| HS Code | 640423 |
| Type | Photo Imageable Dielectric |
| Abbreviation | PID |
| Dielectric Constant | 3.0-4.0 |
| Glass Transition Temperature | 150-200°C |
| Cure Method | UV exposure and thermal bake |
| Thickness Range | 5-100 microns |
| Resolution | 10-20 microns |
| Adhesion | Strong adhesion to metals and substrates |
| Moisture Absorption | <1% |
| Thermal Expansion Coefficient | 30-60 ppm/°C |
| Chemical Resistance | High to acids and bases |
| Color | Typically transparent or light yellow |
| Surface Finish | Smooth and planar |
| Applications | IC packaging, PCB buildup layers, redistribution layers |
| Processing Compatibility | Compatible with standard photolithography |
As an accredited PID (Photo Imageable Dielectric) factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | The PID (Photo Imageable Dielectric) is supplied in a 500g light-resistant bottle with tamper-evident seal, labeled with safety instructions. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL): Efficiently packed PID (Photo Imageable Dielectric) ensuring safety, stability, and compliance for international shipment in 20′ containers. |
| Shipping | PID (Photo Imageable Dielectric) is shipped in sealed, moisture-resistant containers to prevent contamination and degradation. The containers are typically cushioned inside sturdy, labeled boxes, and include handling and storage instructions. The shipment requires temperature-controlled conditions, avoiding exposure to light and humidity, and complies with relevant chemical transportation regulations. |
| Storage | PID (Photo Imageable Dielectric) should be stored in a cool, dry, and well-ventilated area away from direct sunlight and sources of heat. Keep the containers tightly closed and avoid exposure to moisture and strong oxidizing agents. For best performance, store PID at temperatures recommended by the manufacturer, typically between 5°C and 25°C, to maintain product stability and efficacy. |
| Shelf Life | Shelf life of PID (Photo Imageable Dielectric) is typically 6-12 months, stored unopened at 5-10°C, away from light. |
As the original manufacturer of photo imageable dielectric, we supply advanced materials specifically engineered for microelectronics, semiconductor, and high-density circuit industries. Below, we detail verified application pathways in real industrial contexts, outlining compliance, formulation, integration stage, and end product categories for each downstream use.
HDI PCB production applies photo imageable dielectric as an insulating and encapsulating layer between fine-pattern copper circuitry. Manufacturers formulate the dielectric to achieve consistent film thickness, critical via reliability, and superior insulation properties in compact PCB architectures for telecom, networking, and server devices. Integration requires strict control of solvent content, viscosity, and photo patterning parameters to meet high aspect ratio via quality demands.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Wafer foundries and OSATs utilize photo imageable dielectric to define redistribution layers (RDLs) and encapsulated microstructures during advanced wafer-level package fabrication. The dielectric must exhibit high photo sensitivity, low residual stress, and superior adhesion to metals or passivation layers, as any defect affects device reliability. Film parameters and cleanroom environmental control prove critical for achieving defect-free step coverage and consistent curing.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Display manufacturers employ photo imageable dielectric for pixel isolation, passivation, and as a buffer between transparent electrode layers in TFT-LCD and OLED arrays. Purity, transparency, and process latitude matter for maintaining display clarity and minimising leakage current across microcircuit arrays. Thin, pinhole-free dielectric coatings support high-resolution patterning essential for large-area, defect-free displays.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Advanced packaging substrate makers incorporate photo imageable dielectric as both insulation and structural base in build-up multi-layer process flows. It enables fine-pitch via formation above existing copper features and supports ultra-thin, high-density assemblies required for next-generation computing and graphic cards. The dielectric chemistry influences via fill quality, line edge roughness, and high-frequency signal integrity.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
MEMS device manufacturers leverage photo imageable dielectric for pattern-defined encapsulation, micro-cavity formation, and electrical isolation of moving parts. The dielectric must maintain dimensional stability during photolithographic steps, withstand mechanical stress, and not outgas under vacuum packaging conditions. Proper application yields high-yield, reliable inertial sensors, microphones, and optical MEMS arrays.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive PID (Photo Imageable Dielectric) prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8618018036652
Email: sales6@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Every year, customers visit our plant seeking answers about advanced microelectronics materials. Among the topics, Photo Imageable Dielectric, or PID, grabs their attention. We make PID here because the electronics world keeps pushing for thinner, more complex circuits. From smartphones to automotive radar, people want smaller devices with more horsepower, so every layer must do more than it did just a few years ago.
We manufacture multiple PID models that meet a variety of thickness and resolution needs. For example, our most requested product, PID-2000, delivers stable dielectric performance down to 10 μm thickness. This sort of product came out of real demand from semiconductor packaging lines. One customer was struggling with delamination on a multilayer flex substrate; PID-2000 stuck right down, covered the copper traces, and held up even under repeated thermal cycling, which saved them an entire rework line.
For years, building multiple layers on organic substrates meant working with traditional liquid or dry film dielectrics and complicated masking processes. Those methods introduced unwanted steps; printing and curing layers, patterning with basic etching, then cleaning up the mess. Once PID arrived, everything changed. It exposed, developed, and cured cleanly, allowing manufacturers to place microvias, openings, and fine lines directly with UV light. This streamlined everything. In our experience, using PIDs cuts layer buildup times by almost 40% compared to older approaches.
Customers always ask about the difference between traditional coverlays and PID. Coverlays, whether polyimide or other thermoset films, serve excellently in many mass-production settings—think simple flexible circuits with generous line spaces. Problems start to show up when designs cross over to high-density interconnect (HDI) structures or require multi-level via chains. PID steps in, producing crisp features that ordinary coverlays simply cannot manage.
The biggest pain point for most manufacturing partners lies in registration accuracy and yield loss. One global device-assembler found their yields falling every month as their devices shrank. They switched a single process line to PID-2000. Over the next quarter, their scrap rates dropped 25% due to fewer misaligned layers and almost zero blown vias.
A critical aspect of PID performance comes from controlled gap filling. In our lab, we see traditional dielectrics overflowing over uneven copper, creating bulges and unpredictably thin pockets. Our photo imageable film, thanks to carefully engineered viscosity and photoinitiator blend, flows sharply along copper edges without significant overburden. Process teams love how this reduces the need for post-curing polishing and repairs.
We test each batch for key properties. Volume resistivity, breakdown voltage, and moisture absorption top the list. Our PID-2000 routinely gives over 1015 Ω·cm for volume resistivity and survives 2000 V breakdown, even after soaking in autoclave conditions. Lower water uptake means that device performance remains stable during years of cycling through summer and winter field conditions.
PID goes beyond just squeezing more lines onto a substrate. Most operators find the biggest productivity leap comes from maskless processing. Instead of cutting up sheets or stenciling patterns, teams load up the substrate, spin or curtain-coat the PID, run a pre-bake, then expose to UV through a phototool. On a recent project, one customer jumped from eight-step lamination to four steps with PID. Half the labor, fewer defects, lower power draw for the ovens.
Fine feature definition stands out, especially as circuit density rises and end devices keep getting smaller. With PID-2000, reliable feature sizes below 15 μm line/space regularly show up under the microscope after development. Other dielectrics we tested began breaking down or bridging at anything below 30 μm. The UV-defined process offers repeatable feature resolution without shifting or blurring that sometimes plagues older thermal-cured films.
Some designers still use solvent-developable dielectrics due to legacy equipment or conservative approval cycles. In daily practice, those need harsher chemicals for pattern development. Disposal bills can pile up fast, and prolonged exposure sometimes undercuts copper adhesion. PID uses water-based or low-impact developers. Waste management headaches ease off, employees work in safer environments, and there’s far less fume buildup on the shop floor.
Thermal-cured materials continue to appear in low-cost segments, but as soon as a job requires microvia stacking or embedded passives, issues crop up. PID tolerates multiple re-exposures and post-curing bakes. In re-entrant via work, this makes a difference—no bubbling, no excessive shrinkage, and dielectric constant stays within spec because the polymer backbone resists over-curing.
Getting these films to stick cleanly to various substrates—especially rough copper—is no trivial task. We worked several years to tune the surface energy of PID-2000, blending adhesion-promoting groups right into the backbone to target copper oxides and gold-flashed bumps alike. We run thousands of peel tests monthly, pulling up strips of film from both OSP-treated copper and ENIG pads. Peel strengths stay consistent, with no surprise failures after environmental aging.
Long-term moisture pickup creates headaches for reliability. Water trapped in dielectric layers can drive out ions, lead to dendrite growth, or jumpstart delamination. Through material development, we refined filler selection and crosslinking, so our PID traps less water than most epoxies in the same thickness range. Plated through vias running through PID-2000 show tight impedance control even after three months in saturated humidity chambers.
Designers have started stacking three or four PID layers to localize circuits, mount RDL (redistribution layer) wirings, or bump up test points. We see this trend in both chip-scale packaging and large-format sensor modules. Transitioning to multilayer stacks brings a fresh set of integration challenges. Early trials revealed warping or “dish down” around densely patterned padfields. By modifying the PID resin blend with low-shrinkage acrylates, we nearly eliminated these warping effects, preserving planarity for next layers.
Each application runs into process quirks. Some teams prefer curtain coating for speed, others stick with spin methods for small runs. PID’s thixotropy fits both systems. We supply data on optimal bake and cure windows for every batch shipped. This hands-on approach let a mobile chip packaging client ramp production three months ahead of schedule, since they didn’t waste time troubleshooting unexpected process shifts.
Market demand keeps moving towards tighter lines, lower RC delay, and higher frequency stability. Research here focuses on new oligomer systems and advanced photoinitiators to take resolution from 10 μm toward 7 μm without breakdown or overswelling in developer. We test new monomers regularly, trying to match low dielectric constant with mechanical toughness. There’s always a tradeoff—go too soft, and via integrity suffers; go too brittle, and cracking emerges under flex cycling.
Environmental compliance now factors into every formula revision. PID-2000, along with our latest lines, contains no halogenated additives and passes REACH and RoHS protocols for electronic goods. Manufacturing feedback loops uncovered areas for improvement in solvent handling and recycling. Before the switch, scrap rates from edge bead buildup approached 8%. After moving to more tightly controlled PID dispensing, waste dropped and operator turnover also fell as workflow stress eased.
Many design houses want to go straight from drawing board to roll-to-roll production. Real-world implementation demands direct collaboration with the manufacturers making the actual film. Customers send their substrates, we run short pilot lines, and real tweaks follow. We sometimes change photoinitiator ratios based on the exact UV exposure setup in their plant. On lines using high-power LEDs for patterning, we shifted the spectral absorption profile of our PID, shaving 20% off total exposure time without sacrificing resolution. Small changes like these matter on lines pushing over 100,000 units per day.
Typically, factories have to recalibrate their imaging optics or cleaning systems for the smallest traces. Less-experienced teams often underestimate how surface residue or subtle imbalance in pre-bake can impact via yields at scale. We seed training programs with every first shipment, sending out our own process engineers to help tune up ovens, exposure heads, and development baths. One case stands out—after a customer review, we spotted vapor-phase condensation above the development tank, which led to fine dusting on photo layers. Simple improvement in air sweep solved what had looked like a chemical issue. Years making PID taught us that real-world performance depends as much on field support as fancy molecular design.
No one wants their product to fail two years after release. We stack cross-sectioned samples of PID-2000 under the microscope every week, checking wall angles, resin infiltration, and via fill. On a series for a telecom partner, the lines needed to support GHz signals at low crosstalk. With PID, we hit target dielectric constant and dissipation factor, with failures coming only when pushed far past spec. This assurance lets our partners design tighter, faster circuits without second guessing every design tweak.
Making high-resolution PID isn’t the cheapest route for every producer. Upfront material costs run higher than legacy thermosets, and not every factory can manage UV patterning or the controlled bakes without new capex. Over the long run, high yields and rework savings tip the balance. We advise new adopters to start pilot runs, not make whole-line conversions on day one—gradual integration lets teams modify their lines, retrain operators, and spot quirks early, without driving up defect rates.
Small features always bring new headaches. Drilling microvias, especially stacked ones, risks resin overflow, smear, or incomplete plating. We tweaked our PID-2000 photobase to keep sidewalls crisp through back-to-back exposures. This hands-on benefit doesn’t show up in theoretical performance charts—but it keeps final yields where they need to be.
As microelectronics races forward, PID manufacturers must stay in front of reliability, environmental, and performance demands. Our research team partners with substrate suppliers and OEM engineers to roll out experimental lines long before consumer device launches. In a recent co-project, we joined forces with a wearable device group aiming for flexible displays less than 1 mm thick. Standard coverlays couldn’t flex without cracking, while epoxies failed at low temp bends. Our redesigned PID achieved sufficient flex modulus and still met insulation targets after 100,000 flex cycles.
5G, IoT, and automotive radar require materials that don’t just keep up with speed but with reliability and signal clarity. PID’s low dissipation factor and consistent thickness control give circuit designers a safe window in which to push signal speed. We regularly see our materials stand up in head-to-head trials with world-leading competitive products. Teams depend on us not for generic chemical supply, but for bench-tested, line-ready solutions.
Margins matter. Space, time, and defect count can make or break a production line. We learned the hard way—by scrapping hundreds of meters of coated product, resetting exposure times after lamp upgrades, and chasing new adhesives for oddball metals. Every batch of PID undergoes real environment simulation before release. No shipment leaves until peel strength, UV exposure latitude, and ionic purity clear the bar. During one memorable holiday rush, a utility blackout hit during a major batch cure; our automated monitors flagged the process drift, saving the entire run from going out with hidden flaws. Investing in failure prevention pays for itself with every satisfied customer.
Direct communication can solve most process bottlenecks. Early customers sent back pre-production runs covered in micro-bubbles or irregular window shape. On-site reviews showed mismatched bake profiles. Our team didn’t just adjust PID hardener ratios; we stood on the line with operators, rebuilding the heat profile for the specific oven. Post-fix, the ready-to-ship rate jumped to 98%.
At its best, PID brings together materials expertise, process engineering, and practical shop-floor learning. Customers don’t just get a stack of chemical drums—they get a partner who’s spent years making sure that every roll, sheet, and layer of PID delivers on its promise in the world’s most demanding lines.