stability means fewer rejected batches on a customer’s extrusion or injection molding line.
Automotive clients, especially those supplying EV components, want parts that pass ESD and EMI tests but also withstand heat and vibration. LUCON’s specifications include surface resistances as low as 104-106 ohms, but we don’t stop with a datasheet figure. Our technical team spends hours next to production lines, watching how the compound fills a mold, listening to customer complaints, and solving flow marks or weld line weaknesses. In packaging, especially anti-static or smart tags, the compound must be food contact compliant. By tailoring the resin grades and using pure conductive agents, LUCON lines up with relevant standards—like FDA or EU directives—without resorting to harmful legacy additives.
Two myths float around the conductive compound business. Some believe it’s easy to add more carbon black or graphene, then call a product “conductive.” Others think all conductive fillers act the same way. On our side, adding too much carbon black leads to agglomerates, which show up as black streaks or slugs in the finished plastic. Too little, and surface resistance shoots above spec. Customers rarely want unpleasant surprises in production, especially if they ship parts worldwide.
Another visible difference comes with processing. Low-end compounds often clog screens, jam feeders, or wear out screw barrels prematurely. LUCON models, especially those for thin films or injection molding, run clean for hundreds of kilos at a stretch. Our own maintenance logs show the advantage: less downtime, fewer scraping tools, happier equipment operators.
At the molecular level, dispersion of conductive particles determines both final conductivity and process stability. Over the years, we’ve invested in high-torque twin-screw compounding lines, precision feeding, and continuous online monitoring. Some formulations include functionalized surfaces on fillers, so they bond better with the polymer—raising the bar on both electrical performance and long-term durability.
Off-brand conductive compounds often stick to either extreme: some are engineered for the lowest price per kilo, others boost their specs far beyond real-world values but compromise toughness or process ease. Our experience with LUCON comes from years of solving the pain points that reach actual operators. The real test isn’t just what happens in the lab—it’s how batches behave at volume, under a client’s actual running conditions.
Consider conductive compounds made only with carbon black. Their resistivities fluctuate. Moisture in the plant, a bad mix angle on a feed hopper, or aggressive extrusion conditions produce visible weak spots. LUCON incorporates multi-modal carbon systems and sometimes nano-additives, depending on the end-use. These fill in the “dead spots,” giving surfaces consistent readings and no missed zones—essential for ESD packaging or precise electronics.
Graphene or carbon nanotube-based compounds trade at higher prices. Some have remarkable conductivity, but they may pose compounding challenges—clumping, filter fouling, or unstable blends. LUCON integrates select nanocarbon sources but balances them with proven processing aids. Our operators report stable flows and less downtime, which translates to fewer stoppages on downstream customer lines.
A few resin suppliers offer anti-static masterbatches as substitutes for true conductive compounds. These may suffice for basic static reduction, but won’t pass the tests required in automotive fuel components or molded trays used in sensitive chip manufacturing. LUCON delivers actual conductivity, measured batch-to-batch—not an “antistatic” effect that might fade or dissipate under heat and load.
Procurement managers often gripe about consistency. Out-of-spec batches mean unpredictable downtime. As chemical manufacturers, we map out every production lot—linking back to raw material lots, blend rationales, extruder runs, and even humidity readings. The most valuable upgrades often don’t involve patented formulas, but adjustments learned from field failures. For example, a customer’s injection mold jammed repeatedly with a market standard compound. A tweak in our mixing stage delivered a LUCON grade that passed 1,000 cycles without a single hang-up.
Which LUCON model lands in a customer’s order depends on resin base—either LLDPE, PP, or special blends—and the targeted surface resistivity or mechanical strength. Our production records show that LUCON PE/CB-13 and LUCON PP/CNT-08 meet most tray and fuel-tank liner jobs, while special runs feature unique ratios or food-safe ingredients. The R&D team reviews data from every shift for both electrical performance and molding feedback. Patterns emerge: compounds mixed at too high a shear rate see filler degradation; ones with slow feed rates may leave visible filler pockets.
Besides processability, regulatory compliance enters into almost every order for electronics and packaging applications. Wherever possible, LUCON models draw from food-grade resins and additive packages vetted by EU and FDA standards. Regular audits and traceable batch testing keep us ready for customer or auditor inspections without scramble.
Calls often start the same way—from the plant floor. An operator asks why their current conductive compound leaves streaks, clogs, or shortens tool life. Fixing this involves more than lab tweaking; it requires running real lines, watching failures, and listening to maintenance teams. Some plants operate 24/7, so downtime is measured in thousands of dollars an hour. LUCON models field-tested for these customers run smoother, generate fewer fines, and leave tools in service longer.
A chronic problem in the segment involves shifting requirements. Regulatory limits on certain additives—like banned PAHs or heavy metals—mean off-brand products can fail compliance audits years after installation. LUCON ingredients are sourced and tracked to meet tighter EU and North America thresholds, so customers don’t get burnt down the line. In-house GC and FTIR checks keep us sharp on both expected and off-spec contaminant signals.
On the sustainability front, some plants request compounds using post-consumer or bio-based resins. This switch changes flow rates, stability, even color. Our team runs pilot batches, then adjusts mixing profiles and additive blends so LUCON delivers both electrical and mechanical requirements. Implementation draws on R&D, operators, and customer QA—resulting in a compound that meets real production needs, not just catalog claims.
Every few months, we round up field data—customer process records, complaint logs, and shift reports. With LUCON, gains have rarely come from guesswork; nearly all stem from gritty production lessons. For example, thicker-walled molded parts often develop surface defects at standard filler loads. By varying particle sizes and optimizing the compounding sequence, LUCON grades now produce smooth finished surfaces alongside low resistance.
Sometimes the customer’s machine, not the compound, causes problems: inconsistent back pressure, warped extruder barrels, or worn screws. Our technical team runs joint trials, isolates variables, and tweaks the formulation only after ruling out upstream equipment issues. This focus keeps adjustments grounded in reality, not generic trial-and-error.
Differences between LUCON and typical commodities show up sharply under stress. Many compounds deliver only during lab-scale trials. LUCON holds up under high-run hours, operator changes, and material fluctuations—the sorts of things that can throw off average compounds.
Long-term performance matters, especially for companies supplying safety-critical parts. Conductive compounds exposed to cycles of heat and pressure often lose effectiveness after months or years. Our accelerated aging tests, conducted alongside client QA teams, confirm that LUCON blends retain both resistivity and mechanical properties beyond target lifespan targets. For electronics and automotive uses, this means reduced warranty claims and field returns.
Our maintenance logbooks and customer conversations show how the real-world cost of a compound stretches beyond sticker price. Downtime for cleaning, tool swaps, or rejected batches quickly outweighs a few cents saved up front. As a manufacturer, we keep our focus on the realities customers face: product consistency, process stability, and compliance confidence.
LUCON continues to evolve. Each year brings new challenges—tighter specs, unfamiliar regulatory hurdles, unexpected raw material shifts. As a production team, we don’t chase every technology fad, but we do adapt fast. Dozens of test lots, real machine trials, and open communication with end-users shape every product tweak. Our belief rests not on lab claims, but on measurable, repeatable results that survive the jump from test line to full-scale, multi-shift production.
Product transparency builds lasting trust. We provide file-level technical data with every order, and operators can speak directly to our compounding engineers for troubleshooting. If a customer spots drift in resistivity or notices a haze in their film, our QA and technical staff pull archived production samples, run comparison tests, and provide actionable correction steps. Data records aren’t reprints from lab runs—they reflect actual plant runs, weather shifts, and real input grades.
As customers ramp up for new launches or face seasonal capacity swings, our plant maintains stable lead times by forecasting both raw material needs and trending product adaptations. Collaboration extends outside our walls: end-users share production numbers, swap ideas on new grades, or flag early warning signs of regulatory or market shifts.
LUCON is no generic blend. Its reputation and performance connect directly to the people who make it—compounding operators, R&D chemists, process engineers, and field advisers—all committed to keeping the product fit for the realities of customer production lines.
Regulatory, technological, and supply chain pressures shift each year. Customers face tough choices between price, compliance, production throughput, and risk. LUCON’s place comes from a legacy of solving problems hands-on, staying responsive during supplier instability, and not hiding behind vague product promises. Whether a customer faces a unique ESD challenge or wants to swap feedstocks for greener polymers, we’re ready to adapt and prove the compound meets new needs.
Every innovation in LUCON starts with a real-world challenge: a defective tray, a process bottleneck, a new compliance deadline, or an unexpected outage caused by a generic compound’s shortfalls. Experience on the plant floor proves there’s no shortcut around experience, direct communication, and persistent improvement. For production managers, batch operators, and QA teams who need a compound that won’t let them down, LUCON has grown up inside the factory, alongside their challenges, ready to meet the next demand.