LG Chem, Ltd

Products

Butadiene

    • Product Name: Butadiene
    • Chemical Name (IUPAC): buta-1,3-diene
    • CAS No.: 106-99-0
    • Chemical Formula: C4H6
    • Form/Physical State: Gas
    • Factroy Site:
    • Price Inquiry: sales6@ascent-chem.com
    • Manufacturer: LG Chem, Ltd
    • CONTACT NOW
    VTB
    Specifications
    HS Code 464535
    Cas Number 106-99-0
    Iupac Name Buta-1,3-diene
    Molecular Formula C4H6
    Molar Mass 54.09 g/mol
    Appearance Colorless gas
    Odor Mild aromatic or gasoline-like
    Boiling Point -4.4°C
    Melting Point -108.9°C
    Density 0.621 g/cm³ (at 20°C)
    Vapor Pressure 2,355 mmHg (at 20°C)
    Solubility In Water 1.1 g/L (at 25°C)
    Flash Point -85°C (closed cup)
    Autoignition Temperature 420°C
    Explosive Limits 2.0–11.5% (in air)
    Refractive Index 1.430 (at 20°C)

    As an accredited Butadiene factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing Butadiene is typically packaged in 200-liter steel drums or pressurized gas cylinders, clearly labeled with hazard warnings and a 100 kg net weight.
    Container Loading (20′ FCL) 20′ FCL (full container load) of Butadiene typically involves shipping 40–44 steel drums, totaling approximately 16–18 metric tons per container.
    Shipping Butadiene is shipped as a liquefied gas under pressure in specially designed, pressurized tank cars, cylinders, or ISO tank containers. It must be transported according to hazardous material regulations, with proper labeling, ventilation, and temperature controls to prevent accidental release or polymerization. Shipping requires adherence to DOT, IMDG, and ADR guidelines.
    Storage Butadiene should be stored in tightly sealed, corrosion-resistant containers, ideally under a nitrogen blanket to prevent polymerization and oxidation. Storage areas must be cool, well-ventilated, and away from heat, sparks, or open flames, as butadiene is highly flammable. Proper grounding and bonding are essential to prevent static discharge. Storage vessels must comply with applicable regulations for flammable gases.
    Shelf Life Butadiene typically has an indefinite shelf life under proper storage—cool, dry, well-ventilated conditions, away from heat and ignition sources.
    Application of Butadiene

    Applications of Butadiene in Industrial Manufacturing

    Butadiene is a key petrochemical intermediate relied upon by industries for producing a wide spectrum of polymer-based materials and chemical derivatives. Our material is integrated into established downstream manufacturing where purity, process consistency, and adherence to stringent compliance requirements drive technical performance and final product reliability. The following sections outline four major application scenarios, detailing their regulatory landscape, formulation usage, process introduction, and finished product portfolio.

    1. Synthetic Rubber Production for Tire Manufacturing

    Tire industry leaders rely heavily on butadiene-based synthetic rubber, especially styrene-butadiene rubber (SBR) and polybutadiene rubber (PBR), to deliver both performance and durability required for end markets ranging from passenger vehicles to aircraft. Formulators carefully balance butadiene feed ratios to optimize abrasion resistance, low-temperature flexibility, and treadwear characteristics. Process integration starts with solution or emulsion polymerization units, demanding strict purity and inhibitor management for consistent polymer chain growth throughout large-scale, automated plant operations.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    2. Acrylonitrile-Butadiene-Styrene (ABS) Resin Manufacturing

    Butadiene functions as the core elastomer phase in ABS resin, conferring critical impact resistance and processability needed in consumer electronics, automotive interiors, and injection-molded engineering parts. ABS producers must tightly control butadiene polymerization within continuous emulsion lines to achieve precise particle morphology and rubber particle dispersion, which directly impacts the mechanical geometry and performance of finished goods.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    3. Nitrile Rubber (NBR) for Oil-Resistant Seals and Gaskets

    Industrial and automotive sealing manufacturers select nitrile rubber for its superior oil, fuel, and chemical resistance, achieved through copolymerization of butadiene with acrylonitrile. The butadiene ratio directly influences flexibility and glass transition properties, which determines the performance envelope of NBR-based seals in extreme service environments such as hydraulic systems, static and dynamic engine parts, and chemical plant equipment.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    4. Chloroprene Rubber (CR) Manufacturing

    Chloroprene rubber producers use butadiene as a foundational feedstock for the synthesis of chloroprene monomer, which is then polymerized to generate neoprene compounds essential for industrial hoses, coated fabrics, cable jackets, and corrosion-resistant linings. Engineering teams precisely operate dehydrogenation and chlorination steps to minimize by-product contaminants, thereby ensuring consistent physical elastomer properties for downstream compounding.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    5. Adiponitrile Production for Nylon 6,6 Synthesis

    The nylon 6,6 fiber and engineering plastics industry requires significant volumes of adiponitrile, synthesized using butadiene as a primary starting molecule through the hydrocyanation process. This pathway requires precise catalytic conditions to maximize yields and minimize unwanted oligomers, with butadiene purity directly impacting nylon resin color and polymer chain length consistency during subsequent polycondensation.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    Free Quote

    Competitive Butadiene prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8618018036652 or mail to sales6@ascent-chem.com.

    We will respond to you as soon as possible.

    Tel: +8618018036652

    Email: sales6@ascent-chem.com

    Inquiry

    Get Free Quote of LG Chem, Ltd

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    Butadiene: Engineered by Manufacturers for Polymer Progress

    What Butadiene Brings to the Table

    Butadiene stands out as a core building block in the synthetic rubber and plastics universe. Every day, manufacturers rely on it for versatile performance. From my years overseeing its large-scale production, I’ve watched butadiene shape pivotal materials, especially synthetic rubbers like styrene-butadiene rubber (SBR) and polybutadiene rubber (PBR). These base ingredients drive the tire industry and give structure to various technical products. Our model, referred to in-house as “BD-12,” has qualities tuned for major polymerization processes, where reactivity and purity take center stage.

    Specs that Matter to Production

    Manufacturers ask about purity, and with good reason. Our butadiene offers a minimum assay of 99.5%, with moisture and acetylenic impurities at levels below 10 ppm. Why these numbers? Higher purity ensures downstream polymerizations run smoothly, yielding reliable product performance. Impurities, no matter how minor, can disrupt catalysts and end up costing both time and resource. Routinely, our analytical team tracks and keeps those thresholds in check, using validated gas chromatography protocols. Our butadiene ships in pressurized, high-integrity containers, maintained at sub-zero temperatures so every shipment meets its original spec on arrival.

    Where Butadiene Shows Its Strengths

    Tire manufacturers count on the flexibility of SBR and PBR for treads and sidewalls. These materials combat abrasion, resist cracking, and push back against the elements riding over roadways year after year. Automotive seals, hoses, and gaskets also lean on butadiene-based elastomers, adding life to engine compartments and undercarriages. I’ve walked customers through production runs where compromises in monomer purity lowered yields and led to out-of-spec batch rejections. A stable, pure feedstock of butadiene prevents those headaches and sets the groundwork for better production cycles and lower waste.

    Comparison to Other Petrochemical Monomers

    Butadiene doesn’t operate in a vacuum. Several other monomers compete for attention in polymer plants: ethylene, propylene, and isoprene, to name a few. Each claims its own territory. Ethylene feeds polyethylene chains—good for flexible packaging but less elastic than butadiene-based rubbers. Isoprene sits closer to natural rubber, maintaining resilience but at higher costs or tighter supply constraints. Propylene builds on toughness, showing up in construction and textiles. Butadiene carves its niche in flexibility, low-temperature resistance, and bounce—critical for tire tread durability, heat resistance, and impact absorption.

    From Extraction to End Use: Insight at Every Step

    In our facilities, we source butadiene as a co-product from steam cracking light hydrocarbons, mostly naphtha or ethane. The separation process—fractional distillation, followed by extractive distillation—lets us tailor output to commercial and specialty users alike. Over the years, investment in continuous distillation and online purity monitoring helped slash downtime and breakpoints. Many operators overlook how much control over thermal gradients and feed ratios can maximize butadiene yield while minimizing side product formation. The difference between 97% and 99.5% has outsized effects downstream in both batch and continuous polymerization plants.

    Handling and Safety Demands

    Butadiene is flammable and a simple asphyxiant, with health risks tied to inhalation of vapors. Storage and transfer can’t leave room for error. Our process lines carry redundant leak-detection, vapor recovery, and flame-arresting hardware, because a single misstep invites risk across the plant floor. Over the last decade, stricter controls and training made near-miss incidents rare. We use double-walled tanks with valve locking protocols, and emergency drills with both our internal team and local fire services. Our responsibility as a primary producer doesn’t end at product quality—it extends to environmental stewardship and workforce safety every hour butadiene is on site.

    Butadiene’s Real-World Impact in Manufacturing

    Rubber isn’t the only destination. ABS (acrylonitrile butadiene styrene) plastics rely on a controlled butadiene stream for their improved impact resistance and heat stability. Business machines and consumer appliances, from printer housings to helmets, include this plastic for good reason. We’ve worked with injection molding partners who report that minor changes in butadiene content shift flow properties, affecting cycle time and final product gloss. The value comes in consistent monomer supply—a problem when the market tightens due to unplanned cracker outages or regional logistics issues. That’s why we expanded local warehousing and railcar loading facilities, holding back dedicated supply for customers whose plants can’t afford line stops.

    Facing Supply Fluctuations: Manufacturer Realities

    Petrochemical plants often run at capacity, and upstream outages can shrink volumes overnight. Over two decades, we learned to buffer production with flexible sourcing, tapping both internal cracker streams and off-spec refiners from regional partners. Unscheduled downtime is costly for the customer—especially in sectors like automotive, where delays propagate across just-in-time inventories worldwide. Those who depend on us want guaranteed product, so we operate redundant purification trains and invest in real-time inventory tracking. Building out these systems wasn’t optional—it kept us on contract during hurricanes, labor stoppages, and once-in-a-decade freeze events.

    How Environmental Standards Are Shaping Butadiene Manufacturing

    As global and regional standards grow more rigorous, emissions control and waste abatement play a bigger role in production. We reengineered vapor recovery networks, capturing fugitive butadiene for reprocessing instead of allowing releases. Water and soil monitoring, historically seen as box-checking, became an everyday discipline. Our team swapped older seal materials for low-permeation alternatives and converted loading operations to closed-loop transfer systems. Each change came at a price, but for a substance with known handling hazards and environmental risks, it’s the only sensible approach.

    Why Purity Metrics Set Us Apart

    Competitors often reference the same assay percent, but application testing separates the good from average. Fine-particle SBR latex or medical-grade polybutadiene reacts quickly to traces of acetylene or high-boiling residue left behind in insufficiently refined butadiene. We maintain tight process control throughout stripping and distillation, and our product consistency holds across multi-year supply contracts. This means fewer surprises for technical teams formulating glassy, impact-resistant resins or ultra-bounce sports surfaces. Several customers shared feedback after batch trials that validated the incremental gains—lower reject rates, higher conversions, and less downtime when switching between downstream monomers.

    Butadiene in a Shifting Market Landscape

    Demand for tires, consumer goods, medical devices, and wire coatings grows every year, but so do calls for alternative feedstocks and green chemistry. Bio-based butadiene is a topic of real debate in industry circles. Our pilot plants have run small batches from renewable ethanol and biomass-derived intermediates. Current yields and costs don’t match conventional naphtha crackers, yet performance differences narrow with every trial. Market acceptance will hinge on both regulatory incentives and technical validation from end-users, particularly those looking to curb their carbon intensity without losing material performance. As a primary producer, we stay ready for process adoption as soon as commercial reality catches up.

    Exporting Reliability: Logistics Matter in Butadiene Delivery

    Transport offers distinct technical tasks—pressurized tank cars, marine iso-tanks, and complex customs paperwork. Butadiene degrades with oxygen and moisture, and small leaks during transit can trigger quality downgrades. As a rule, we partner with specialized haulers, inspecting every vessel and railcar before use. Climate influences everything; a delivery in coastal humidity needs different precautions than shipments through the dry, high plains. Our field logistics team audits routes for both transit time and ambient temperature spikes, reducing surprises and claims. These investments often go unnoticed until a supply chain event reveals their importance.

    Technical Service on the Ground

    Unlike commodity traders, our technical service teams spend time at customer sites, watching real-world polymerizations and troubleshooting beyond the lab bench. Nine times out of ten, issues aren’t in the core chemistry; they come from small deviations—temperature drift, antistatic additives leaching, minuscule changes in catalyst ratios triggered by outside weather. Having firsthand feedback from operators running daily production shifts gave us tools for meaningful improvement. This loop—taking plant-level experience and folding it back into upstream butadiene purification—reduced callback rates and kept downstream blends consistent enough for tight QC standards.

    Where Production Scales Up or Down

    Every petrochemical setup faces cyclical shifts. Tire manufacturers forecast based on auto sales, appliance producers respond to housing and electronics markets, and the building sector rides infrastructure trends. No one can afford inventory pile-ups or unplanned outages. Our plant schedules include flex-capacity runs—ramping butadiene output up and down in days rather than weeks. This capability, years in the making, came from modular reactor designs and improved thermal integration. The commercial payoff? More reliable, on-time deliveries during both market upswings and contractions, with less flare-off and fewer excesses to manage downstream.

    Learning from Decades on the Plant Floor

    There’s nothing abstract about working with butadiene. The process starts every morning with tank readings, real-time GC charts, and noise checks on pump motors. Shifts finish only when every load-out valve clears inspection and transfer logs match plant throughput. Training stays hands-on. New operators rotate through every unit operation, learning the sound of a properly running compressor from its rhythm. More than once, timely intervention—informed by pattern recognition and on-the-job memory—kept incidents from escalating. These human safeguards complement high-dollar automation; both matter for consistent product.

    Outlook: Continuous Improvement and Collaboration

    Butadiene will keep driving advancements in polymer materials and synthetic rubber technology for years to come. It serves flexible, resilient, and cost-effective roles in massive industries that aren’t going away. The best progress still comes from listening to the needs of those most dependent on quality and delivery. Collaborating with rubber compounders, plastics formulators, and even academic labs allowed us to fine-tune not just the specification sheets but the application results everyone measures in the real world. After decades pushing for both reliability and innovation, I see the greatest gains in those moments when every step of the chain—production, safety, transport, application—moves in concert, from the tank farm to the final molded part.